Sensors
-
Balluff BKT 21M-002-P-S4 Contrast sensor, PNP, NO/NCVendor: BalluffSKU: BKT000YThe BKT 21M-002-P-S4 is a contrast sensor with a PNP output configurable for normally open or normally closed switching. It detects contrast differences on a sensing surface using a glass front element, housed in a powder-coated aluminium and zinc die-cast body rated IP67 for...
-
Balluff BES M08MI-PSC40B-S49G Inductive sensor, PNP, NOVendor: BalluffSKU: BES01ZWBalluff’s standard inductive sensors are ideal for object detection in metal areas. They are short-circuit protected and operate without contact, making them wear-free and very resistant to dirt and contamination. The sensors are available in configurations from 3 mm Ø to 80 × 80...
-
Balluff Inductive standard sensor, PNP, NO, M12, flush, M12 3-pinVendor: BalluffSKU: BES00PWThis inductive proximity sensor detects metal targets at a rated operating distance of 4 mm and provides a PNP normally open switching output. The M12x1 flush-mount housing, rated IP68, suits installation directly into metal panels or machine frames where the sensor face sits level...
-
Schneider Pressure switch, adjust. scale 2 thresholds, 0/10bar, 1c/oVendor: Schneider ElectricSKU: XMLB010A2S11This pressure switch monitors fluid or air pressure within a 0 to 10 bar adjustable range and provides output via a single changeover contact. Two independent thresholds can be set on the scale, allowing separate switching points to be configured for control or alarm...
-
Schneider Limit switch, cats whisker, snap action, NO/NCVendor: Schneider ElectricSKU: XCKD2106P16This limit switch uses a cats whisker (plunger on spring loaded element) actuator with a total length of 142mm, operating with snap action contacts in NO + NC configuration. It carries a contact current rating of 10A and a switched voltage of up to...
-
Balluff Inductive standard sensor, PNP, NO, D6.5, flush, M8 3-pinVendor: BalluffSKU: BES00ZUThis inductive sensor detects metal targets at a rated operating distance of 2 mm and provides a PNP normally open output switching at up to 5000 Hz. Its D6.5 stainless steel housing with flush mounting suits installation in confined spaces where the sensor face...
-
Balluff Inductive standard sensor, PNP, NO, M8, flush, M8 3-pinVendor: BalluffSKU: BES00MUThis is an M8 inductive sensor with a flush-mount stainless steel housing, providing a rated operating distance of 1.5mm and a PNP normally open switching output. It operates from 10 to 30 VDC, offers a switching frequency of 5000 Hz, and connects via an...
-
Schneider Inductive sensor, brass, M18, 12 - 24VDC, 2mVendor: Schneider ElectricSKU: XS218BLPAL2This inductive sensor detects the presence of metallic targets without physical contact, making it suitable for position and object detection tasks on automated machinery. Housed in a brass M18 body, it operates on a 12–24VDC supply and is supplied with a 2m cable for...
-
Schneider Electromechanical pressure sensor, 2 c/o, 300barVendor: Schneider ElectricSKU: XMLA020A2D11This electromechanical pressure sensor detects hydraulic or pneumatic pressure and switches at a rating of 300 bar, providing an electrical output when the set threshold is reached. It is fitted with 2 c/o (change-over) contacts, allowing simultaneous control or signalling of two independent circuits...
-
Balluff Pressure-rated inductive sensor, PNP, NO, M18, flush, M12 4-pinVendor: BalluffSKU: BHS001NThis M18 flush-mount inductive sensor detects metallic targets at a rated operating distance of 1.5mm and provides a PNP normally open output via an M12x1, 4-pin A-coded male connector. The stainless steel housing and IP68 rating suit pressure-rated applications and washdown or harsh industrial...
-
Schneider Inductive proximity sensor, 2-wire, M30, 2m cableVendor: Schneider ElectricSKU: XS2M30MA250This M30 inductive proximity sensor detects the presence of metallic targets without physical contact, using a 2-wire connection for simplified wiring into existing control circuits. It is supplied with a 2 metre cable for direct connection to a control panel or junction box. Typical...
-
Balluff Inductive standard sensor, PNP, NO, M8, flush, M12 4-pinVendor: BalluffSKU: BES00P2This inductive sensor detects the presence of metallic targets without physical contact, providing a PNP normally open output. The flush M8 housing allows mounting level with surrounding material, making it suitable for installation in confined spaces on machinery or panels where side clearance is...
-
Balluff Inductive standard sensor, PNP, NO, flush, M8 3-pinVendor: BalluffSKU: BES0180This M8x1 inductive sensor detects metal targets without contact, providing a PNP normally open output for interfacing with PLC or relay inputs. Flush mounting and a rated operating distance of 1.5mm suit installations where the sensor must sit level with surrounding metalwork, such as...
-
Balluff Pressure-rated inductive sensor, PNP, NO, M12, flush, M12 4-pinVendor: BalluffSKU: BHS0033This inductive sensor is designed for pressure-rated applications requiring flush mounting in an M12, 12mm diameter housing. Constructed from stainless steel with a PTFE support ring, it provides a PNP normally open output with a rated operating distance of 1.5mm and an IP68 ingress...
-
Balluff BMF 235K-PS-C-2A-PU-02 T-slot sensor, PNP, NO, 2mVendor: BalluffSKU: BMF00ARThis is a magnetic T-slot sensor designed for direct mounting into cylinder slots, providing position feedback on pneumatic actuators. It has a PNP normally open switching output, an operating voltage range of 10-30 VDC, and a rated operating current of 200 mA, with a...
-
Balluff Inductive standard sensor, PNP, NO, M12, flush, M12 4-pinVendor: BalluffSKU: BES01C7This is an inductive proximity sensor with an M12x1 threaded brass housing and PNP switching output, designed for flush mounting in metal surfaces. It detects targets at a rated operating distance of 4mm and connects via an M12, 4-pin male connector, operating on 10–30...
-
Balluff Inductive standard sensor, PNP, NO, M8, flush, M8 3-pinVendor: BalluffSKU: BES00P7This inductive sensor detects the presence of metal targets without physical contact, switching a PNP normally open output when an object enters its rated sensing distance of 2mm. Its M8 flush-mount stainless steel housing suits installation in confined spaces or areas subject to mechanical...
-
Balluff BMF 307K-R-AS-L-3-03 T-slot sensor NO, 2 wireVendor: BalluffSKU: BMF008PThis inductive sensor is designed for short-distance detection with a 5 mm sensing range and an M12 housing. It features an integrated amplifier and is suitable for applications requiring reliable object detection in tough industrial conditions.
-
Balluff Pressure-rated inductive sensor, PNP, NO, M12, flush, M12 4-pinVendor: BalluffSKU: BHS001LThis inductive sensor is a pressure-rated M12 device with a stainless steel housing, designed for flush mounting in applications where the sensing face may be exposed to pressurised environments. It provides a PNP normally open output with a rated operating distance of 1.5mm, operating...
-
Balluff Inductive standard sensor, PNP, NO, M12, flush, 3m PVCVendor: BalluffSKU: BES00P9This inductive sensor detects metal targets without physical contact, switching a PNP output on target detection. Its M12 flush-mount housing allows installation level with surrounding metalwork, making it suitable for confined mounting positions where side clearance is limited. Supplied with a 3 metre PVC...
