Safety Automation
-
Pilz Safety light guard, type 2, 1050mm protected field, 24VDCVendor: PilzSKU: 630726This PSEN safety light guard from Pilz is a Type 2 hand protection device with a 30mm resolution and a protected field height of 1050 mm. It operates on 24 V and provides reliable safety for industrial applications, offering robust protection against accidental hand...
-
Pilz Expansion module, failsafe, dual-pole, 24V, 2WVendor: PilzSKU: 773812This expansion module is a failsafe, dual-pole device operating from a 24 V DC supply with a power consumption of 2 W. It provides two analogue inputs supporting both current and voltage signal types, allowing safety controllers to be extended with additional analogue monitoring...
-
Pilz Contact expansion module, 2NO, 24VDCVendor: PilzSKU: 750108This contact expansion module adds two normally open contacts to a Pilz safety relay or safety controller system, operating from a 24 V DC supply. It provides one input and one semiconductor output, with a maximum switching current of 3 A on both AC1...
-
Euchner MSC-CB-AC-FI8FO4S Safety relay, 8 single-channelVendor: EuchnerSKU: 166057The Euchner MSC-CB-AC-FI8FO4S is a modular safety relay unit providing 8 single-channel safety inputs, 2 safety semiconductor outputs (OSSD) and 4 programmable monitoring outputs, all p-switching and short-circuit-proof according to EN 61131-2. It operates from a 24 V DC PELV supply and mounts on...
-
Pilz Configurable safe small controller, fieldbus module, EtherCATVendor: PilzSKU: 772136This module is a fieldbus interface for Pilz's configurable safe small controller range, providing an EtherCAT slave connection. It operates on a 24 V supply with a power consumption of 0.9 W, and is used to integrate the safety controller into an EtherCAT-based automation...
-
Euchner TZ1LE024M-C1684 Safety switch, escape release + pushbuttonVendor: EuchnerSKU: 083170This TZ1LE024M-C1684 safety switch with escape release and pushbutton is designed for industrial safety applications. It features two LED displays, an auxiliary release on the front, and an escape release on the rear. The housing is made of anodized die-cast alloy, and the switch...
-
Pilz Safety relay, single/dual channel, 1 aux contact, 24VDCVendor: PilzSKU: 774340This safety relay is designed for single or dual channel operation and provides one auxiliary contact, operating from a 24VDC supply. It monitors safety circuits and switches outputs accordingly, with screw terminal connections for straightforward panel wiring. The unit is housed in ABS UL...
-
Euchner N01R550SVM5-M Single limit switch, roller plunger, M12Vendor: EuchnerSKU: 88622This limit switch uses a roller plunger actuator and is fitted with an M12 connector for cable connection. The housing is constructed from anodised die-cast aluminium alloy with gold-flashed contacts, and the unit operates within a temperature range of -5 to 80°C, requiring an...
-
Pilz Contact block, screw terminal, 1NCVendor: PilzSKU: 400320This contact block is a screw-terminal accessory with one normally closed (1NC) contact, using an AgNi contact material and rated for a minimum contact current of 1 mA. It is designed for connection to control and signalling devices such as E-stops, in line with...
-
Pilz PSSu Electronic module, 2 outputs, 8A, N/OVendor: PilzSKU: 312225This electronic module forms part of the Pilz PSSu automation system and provides two normally-open safety outputs for failsafe applications. It switches loads up to 8 A at 250 V AC1 or 8 A at 24 V DC1, allowing it to control safety-related actuators...
-
PILZ PNOZmulti Classic, Expansion module, failsafe, single-pole, 2AVendor: PilzSKU: 773500This expansion module forms part of the Pilz PNOZmulti Classic system, providing single-pole, failsafe outputs rated at 2 A for extending the number of safety-related outputs available in a configurable safety system. It features four semiconductor outputs with potential isolation, and a separate 24...
-
Schneider Soft starter for asynchronous motor, 3 - 15kW, 14.8AVendor: Schneider ElectricSKU: ATS48D17QThis soft starter is designed to control the starting and stopping of three-phase asynchronous motors rated between 3 and 15kW, with a current rating of 14.8A. It operates from a supply voltage of 230 to 415V and includes an RS485 multidrop interface for communication...
-
PRIMEVendor: PilzSKU: PRIME 312631PRIME is a safety automation platform from Pilz used to implement safety functions within machine and plant control systems. It provides a basis for configuring and managing safety-related control tasks in industrial applications. Typical use is within panels and systems where machine safety functions...
-
Pilz Connection cable, PUR, yellow RAL1003, 5-pin, M12Vendor: PilzSKU: 630349This Pilz product is a connection cable. It connects via 5-pin M12 female connector.Key specifications Rated current: 4 A Connection: 5-pin M12 female connector Diameter: 5.1mm Colour: Black / Yellow
-
Pilz Set of plug-in screw terminals for PNOZ m B1Vendor: PilzSKU: 750016This is a set of plug-in screw terminals for use with the Pilz PNOZ m B1 base module, part of the PNOZ m safety automation system. The terminals provide a plug-in wiring interface, allowing connections to the module to be made or removed without...
-
Murr M12, male 0° / female 0°, A-code, 3-pole, 0.5mVendor: MurrelektronikSKU: 7700-40021-1500050Product OverviewThis straight (0°) A‑coded M12 male to M12 female connector assembly, identified as SKU 7700‑40021‑1500050, features a short, highly flexible TPE cable designed for compact industrial wiring applications. Ideal for tightly packed systems, it offers robust handling of signal transmission with improved visibility...
-
Pilz PNOZ mml2p, Plug-in screw terminals, 1 setVendor: PilzSKU: 793540This item is a set of plug-in screw terminals for use with Pilz PNOZ safety relays and modules, allowing wiring to be prepared separately from the device and connected or disconnected without disturbing fixed cabling. Plug-in terminals of this type are typically used in...
-
Schneider Inductive proximity sensor, fixed, 3-wire, 10mmVendor: Schneider ElectricSKU: XS1N18PA349DThis inductive proximity sensor is a fixed, 3-wire device with a 10mm sensing range, designed to detect the presence of metallic targets without physical contact. It is typically used in industrial automation applications for position sensing and object detection on machinery and production equipment....
-
Schneider Mechanical and electrical interlockVendor: Schneider ElectricSKU: LA9D11502This interlock prevents two contactors from closing simultaneously, providing both mechanical and electrical interlocking between the two devices. It is fitted between paired contactors to protect against phase-to-phase short circuits in reversing or changeover applications. Typical use is in motor control panels where two...
-
Schneider Limit switch body, snap action, 1NC + 1NOVendor: Schneider ElectricSKU: ZCKS1H29This limit switch body provides snap action switching with one normally closed and one normally open contact. It forms part of a limit switch assembly used to detect the position or presence of machine components, triggering a control signal when actuated. Typical applications include...
