Safety Automation
-
Pilz Actuator for coded safety switch, 18x37x18mm(WHD)Vendor: PilzSKU: 541080This actuator is designed for use with coded safety switches, providing the mating component required for non-contact position monitoring on guards and access doors. Housed in PBT, it is compact in size, measuring 18x37x18mm (WHD), suitable for installation on machine guards and panels where...
-
Pilz PNOZ X3 Safety relay, standalone, 3NO+1NC, 24VAC/DCVendor: PilzSKU: 774310The PNOZ X3 is a standalone safety relay providing 3 normally open and 1 normally closed contact configuration, designed for 24 V AC/DC supply. It is housed in ABS UL 94 V0 material with screw terminal connections, suitable for mounting within industrial control panels....
-
Pilz PNOZsigma Safety relay, 2-channel wiring, 1NO+1NCVendor: PilzSKU: 750106The PNOZsigma safety relay from Pilz provides 2-channel wiring with 1NO+1NC contact configuration for monitoring safety circuits in machinery and plant applications. It operates from a 24 V DC supply, drawing 3.5 W, and switches loads rated to 6 A under the DC-12 utilisation...
-
Euchner MGBS-H-BA1A10-R Handle module, short, 117mmVendor: EuchnerSKU: 166532This handle module forms part of the Euchner MGB system, providing a door handle for access points on safety-guarded machinery. The housing is constructed from fibre glass reinforced plastic, nickel-plated die-cast zinc and stainless steel, giving an IP65 rating suitable for industrial environments. At...
-
Pilz Safety light guard, 900mm, type 4, M12 5-pinVendor: PilzSKU: 632065This Pilz safety light guard is a type 4 optoelectronic protective device measuring 900mm, fitted with an M12 5-pin connector for wiring into safety circuits. It operates over a range of 0.2 to 18 metres and is designed to detect personnel presence at hazardous...
-
Pilz PSEN op cable axial Connection cable, PUR, M12, 5-pole, yellow, 5mVendor: PilzSKU: 630311This connection cable links PSEN safety sensors and switches to control systems using an M12, 5-pin female connector with an axial orientation. The PUR housing suits use in industrial environments, and the cable carries a current rating of 4 A. It is finished in...
-
Pilz PNOZmulti Chip card, 1 piece, 8 kBVendor: PilzSKU: 779201This chip card is used with the PNOZmulti configurable safety system to store the safety circuit configuration created for the base unit. It has a memory capacity of 8 kB and is supplied as a single unit. The card allows the safety programme to...
-
Pilz PNOZsigma Safety relay, 1-channel wiring, 3NO+1NCVendor: PilzSKU: 750102The Pilz PNOZsigma is a single-channel wired safety relay with 3 normally open and 1 normally closed contact configuration, designed for monitoring safety circuits in industrial machinery. It operates from a 24 V DC supply, drawing 2 W, and switches loads rated to 6...
-
Euchner RPS-M-3131SC300SFM5 Rope pull switch, pull-to-resetVendor: EuchnerSKU: 119844The RPS-M-3131SC300SFM5 is a rope pull switch with a pull-to-reset mechanism, housed in die-cast aluminium and fitted with an M12 plug connector for wiring. It is designed for use in emergency stop applications along conveyors or machine lines, where a pulled rope actuates the...
-
Euchner TZ1LE024MVAB Safety switch, aux release on frontVendor: EuchnerSKU: 083965The TZ1LE024MVAB is a solenoid-interlocked safety switch from the Euchner TZ1 series, featuring an auxiliary release on the front and a die-cast alloy housing with silver alloy, gold-flashed contacts. It operates at a solenoid voltage of 24 V AC/DC and switches loads within the...
-
Euchner EKS-A-K1RDWT32-EU Electronic-key read/write, redVendor: EuchnerSKU: 077859This is an electronic key from Euchner's EKS-A series, used for read/write identification and access control functions within safety automation systems. The key features an ABS housing and carries an IP65/IP67 rating, allowing use in environments with exposure to dust and moisture. Its compact...
-
Pilz PNOZsigma Contact expansion, plug-in screw, 4NO+1NCVendor: PilzSKU: 750107This PNOZsigma contact expansion module is equipped with 4 NO and 1 NC outputs for contact block expansion in safety-related systems. Operating on 24V DC, it provides reliable support for extended safety functions when combined with safety control components.
-
Pilz PSEN cable axial Connection cable, PUR, M12, 8-pole, 30mVendor: PilzSKU: 540326This connection cable links safety sensors and switches fitted with an 8-pin M12 connector to Pilz safety control equipment, using an axial connector configuration. It has a PUR outer sheath, a length of 30 metres, and a diameter of 6.1mm, with a current rating...
-
Pilz Connection cable, PUR, yellow, 4-pin, M12, 10mVendor: PilzSKU: 630302This connection cable features a 4-pin M12 female connector and a PUR outer sheath, supplied in a length of 10 metres with a cable diameter of 5.1mm. It is rated for a current of 4 A and finished in yellow (RAL 1003) for visual...
-
Pilz PSEN opII4H-s-30-120 Safety light guard, protection field 1200mmVendor: PilzSKU: 632067The PSEN opII4H-s-30-120 is a safety light curtain with a protection field of 1200mm, used to safeguard access to hazardous areas on automated machinery and plant. It has a housing constructed from aluminium, PC and zinc, giving it a compact cross-section of 35mm width...
-
Pilz Configurable safe small controller, PNOZmulti 2Vendor: PilzSKU: 772120The PNOZmulti 2 is a configurable safe small controller used for failsafe automation tasks within industrial safety systems. It operates from a 24 V DC supply with low power consumption, and is rated for ambient temperatures between 0 and 60 °C, making it suitable...
-
Euchner SN02D12-502-M Limit Switch, 1NC + 1NO, 12mmVendor: EuchnerSKU: 082165This limit switch provides one normally closed and one normally open contact in a 12 mm housing format. It is used to detect the position or presence of moving machine parts, feeding signals into control or safety circuitry. Typical applications include machine guarding and...
-
Euchner A-C40-113869 Actuator, 600N, 2 x M5x16 screws includedVendor: EuchnerSKU: 113869\nDescription\n\n\nActuator\nThe anchor plate for the CEM actuator has spring mountings and can be tilted to an angle of +/-4°.\n\nTherefore, when a misadjusted safety door is closed, the CEM actuator automatically adjusts itself to the surface of the solenoid. Subsequent adjustment of the safety door...
-
Pilz PNOZsigma Safety relay, 1/2-channel wiring, 3NO+1NCVendor: PilzSKU: 750104This safety relay from the PNOZsigma range provides 1/2-channel wiring with 3 normally open and 1 normally closed contacts, operating from a 24 V DC supply with a power consumption of 2.5 W. It offers two inputs and one semiconductor output, with a maximum...
-
Euchner SN04R12-502-M Multiple limit switch, 1NC + 1NO, 12mm spacingVendor: EuchnerSKU: 082161This SN04R12-502-M limit switch is equipped with a roller plunger for precise actuation. It features a snap-action switching contact with 1 NC and 1 NO configuration, housed in an upright die-cast aluminum housing. It offers IP67 protection and is ideal for use in industrial...
