Pilz
-
Pilz Configurable safe small controller, PNOZmulti 2 base unitVendor: PilzSKU: 772101This base unit forms part of the PNOZmulti 2 configurable safety controller system, used to implement safety functions within automation panels and machinery. It operates from a 24 V DC supply, drawing 18.5 W, and is housed in a polycarbonate enclosure sized 45 mm...
-
Pilz Safety light guard, 900mm, type 4, M12 5-pinVendor: PilzSKU: 632065This Pilz safety light guard is a type 4 optoelectronic protective device measuring 900mm, fitted with an M12 5-pin connector for wiring into safety circuits. It operates over a range of 0.2 to 18 metres and is designed to detect personnel presence at hazardous...
-
Pilz PSEN op cable axial Connection cable, PUR, M12, 5-pole, yellow, 5mVendor: PilzSKU: 630311This connection cable links PSEN safety sensors and switches to control systems using an M12, 5-pin female connector with an axial orientation. The PUR housing suits use in industrial environments, and the cable carries a current rating of 4 A. It is finished in...
-
Pilz PNOZmulti Chip card, 1 piece, 8 kBVendor: PilzSKU: 779201This chip card is used with the PNOZmulti configurable safety system to store the safety circuit configuration created for the base unit. It has a memory capacity of 8 kB and is supplied as a single unit. The card allows the safety programme to...
-
Pilz PNOZsigma Safety relay, 2-channel wiring, 1NO+1NCVendor: PilzSKU: 750106The PNOZsigma safety relay from Pilz provides 2-channel wiring with 1NO+1NC contact configuration for monitoring safety circuits in machinery and plant applications. It operates from a 24 V DC supply, drawing 3.5 W, and switches loads rated to 6 A under the DC-12 utilisation...
-
Pilz Connection cable, PUR, Yellow RAL1003, shielded, 8-pinVendor: PilzSKU: 630315This is an 8-pin M12 connection cable with a PUR/TPU jacket in yellow (RAL 1003), terminated with an 8-pin M12 female connector, and rated at 2 A. The shielded PUR construction suits use in industrial environments where flexible, oil-resistant cabling is required for automation...
-
Pilz Actuator for coded safety switch, 18x37x18mm(WHD)Vendor: PilzSKU: 541080This actuator is designed for use with coded safety switches, providing the mating component required for non-contact position monitoring on guards and access doors. Housed in PBT, it is compact in size, measuring 18x37x18mm (WHD), suitable for installation on machine guards and panels where...
-
Pilz PNOZ X3 Safety relay, standalone, 3NO+1NC, 24VAC/DCVendor: PilzSKU: 774310The PNOZ X3 is a standalone safety relay providing 3 normally open and 1 normally closed contact configuration, designed for 24 V AC/DC supply. It is housed in ABS UL 94 V0 material with screw terminal connections, suitable for mounting within industrial control panels....
-
Pilz Safety relay, Standalone, plug-in, screw, 3NO+1NC, 24VDC, 2.5WVendor: PilzSKU: 777355Two-hand control relay to EN 574, Type IIIC, for two-hand control devices on presses and punches in the metalworking industry. Monitors synchronous operation and provides protection against bypass. Suitable for applications up to PL e of EN ISO 13849-1 and SIL CL 3 of...
-
Pilz PNOZsigma Safety relay, 1-channel wiring, 3NO+1NCVendor: PilzSKU: 750102The Pilz PNOZsigma is a single-channel wired safety relay with 3 normally open and 1 normally closed contact configuration, designed for monitoring safety circuits in industrial machinery. It operates from a 24 V DC supply, drawing 2 W, and switches loads rated to 6...
-
Pilz PNOZsigma Contact expansion, plug-in screw, 4NO+1NCVendor: PilzSKU: 750107This PNOZsigma contact expansion module is equipped with 4 NO and 1 NC outputs for contact block expansion in safety-related systems. Operating on 24V DC, it provides reliable support for extended safety functions when combined with safety control components.
-
Pilz PSEN cable axial Connection cable, PUR, M12, 8-pole, 30mVendor: PilzSKU: 540326This connection cable links safety sensors and switches fitted with an 8-pin M12 connector to Pilz safety control equipment, using an axial connector configuration. It has a PUR outer sheath, a length of 30 metres, and a diameter of 6.1mm, with a current rating...
-
Pilz Connection cable, PUR, yellow, 4-pin, M12, 10mVendor: PilzSKU: 630302This connection cable features a 4-pin M12 female connector and a PUR outer sheath, supplied in a length of 10 metres with a cable diameter of 5.1mm. It is rated for a current of 4 A and finished in yellow (RAL 1003) for visual...
-
Pilz PSEN opII4H-s-30-120 Safety light guard, protection field 1200mmVendor: PilzSKU: 632067The PSEN opII4H-s-30-120 is a safety light curtain with a protection field of 1200mm, used to safeguard access to hazardous areas on automated machinery and plant. It has a housing constructed from aluminium, PC and zinc, giving it a compact cross-section of 35mm width...
-
Pilz Configurable safe small controller, PNOZmulti 2Vendor: PilzSKU: 772120The PNOZmulti 2 is a configurable safe small controller used for failsafe automation tasks within industrial safety systems. It operates from a 24 V DC supply with low power consumption, and is rated for ambient temperatures between 0 and 60 °C, making it suitable...
-
Pilz PNOZsigma Safety relay, 1/2-channel wiring, 3NO+1NCVendor: PilzSKU: 750104This safety relay from the PNOZsigma range provides 1/2-channel wiring with 3 normally open and 1 normally closed contacts, operating from a 24 V DC supply with a power consumption of 2.5 W. It offers two inputs and one semiconductor output, with a maximum...
-
Pilz Pnoz s Terminator plugVendor: PilzSKU: 750010The Pnoz s Terminator plug is an accessory for use with Pilz Pnoz s series safety relays. It terminates unused connections on the device, allowing correct configuration within a safety circuit. It is typically used on control panels where Pnoz s modules are installed...
-
Pilz Safety relay, 1/2-channel wiring, 2NO, 24VAC/DCVendor: PilzSKU: 774607This safety relay operates with a 1/2-channel wiring configuration and provides 2 normally open contacts, supplied at 24 V AC/DC. It accepts two inputs and switches safety-related loads with a maximum current of 6 A on both AC1 and DC1 duty. The device is...
-
Pilz Safety light guard, type 2, 1050mm protected field, 24VDCVendor: PilzSKU: 630726This PSEN safety light guard from Pilz is a Type 2 hand protection device with a 30mm resolution and a protected field height of 1050 mm. It operates on 24 V and provides reliable safety for industrial applications, offering robust protection against accidental hand...
-
Pilz Expansion module, failsafe, dual-pole, 24V, 2WVendor: PilzSKU: 773812This expansion module is a failsafe, dual-pole device operating from a 24 V DC supply with a power consumption of 2 W. It provides two analogue inputs supporting both current and voltage signal types, allowing safety controllers to be extended with additional analogue monitoring...
-
Pilz Contact expansion module, 2NO, 24VDCVendor: PilzSKU: 750108This contact expansion module adds two normally open contacts to a Pilz safety relay or safety controller system, operating from a 24 V DC supply. It provides one input and one semiconductor output, with a maximum switching current of 3 A on both AC1...
-
Pilz Configurable safe small controller, fieldbus module, EtherCATVendor: PilzSKU: 772136This module is a fieldbus interface for Pilz's configurable safe small controller range, providing an EtherCAT slave connection. It operates on a 24 V supply with a power consumption of 0.9 W, and is used to integrate the safety controller into an EtherCAT-based automation...
-
Pilz Magnetic safety switch, 3NO, 5-pin, M8 maleVendor: PilzSKU: 506228This magnetic safety switch from Pilz uses a magnetic sensor principle to detect the position of a matching actuator, such as the PSEN ma1.3-08, and provides 3NO safety contacts for use in guard monitoring circuits. It operates from a 24 V DC supply and...
-
Pilz Safety relay, single/dual channel, 1 aux contact, 24VDCVendor: PilzSKU: 774340This safety relay is designed for single or dual channel operation and provides one auxiliary contact, operating from a 24VDC supply. It monitors safety circuits and switches outputs accordingly, with screw terminal connections for straightforward panel wiring. The unit is housed in ABS UL...
-
Pilz Contact block, screw terminal, 1NCVendor: PilzSKU: 400320This contact block is a screw-terminal accessory with one normally closed (1NC) contact, using an AgNi contact material and rated for a minimum contact current of 1 mA. It is designed for connection to control and signalling devices such as E-stops, in line with...
-
Pilz PSSu Electronic module, 2 outputs, 8A, N/OVendor: PilzSKU: 312225This electronic module forms part of the Pilz PSSu automation system and provides two normally-open safety outputs for failsafe applications. It switches loads up to 8 A at 250 V AC1 or 8 A at 24 V DC1, allowing it to control safety-related actuators...
-
PILZ PNOZmulti Classic, Expansion module, failsafe, single-pole, 2AVendor: PilzSKU: 773500This expansion module forms part of the Pilz PNOZmulti Classic system, providing single-pole, failsafe outputs rated at 2 A for extending the number of safety-related outputs available in a configurable safety system. It features four semiconductor outputs with potential isolation, and a separate 24...
-
PRIMEVendor: PilzSKU: PRIME 312631PRIME is a safety automation platform from Pilz used to implement safety functions within machine and plant control systems. It provides a basis for configuring and managing safety-related control tasks in industrial applications. Typical use is within panels and systems where machine safety functions...
-
Pilz PNOZsigma safety relay, standalone, 2NO, 24VDCVendor: PilzSKU: 751101This Pilz PNOZsigma safety relay is a standalone module with 2 normally open safety contacts, operating from a 24 V DC supply and drawing 2 W. It provides one input and one semiconductor output, with safety contacts rated for 3 A at 240 V...
-
Pilz Connection cable, PUR, yellow RAL1003, 5-pin, M12Vendor: PilzSKU: 630349This Pilz product is a connection cable. It connects via 5-pin M12 female connector.Key specifications Rated current: 4 A Connection: 5-pin M12 female connector Diameter: 5.1mm Colour: Black / Yellow
-
Pilz Set of plug-in screw terminals for PNOZ m B1Vendor: PilzSKU: 750016This is a set of plug-in screw terminals for use with the Pilz PNOZ m B1 base module, part of the PNOZ m safety automation system. The terminals provide a plug-in wiring interface, allowing connections to the module to be made or removed without...
-
Pilz PNOZ mml2p, Plug-in screw terminals, 1 setVendor: PilzSKU: 793540This item is a set of plug-in screw terminals for use with Pilz PNOZ safety relays and modules, allowing wiring to be prepared separately from the device and connected or disconnected without disturbing fixed cabling. Plug-in terminals of this type are typically used in...
-
Pilz Magnetic safety switch, 2NO, male, M8, 4-pole, 24VDCVendor: PilzSKU: 525120This magnetic safety switch from Pilz is designed for monitoring the position of guards and safety doors on industrial machinery. It features a 2NO contact configuration and connects via an M8, 4-pin male connector, operating on a 24 V DC supply. The housing is...
-
Pilz Interface bus connectorVendor: PilzSKU: 311058This connector links interface modules to the bus system within a Pilz control or safety arrangement, allowing signal and data connections to be established without individual wiring of each channel. It is used in automation panels where Pilz interface modules are mounted together on...
-
Pilz Set of spring-loaded terminalsVendor: PilzSKU: 311061PSS SB SPING TERM DI8O8 The PSS SB SPING TERM DI8O8 is a spring-loaded terminal module with 8 digital inputs and 8 digital outputs for connection to the PSS 4000 system. It is used to connect digital sensors and actuators.
-
Pilz Safetybus I/O Block, 2 dual poleVendor: PilzSKU: 301140The PSS SB DI8O8 is a digital I/O module for the SafetyBUS p decentralised periphery system from Pilz. It has 8 digital inputs and 8 digital outputs. The module can be used for standard automation tasks. Features: • 8 digital inputs • 8 digital...
-
Pilz Plug-in connector, 8-pin, straight, M12Vendor: PilzSKU: 540334This M12 connector provides an 8-pin male termination for connecting field devices to safety automation systems. The straight design suits panel and machine wiring where space and cable routing require a fixed connector orientation. Housed in gold-plated brass (Au/CuZn) with a black finish, it...
-
Pilz Plug-in connector, screw, 8-pin, straight, M12Vendor: PilzSKU: 540332This is an 8-pin M12 plug-in connector with a straight, screw-type, A-coded female connection, used to terminate field wiring to Pilz safety automation devices. The connector features gold-plated contacts and CuSn socket material, and accepts cable cross sections up to 0.75mm² (AWG 18). Rated...
-
Pilz Adapter for connecting the sensor, 3 conductors, 4AVendor: PilzSKU: 380323This Pilz product is an adapter for connecting the sensor. It is specified for -5 to 70 °C.Key specifications Rated current: 4 A Operating temperature: -5 to 70 °C
-
Pilz PSENopt, Y-cable with connector straight M12Vendor: PilzSKU: 630295This Y-cable from Pilz is fitted with a straight M12 connector and is used to link PSENopt safety light curtain components within a control circuit. It forms part of the PSENopt safety automation range, allowing connection of associated devices without additional junction hardware. The...
-
Pilz Actuator for magnetic safety switch, square, (H)13mmVendor: PilzSKU: 514110This actuator is designed for use with magnetic safety switches, providing the target element that triggers switching when brought into range of the sensor. Its square housing measures 36 x 26 x 13mm and is constructed with a PBT upper part, giving a compact,...
-
Pilz Interface for 4 PSEN 1, spring, 96x48x43.5Vendor: PilzSKU: 535120The Pilz PSEN is an interface for 4 1. It is specified for -10 to 55 °C.Key specificationsOperating temperature: -10 to 55 °C
-
Pilz RFiD Actuator for safety switch, codedVendor: PilzSKU: 540380This coded RFiD actuator is designed for use with compatible Pilz safety switches, forming part of a non-contact guard locking or interlocking arrangement. It works alongside the switch to signal the position of a movable guard, providing a coded identification method rather than a...
-
Pilz RFiD Safety switch, 5-pin M12 male connector, 24VDCVendor: PilzSKU: 540353This safety switch uses RFID technology to detect the position of a guard door and forms part of a machine safeguarding circuit. It connects via a 5-pin M12 male connector and operates on a 24VDC supply, allowing straightforward integration with standard safety control systems....
-
Pilz Safety relay, standalone, 7NO+2NC, 24VDCVendor: PilzSKU: 777609This standalone safety relay from Pilz operates on a 24 V DC supply and provides 7 normally open and 2 normally closed contacts, with 2 inputs and 2 semiconductor outputs. It is rated for a maximum current of 8 A under both AC1 and...
-
Pilz Plug-in screw terminal, fieldbus mod. on PNOZ mm0.xpVendor: PilzSKU: 793543This plug-in screw terminal is designed for fieldbus modules on PNOZ mm0.xp, offering a secure connection for safety systems. It supports up to 10 sets per module and conforms to RoHS and REACh standards, ensuring compliance in safety-critical environments.
-
Pilz PNOZmulti Classic, communication module, female 9-pinVendor: PilzSKU: 773730This communication module forms part of the Pilz PNOZmulti Classic configurable safety system, providing a fieldbus interface for connection to EtherNet/IP or Modbus/TCP networks as a slave device. It connects via RJ45 with galvanic isolation, supporting transmission rates of 10 or 100 MBit/s, and...
-
Pilz Safety relay, dual channel, automatic/manual reset, 24VDCVendor: PilzSKU: 474695This safety relay operates from a 24 V DC supply and provides two inputs with dual-channel monitoring, supporting both automatic and manual reset operation. Safety contacts are rated up to 8 A at 24 V DC or 240 V AC, with contacts made from...
-
Pilz PITestop, Contact block, 1 NO, screwVendor: PilzSKU: 400310This contact block provides a single normally open contact and connects via screw terminals. It is designed for use with the Pilz PITestop range, allowing signal contacts to be configured within safety-related control circuits. Typical applications include emergency stop and safety switch assemblies within...
-
Pilz Decentralised input module for PNOZmulti, 8 outputsVendor: PilzSKU: 773600This Pilz decentralised input module is designed for use within the PNOZmulti safety system, providing 8 inputs for standard and failsafe applications. It operates from a 24 V DC supply and is rated for ambient temperatures from -30 to 60 °C, suiting installation in...
