Pilz
-
Pilz Contact expansion module, 2NO, 24VDCVendor: PilzSKU: 750108This contact expansion module adds two normally open contacts to a Pilz safety relay or safety controller system, operating from a 24 V DC supply. It provides one input and one semiconductor output, with a maximum switching current of 3 A on both AC1...
-
Pilz Configurable safe small controller, fieldbus module, EtherCATVendor: PilzSKU: 772136This module is a fieldbus interface for Pilz's configurable safe small controller range, providing an EtherCAT slave connection. It operates on a 24 V supply with a power consumption of 0.9 W, and is used to integrate the safety controller into an EtherCAT-based automation...
-
Pilz Magnetic safety switch, 3NO, 5-pin, M8 maleVendor: PilzSKU: 506228This magnetic safety switch from Pilz uses a magnetic sensor principle to detect the position of a matching actuator, such as the PSEN ma1.3-08, and provides 3NO safety contacts for use in guard monitoring circuits. It operates from a 24 V DC supply and...
-
Pilz Safety relay, single/dual channel, 1 aux contact, 24VDCVendor: PilzSKU: 774340This safety relay is designed for single or dual channel operation and provides one auxiliary contact, operating from a 24VDC supply. It monitors safety circuits and switches outputs accordingly, with screw terminal connections for straightforward panel wiring. The unit is housed in ABS UL...
-
Pilz Contact block, screw terminal, 1NCVendor: PilzSKU: 400320This contact block is a screw-terminal accessory with one normally closed (1NC) contact, using an AgNi contact material and rated for a minimum contact current of 1 mA. It is designed for connection to control and signalling devices such as E-stops, in line with...
-
Pilz PSSu Electronic module, 2 outputs, 8A, N/OVendor: PilzSKU: 312225This electronic module forms part of the Pilz PSSu automation system and provides two normally-open safety outputs for failsafe applications. It switches loads up to 8 A at 250 V AC1 or 8 A at 24 V DC1, allowing it to control safety-related actuators...
-
PILZ PNOZmulti Classic, Expansion module, failsafe, single-pole, 2AVendor: PilzSKU: 773500This expansion module forms part of the Pilz PNOZmulti Classic system, providing single-pole, failsafe outputs rated at 2 A for extending the number of safety-related outputs available in a configurable safety system. It features four semiconductor outputs with potential isolation, and a separate 24...
-
PRIMEVendor: PilzSKU: PRIME 312631PRIME is a safety automation platform from Pilz used to implement safety functions within machine and plant control systems. It provides a basis for configuring and managing safety-related control tasks in industrial applications. Typical use is within panels and systems where machine safety functions...
-
Pilz PNOZsigma safety relay, standalone, 2NO, 24VDCVendor: PilzSKU: 751101This Pilz PNOZsigma safety relay is a standalone module with 2 normally open safety contacts, operating from a 24 V DC supply and drawing 2 W. It provides one input and one semiconductor output, with safety contacts rated for 3 A at 240 V...
-
Pilz Connection cable, PUR, yellow RAL1003, 5-pin, M12Vendor: PilzSKU: 630349This Pilz product is a connection cable. It connects via 5-pin M12 female connector.Key specifications Rated current: 4 A Connection: 5-pin M12 female connector Diameter: 5.1mm Colour: Black / Yellow
-
Pilz Set of plug-in screw terminals for PNOZ m B1Vendor: PilzSKU: 750016This is a set of plug-in screw terminals for use with the Pilz PNOZ m B1 base module, part of the PNOZ m safety automation system. The terminals provide a plug-in wiring interface, allowing connections to the module to be made or removed without...
-
Pilz PNOZ mml2p, Plug-in screw terminals, 1 setVendor: PilzSKU: 793540This item is a set of plug-in screw terminals for use with Pilz PNOZ safety relays and modules, allowing wiring to be prepared separately from the device and connected or disconnected without disturbing fixed cabling. Plug-in terminals of this type are typically used in...
-
Pilz Magnetic safety switch, 2NO, male, M8, 4-pole, 24VDCVendor: PilzSKU: 525120This magnetic safety switch from Pilz is designed for monitoring the position of guards and safety doors on industrial machinery. It features a 2NO contact configuration and connects via an M8, 4-pin male connector, operating on a 24 V DC supply. The housing is...
-
Pilz Interface bus connectorVendor: PilzSKU: 311058This connector links interface modules to the bus system within a Pilz control or safety arrangement, allowing signal and data connections to be established without individual wiring of each channel. It is used in automation panels where Pilz interface modules are mounted together on...
-
Pilz Set of spring-loaded terminalsVendor: PilzSKU: 311061PSS SB SPING TERM DI8O8 The PSS SB SPING TERM DI8O8 is a spring-loaded terminal module with 8 digital inputs and 8 digital outputs for connection to the PSS 4000 system. It is used to connect digital sensors and actuators.
-
Pilz Safetybus I/O Block, 2 dual poleVendor: PilzSKU: 301140The PSS SB DI8O8 is a digital I/O module for the SafetyBUS p decentralised periphery system from Pilz. It has 8 digital inputs and 8 digital outputs. The module can be used for standard automation tasks. Features: • 8 digital inputs • 8 digital...
-
Pilz Plug-in connector, 8-pin, straight, M12Vendor: PilzSKU: 540334This M12 connector provides an 8-pin male termination for connecting field devices to safety automation systems. The straight design suits panel and machine wiring where space and cable routing require a fixed connector orientation. Housed in gold-plated brass (Au/CuZn) with a black finish, it...
-
Pilz Plug-in connector, screw, 8-pin, straight, M12Vendor: PilzSKU: 540332This is an 8-pin M12 plug-in connector with a straight, screw-type, A-coded female connection, used to terminate field wiring to Pilz safety automation devices. The connector features gold-plated contacts and CuSn socket material, and accepts cable cross sections up to 0.75mm² (AWG 18). Rated...
-
Pilz Adapter for connecting the sensor, 3 conductors, 4AVendor: PilzSKU: 380323This Pilz product is an adapter for connecting the sensor. It is specified for -5 to 70 °C.Key specifications Rated current: 4 A Operating temperature: -5 to 70 °C
-
Pilz PSENopt, Y-cable with connector straight M12Vendor: PilzSKU: 630295This Y-cable from Pilz is fitted with a straight M12 connector and is used to link PSENopt safety light curtain components within a control circuit. It forms part of the PSENopt safety automation range, allowing connection of associated devices without additional junction hardware. The...
