Pilz
-
Pilz Actuator for magnetic safety switch, square, (H)13mmVendor: PilzSKU: 514110This actuator is designed for use with magnetic safety switches, providing the target element that triggers switching when brought into range of the sensor. Its square housing measures 36 x 26 x 13mm and is constructed with a PBT upper part, giving a compact,...
-
Pilz Interface for 4 PSEN 1, spring, 96x48x43.5Vendor: PilzSKU: 535120The Pilz PSEN is an interface for 4 1. It is specified for -10 to 55 °C.Key specificationsOperating temperature: -10 to 55 °C
-
Pilz RFiD Actuator for safety switch, codedVendor: PilzSKU: 540380This coded RFiD actuator is designed for use with compatible Pilz safety switches, forming part of a non-contact guard locking or interlocking arrangement. It works alongside the switch to signal the position of a movable guard, providing a coded identification method rather than a...
-
Pilz RFiD Safety switch, 5-pin M12 male connector, 24VDCVendor: PilzSKU: 540353This safety switch uses RFID technology to detect the position of a guard door and forms part of a machine safeguarding circuit. It connects via a 5-pin M12 male connector and operates on a 24VDC supply, allowing straightforward integration with standard safety control systems....
-
Pilz Safety relay, standalone, 7NO+2NC, 24VDCVendor: PilzSKU: 777609This standalone safety relay from Pilz operates on a 24 V DC supply and provides 7 normally open and 2 normally closed contacts, with 2 inputs and 2 semiconductor outputs. It is rated for a maximum current of 8 A under both AC1 and...
-
Pilz Plug-in screw terminal, fieldbus mod. on PNOZ mm0.xpVendor: PilzSKU: 793543This plug-in screw terminal is designed for fieldbus modules on PNOZ mm0.xp, offering a secure connection for safety systems. It supports up to 10 sets per module and conforms to RoHS and REACh standards, ensuring compliance in safety-critical environments.
-
Pilz PNOZmulti Classic, communication module, female 9-pinVendor: PilzSKU: 773730This communication module forms part of the Pilz PNOZmulti Classic configurable safety system, providing a fieldbus interface for connection to EtherNet/IP or Modbus/TCP networks as a slave device. It connects via RJ45 with galvanic isolation, supporting transmission rates of 10 or 100 MBit/s, and...
-
Pilz Safety relay, dual channel, automatic/manual reset, 24VDCVendor: PilzSKU: 474695This safety relay operates from a 24 V DC supply and provides two inputs with dual-channel monitoring, supporting both automatic and manual reset operation. Safety contacts are rated up to 8 A at 24 V DC or 240 V AC, with contacts made from...
-
Pilz PITestop, Contact block, 1 NO, screwVendor: PilzSKU: 400310This contact block provides a single normally open contact and connects via screw terminals. It is designed for use with the Pilz PITestop range, allowing signal contacts to be configured within safety-related control circuits. Typical applications include emergency stop and safety switch assemblies within...
-
Pilz Decentralised input module for PNOZmulti, 8 outputsVendor: PilzSKU: 773600This Pilz decentralised input module is designed for use within the PNOZmulti safety system, providing 8 inputs for standard and failsafe applications. It operates from a 24 V DC supply and is rated for ambient temperatures from -30 to 60 °C, suiting installation in...
-
Pilz Connection cable, PUR, yellow, straight M12, A-coded, 4-pin, 5mVendor: PilzSKU: 630301This 5-meter connection cable features a 4-pin M12 straight socket and is designed with a yellow PUR insulation for visibility and durability. The cable is resistant to oil and flame, making it suitable for use in demanding industrial applications.
-
Pilz Actuator for coded safety switch, transponder, codedVendor: PilzSKU: 540080The actuator is intended for use with coded safety switches PSENcode 1.x/2.x, offering a transponder coding mechanism with a low coding level per ISO 14119. It is built to withstand challenging environments with an operating temperature range of -25 to 70 °C.
-
Pilz PNOZsigma Contact expansion, 8NO, 1NC, 24 VDCVendor: PilzSKU: 751111The PNOZ s11 C contact expansion module provides 8 normally open and 1 normally closed contacts, designed for expanding contacts in safety-related control systems. It features plug-in spring-loaded terminals and operates at 24 V DC, ensuring reliable and flexible safety operation.
-
Pilz PSEN op4H-s-30-045/1 Safety light curtain, type 4, 4-pole, 8-pinVendor: PilzSKU: 630762This safety light curtain, Type 4, is designed for hand protection with a 30 mm resolution and a protected field height of 450 mm. It operates with a 24 V supply and is equipped with 4-pin and 8-pin M12 connectors for the transmitter and...
-
Pilz Configurable safe controllers, PNOZmulti mini base unitVendor: PilzSKU: 772000This compact base unit for configurable safe controllers features 20 safe digital inputs and 4 safe semiconductor outputs. Although discontinued, it remains a robust solution for safety-critical applications with limited expansion requirements.
-
Pilz Safety relay, standalone, 2NO, 24VAC/DC, screwVendor: PilzSKU: 774325This safety relay is suitable for monitoring E-STOP and safety gates, featuring 2 N/O outputs. It supports 1/2-channel wiring without detection of shorts across contacts, operating on 24 V AC/DC.
-
Pilz PSEN cs3.1p 1switch RFID Safety switch, M8 male, 8-pinVendor: PilzSKU: 541060This RFiD safety switch offers 2 safe SC outputs and features an 8-pin M8 male connector, with one actuation direction and a switching distance of 11 mm. It is suitable for series connection, with an IP67 rating for secure operation in demanding environments.
-
Pilz RFiD Actuator for safety switch, 40x11x40mm(WHD)Vendor: PilzSKU: 540383The RFiD actuator is designed for the PSEN cs1.19 safety switch, featuring IP67 protection and OSSD1 functionality. With a compact and durable design, it ensures reliable operation in demanding environments, providing an essential component for safety-critical systems.
-
Pilz Safety relay, automatic/manual start, 3NO+1NCVendor: PilzSKU: 774790This safety relay features 3 N/O, 1 N/C, and 1 N/O timed delay contact, with a delay time adjustable between 0.05 and 30 seconds. It operates on 24 V DC and is suitable for E-STOP monitoring and safety gate applications.
-
Pilz PSEN OP2H-S-30-120/1 Safety light guard, type 2, M12, 24VVendor: PilzSKU: 630727This Type 2 safety light guard offers hand protection with a 30 mm resolution and a protected field height of 1200 mm. It includes 4-pin and 5-pin M12 connectors for the transmitter and receiver, operating within a range of 0.2 to 19 meters, making...
