Safety Controller and Relay
-
Pilz Safety relay, Standalone, plug-in, screw, 3NO+1NC, 24VDC, 2.5WVendor: PilzSKU: 777355Two-hand control relay to EN 574, Type IIIC, for two-hand control devices on presses and punches in the metalworking industry. Monitors synchronous operation and provides protection against bypass. Suitable for applications up to PL e of EN ISO 13849-1 and SIL CL 3 of...
-
Pilz Expansion module, failsafe, dual-pole, 24V, 2WVendor: PilzSKU: 773812This expansion module is a failsafe, dual-pole device operating from a 24 V DC supply with a power consumption of 2 W. It provides two analogue inputs supporting both current and voltage signal types, allowing safety controllers to be extended with additional analogue monitoring...
-
Pilz Safety relay, 2-channel wiring, 3.5W, 24VDCVendor: PilzSKU: 750126This safety relay is designed for 2-channel wiring configurations, providing monitoring of safety circuits within control panels. It operates on a 24VDC supply with a power consumption of 3.5W. Typical applications include machine safety circuits where dual-channel input monitoring is required, such as emergency...
-
Pilz Safety relay, 3NO+1NC, 24 - 240VAC/DC, 6AVendor: PilzSKU: 777306This safety relay provides 3 normally open and 1 normally closed contact configuration, rated for a current of 3-6A, and accepts a supply voltage of 24-240V AC/DC. It is housed in an ABS UL 94 V0 enclosure with AgCuNi contact material, and terminates via...
-
Pilz Safety relay, 1/2-channel wiring, 2NO, screw, 24VAC/DCVendor: PilzSKU: 774303This safety relay provides 1/2-channel wiring with 2NO output contacts, operating from a 24 V AC/DC supply. It is fitted with screw terminals for fixed connection and is housed in a compact enclosure suitable for DIN rail mounting within control panels. Typical applications include...
-
Pilz RFiD safety switch, 2 safe SC outputs, 5m, 24VDCVendor: PilzSKU: 541011This RFiD safety switch is used for non-contact monitoring of guards and safety doors on machinery, providing two safe SC outputs for connection into a safety control system. It operates on a 24VDC supply and is supplied with a 5m cable for direct wiring...
