Pilz
-
Pilz Configurable safe small controller, PNOZmulti 2 base unitVendor: PilzSKU: 772101This base unit forms part of the PNOZmulti 2 configurable safety controller system, used to implement safety functions within automation panels and machinery. It operates from a 24 V DC supply, drawing 18.5 W, and is housed in a polycarbonate enclosure sized 45 mm...
-
Pilz Safety light guard, 900mm, type 4, M12 5-pinVendor: PilzSKU: 632065This Pilz safety light guard is a type 4 optoelectronic protective device measuring 900mm, fitted with an M12 5-pin connector for wiring into safety circuits. It operates over a range of 0.2 to 18 metres and is designed to detect personnel presence at hazardous...
-
Pilz PSEN op cable axial Connection cable, PUR, M12, 5-pole, yellow, 5mVendor: PilzSKU: 630311This connection cable links PSEN safety sensors and switches to control systems using an M12, 5-pin female connector with an axial orientation. The PUR housing suits use in industrial environments, and the cable carries a current rating of 4 A. It is finished in...
-
Pilz PNOZmulti Chip card, 1 piece, 8 kBVendor: PilzSKU: 779201This chip card is used with the PNOZmulti configurable safety system to store the safety circuit configuration created for the base unit. It has a memory capacity of 8 kB and is supplied as a single unit. The card allows the safety programme to...
-
Pilz PNOZsigma Safety relay, 2-channel wiring, 1NO+1NCVendor: PilzSKU: 750106The PNOZsigma safety relay from Pilz provides 2-channel wiring with 1NO+1NC contact configuration for monitoring safety circuits in machinery and plant applications. It operates from a 24 V DC supply, drawing 3.5 W, and switches loads rated to 6 A under the DC-12 utilisation...
-
Pilz Connection cable, PUR, Yellow RAL1003, shielded, 8-pinVendor: PilzSKU: 630315This is an 8-pin M12 connection cable with a PUR/TPU jacket in yellow (RAL 1003), terminated with an 8-pin M12 female connector, and rated at 2 A. The shielded PUR construction suits use in industrial environments where flexible, oil-resistant cabling is required for automation...
-
Pilz Actuator for coded safety switch, 18x37x18mm(WHD)Vendor: PilzSKU: 541080This actuator is designed for use with coded safety switches, providing the mating component required for non-contact position monitoring on guards and access doors. Housed in PBT, it is compact in size, measuring 18x37x18mm (WHD), suitable for installation on machine guards and panels where...
-
Pilz PNOZ X3 Safety relay, standalone, 3NO+1NC, 24VAC/DCVendor: PilzSKU: 774310The PNOZ X3 is a standalone safety relay providing 3 normally open and 1 normally closed contact configuration, designed for 24 V AC/DC supply. It is housed in ABS UL 94 V0 material with screw terminal connections, suitable for mounting within industrial control panels....
-
Pilz Safety relay, Standalone, plug-in, screw, 3NO+1NC, 24VDC, 2.5WVendor: PilzSKU: 777355Two-hand control relay to EN 574, Type IIIC, for two-hand control devices on presses and punches in the metalworking industry. Monitors synchronous operation and provides protection against bypass. Suitable for applications up to PL e of EN ISO 13849-1 and SIL CL 3 of...
-
Pilz PNOZsigma Safety relay, 1-channel wiring, 3NO+1NCVendor: PilzSKU: 750102The Pilz PNOZsigma is a single-channel wired safety relay with 3 normally open and 1 normally closed contact configuration, designed for monitoring safety circuits in industrial machinery. It operates from a 24 V DC supply, drawing 2 W, and switches loads rated to 6...
-
Pilz PNOZsigma Contact expansion, plug-in screw, 4NO+1NCVendor: PilzSKU: 750107This PNOZsigma contact expansion module is equipped with 4 NO and 1 NC outputs for contact block expansion in safety-related systems. Operating on 24V DC, it provides reliable support for extended safety functions when combined with safety control components.
-
Pilz PSEN cable axial Connection cable, PUR, M12, 8-pole, 30mVendor: PilzSKU: 540326This connection cable links safety sensors and switches fitted with an 8-pin M12 connector to Pilz safety control equipment, using an axial connector configuration. It has a PUR outer sheath, a length of 30 metres, and a diameter of 6.1mm, with a current rating...
-
Pilz Connection cable, PUR, yellow, 4-pin, M12, 10mVendor: PilzSKU: 630302This connection cable features a 4-pin M12 female connector and a PUR outer sheath, supplied in a length of 10 metres with a cable diameter of 5.1mm. It is rated for a current of 4 A and finished in yellow (RAL 1003) for visual...
-
Pilz PSEN opII4H-s-30-120 Safety light guard, protection field 1200mmVendor: PilzSKU: 632067The PSEN opII4H-s-30-120 is a safety light curtain with a protection field of 1200mm, used to safeguard access to hazardous areas on automated machinery and plant. It has a housing constructed from aluminium, PC and zinc, giving it a compact cross-section of 35mm width...
-
Pilz Configurable safe small controller, PNOZmulti 2Vendor: PilzSKU: 772120The PNOZmulti 2 is a configurable safe small controller used for failsafe automation tasks within industrial safety systems. It operates from a 24 V DC supply with low power consumption, and is rated for ambient temperatures between 0 and 60 °C, making it suitable...
-
Pilz PNOZsigma Safety relay, 1/2-channel wiring, 3NO+1NCVendor: PilzSKU: 750104This safety relay from the PNOZsigma range provides 1/2-channel wiring with 3 normally open and 1 normally closed contacts, operating from a 24 V DC supply with a power consumption of 2.5 W. It offers two inputs and one semiconductor output, with a maximum...
-
Pilz Pnoz s Terminator plugVendor: PilzSKU: 750010The Pnoz s Terminator plug is an accessory for use with Pilz Pnoz s series safety relays. It terminates unused connections on the device, allowing correct configuration within a safety circuit. It is typically used on control panels where Pnoz s modules are installed...
-
Pilz Safety relay, 1/2-channel wiring, 2NO, 24VAC/DCVendor: PilzSKU: 774607This safety relay operates with a 1/2-channel wiring configuration and provides 2 normally open contacts, supplied at 24 V AC/DC. It accepts two inputs and switches safety-related loads with a maximum current of 6 A on both AC1 and DC1 duty. The device is...
-
Pilz Safety light guard, type 2, 1050mm protected field, 24VDCVendor: PilzSKU: 630726This PSEN safety light guard from Pilz is a Type 2 hand protection device with a 30mm resolution and a protected field height of 1050 mm. It operates on 24 V and provides reliable safety for industrial applications, offering robust protection against accidental hand...
-
Pilz Expansion module, failsafe, dual-pole, 24V, 2WVendor: PilzSKU: 773812This expansion module is a failsafe, dual-pole device operating from a 24 V DC supply with a power consumption of 2 W. It provides two analogue inputs supporting both current and voltage signal types, allowing safety controllers to be extended with additional analogue monitoring...
