Balluf - Focus
-
Balluff BNS 819-99-D-11 Mechanical single position switchVendor: BalluffSKU: BNS003ZThis is a mechanical position switch with a single switching point, housed in anodised aluminium with silver contacts. It is rated IP67 for use in environments where dust and moisture ingress must be resisted, and connects via screw terminals at a rated voltage of...
-
Balluff BNS 819-99-R-11 Mechanical single position switchVendor: BalluffSKU: BNS004UThis limit switch is a mechanical single position device with an anodized aluminium housing, suited to detecting position or end-of-travel in industrial machinery and panel-mounted equipment. It connects via screw terminals and can be installed in any orientation, with an IP67 rating allowing use...
-
Balluff BNS 819-B02-D08-40-10 Mechanical limit switchVendor: BalluffSKU: BNS01NLThis is a mechanical limit switch with an aluminium housing and silver contacts, rated IP67 for protection against dust and water ingress. The switch position uses a solder connection and it is rated for 250 VAC operation. It is suitable for position sensing tasks...
-
Balluff BNS 819-B02-D12-61-12-10 Mechanical limit switchVendor: BalluffSKU: BNS026RThe BNS 819-B02-D12-61-12-10 is a mechanical limit switch with an anodised aluminium housing and gold-plated silver contacts, rated IP67 for use in harsh industrial environments. It is designed for position sensing in machinery and automated equipment, connecting via screw terminals and switching loads up...
-
Balluff BNS 819-B03-D08-40-11 Mechanical multiple position limit switchVendor: BalluffSKU: BNS01RPThis is a mechanical multiple position limit switch with an anodised aluminium housing, designed for vertical installation. Electrical connection is made via screw terminals across switch positions 1 to 3, and the unit carries an IP67 rating for use in environments where dust and...
-
Balluff BNS 819-D02-L12-100-10 Multiple position switchVendor: BalluffSKU: BNS00C3This is a mechanically actuated limit switch with an anodized aluminium housing, intended for vertical installation on machinery and panels where multiple switch positions are required. Electrical connection is made via screw terminals, and the unit carries an IP67 rating for use in environments...
-
Balluff BNS 819-D02-R12-62-10 Mechanical multiple position switchVendor: BalluffSKU: BNS01HLThis mechanical multiple position switch is used to provide direct position feedback in automation systems, mounting vertically with a screw terminal connection at the switch position. The housing is constructed from anodized aluminium and rated IP67, suiting installation in industrial environments with an ambient...
-
Balluff BNS 819-D03-D12-62-10 Multiple position switchVendor: BalluffSKU: BNS01HUThis is a mechanical multiple position switch with an anodised aluminium housing, intended for vertical installation on machinery or plant equipment. Electrical connection is made via screw terminals at switch positions 1 to 3, allowing straightforward wiring within a control panel or machine enclosure....
-
Balluff BNS 819-D03-R12-100-10 Mechanical multiple limit switchVendor: BalluffSKU: BNS00EWThis mechanical multiple limit switch uses gold-plated and silver contacts within an anodized aluminium housing, rated IP67 for use in harsh industrial environments. It is designed to detect the position of moving machine parts and feed that status into control circuits, complying with IEC...
-
Balluff BNS 819-D04-D12-100-10-FD Mechanical limit switchVendor: BalluffSKU: BNS00FLThis Balluff BNS 819-D04-D12-100-10-FD is a mechanical limit switch housed in an anodized aluminium enclosure, intended for vertical installation. It provides up to four switch positions wired via screw terminals, allowing detection of mechanical actuation in machinery and panel applications. With an IP67 rating...
-
Balluff BNS 819-D04-R12-100-10 Mechanical multiple position limit switchVendor: BalluffSKU: BNS00J4This is a mechanical multiple position limit switch with an anodized aluminium housing and gold-plated silver contacts, rated IP67 for protection against dust and water ingress. It is designed for direct actuation via a mechanical operator, with screw terminal connections for up to four...
-
Balluff BNS 819-D04-R12-100-10-FD Mechanical limit switchVendor: BalluffSKU: BNS00J5This mechanical limit switch is designed for position sensing in industrial machinery and automation equipment, providing a physical actuation point that signals a control system when reached. Its aluminium housing and IP67 rating suit installation in environments where dust and moisture ingress must be...
-
Balluff BNS 819-D08-D12-100-10 Multiple limit switch, 12mmVendor: BalluffSKU: BNS00M0This mechanical cam switch is designed for precision control in industrial automation, offering up to 8 switch positions. It features an IP67 protection rating, making it suitable for harsh environments. The switch is compliant with IEC 60947-5-1 standards and supports a rated operating voltage...
-
Balluff BNS 819-D08-D12-100-10-FD Mechanical multiple limit switchVendor: BalluffSKU: BNS00M1This mechanical multiple limit switch features an anodised aluminium housing with gold-plated and silver contacts, and connections made via screw terminal across positions 1-8. Rated IP67, it is suited to demanding industrial environments where protection against dust and moisture ingress is required. The unit...
-
Balluff BNS 819-FK-60-101-S4R Mechanical single position limit switchVendor: BalluffSKU: BNS000YThis is a mechanical single position limit switch with an anodised aluminium housing, suitable for installation in any orientation. It connects via a connector and carries an IP67 rating, allowing use in environments where dust and moisture ingress must be resisted. The specified ambient...
-
Balluff BNS 819-FR-60-101 Mechanical single position limit switchVendor: BalluffSKU: BNS0013This mechanical single position limit switch uses a gold-plated and silver contact arrangement with screw terminal connection, housed in anodised aluminium for use in demanding industrial environments. It is rated IP67, suiting applications where dust and moisture ingress must be resisted, and carries a...
-
Balluff BOD 21M-LA02-S92 Photoelectric distance sensorVendor: BalluffSKU: BOD000MThe BOD 21M-LA02-S92 is a photoelectric distance sensor from Balluff's Field Sensing & Connectivity range, housed in a die-cast aluminium and zinc body measuring 42.5mm x 50mm x 15mm. It operates at 24 VDC with a rated current of 100 mA and connects via...
-
Balluff BOD 21M-LBI05-S4 Photoelectric distance sensorVendor: BalluffSKU: BOD002LThe BOD 21M-LBI05-S4 is a photoelectric distance sensor from Balluff's Field Sensing & Connectivity range, designed for measuring distance in industrial automation applications. It features an IP67-rated housing constructed from aluminium, glass, PMMA and zinc die casting, making it suitable for demanding panel and...
-
Balluff BOD 23K-LA01-S92 Photoelectric distance sensorVendor: BalluffSKU: BOD001NThe BOD 23K-LA01-S92 is a photoelectric distance sensor from Balluff designed to measure distances between 100 and 5000 mm. It features an ABS housing with dimensions of 51 x 23 x 52.4 mm and connects via an M12x1-Male, 5-pin connector, operating on 18...30 VDC....
-
Balluff BOD 23K-LB01-S92 Photoelectric distance sensorVendor: BalluffSKU: BOD001PThis photoelectric sensor is designed for distance measurement, providing high precision with a long-range detection capability. It features a compact housing, making it ideal for applications where space is limited, and offers reliable performance in industrial environments.
-
Balluff BOD 23K-LI01-S4 Photoelectric distance sensorVendor: BalluffSKU: BOD0020The BOD 23K-LI01-S4 is a photoelectric distance sensor with an M12x1, 4-pin male connector for panel and machine wiring. It offers PNP/NPN auto-detect switching with NO/NC configuration and communicates via IO-Link 1.1, allowing integration into automation networks that support this interface. Its ABS housing...
-
Balluff BOD 24K-LPI07-S4 Photoelectric distance sensorVendor: BalluffSKU: BOD002MThe BOD 24K-LPI07-S4 is a photoelectric distance sensor from Balluff's Field Sensing & Connectivity range, housed in plastic with a glass sensing surface and rated to IP67 for use in demanding industrial environments. It provides two PNP/NPN NO/NC push-pull switching outputs alongside an IO-Link...
-
Balluff BOD 24K-LPI08-S4 Photoelectric distance sensorVendor: BalluffSKU: BOD002NThis photoelectric distance sensor measures object distance up to a rated operating distance of 650 mm, adjustable to suit the application, and provides two PNP/NPN NO/NC push-pull switching outputs alongside an IO-Link 1.1 interface for parameter setting and diagnostics. Housed in plastic with a...
-
Balluff BOD 37M-LB01-S92 Photoelectric distance sensorVendor: BalluffSKU: BOD001WEasy operation, fast installation, affordable price – the highlights of our photoelectric global sensors. The broad spectrum of diff use sensors, retroreflective light sensors and throughbeam sensors in various housing designs has a wide variety of applications. BOD 23K-LB01-S92 is a Photoelectric distance sensors...
-
Balluff BOD 37M-LPR02-S115 Photoelectric distance sensorVendor: BalluffSKU: BOD001YThis is a photoelectric distance sensor from Balluff's BOD range, using light reflection to measure distance to a target over a range of 200 to 20000 mm. It is housed in a die-cast zinc enclosure and connects via an 8-pin M12x1 male connector, operating...
-
Balluff BOD 66M-LB14-S92 Photoelectric distance sensorVendor: BalluffSKU: BOD001FEasy operation, fast installation, affordable price – the highlights of our photoelectric global sensors. The broad spectrum of diff use sensors, retroreflective light sensors and throughbeam sensors in various housing designs has a wide variety of applications. BOD 66M-LB14-S92 is a Photoelectric distance sensors...
-
Balluff BOD 6K-RA03-S75 Photoelectric distance sensor, PNPVendor: BalluffSKU: BOD001RThis photoelectric distance sensor uses a PNP output to detect object presence over a measuring range of 30 to 200 mm. Housed in an ABS enclosure with an M8x1 male 4-pin connector, it is designed for compact mounting within panels and machine assemblies. It...
-
Balluff BOS 08E-PS-PR20-S49 Retroreflective sensor, PNP, NOVendor: BalluffSKU: BOS01RKThe BOS 08E-PS-PR20-S49 is a retroreflective photoelectric sensor with a PNP normally open output, designed to detect objects via a reflector at a rated operating distance of 1 m. Its housing is stainless steel with a PMMA sensing surface, and it carries an IP67...
-
Balluff BOS 12M-PA-LE10-S4 Through-beam sensor, PNP, NO/NCVendor: BalluffSKU: BOS00WFThis through-beam sensor forms the emitter half of a photoelectric pair, detecting objects that interrupt the beam over a range of up to 30 metres. It provides a PNP output configurable as NO or NC, operates on 10...30 VDC, and connects via an M12x1...
-
Balluff BOS 12M-PA-RE10-S4 Through-beam sensor, PNP, NO/NCVendor: BalluffSKU: BOS024UThis through-beam photoelectric sensor operates as a receiver unit, providing PNP output with selectable NO/NC switching. Housed in nickel-plated brass with a Ø12 x 60 mm cylindrical body, it is suited to panel and machine installations requiring a compact, durable sensing element. It detects...
-
Balluff BOS 12M-PO-ID10-S4 Diffuse sensor, PNP, NC, Ø 12 x 60mmVendor: BalluffSKU: BOS01ZJThis diffuse photoelectric sensor is designed for object detection with a range of up to 400 mm. It operates with PNP normally closed (NC) output, offers short-circuit protection, and features a rugged IP67-rated housing suitable for harsh environments.
-
Balluff BOS 12M-PS-PR10-S4 Retroreflective sensor, PNP, NOVendor: BalluffSKU: BOS01TTThe BOS 12M-PS-PR10-S4 is a retroreflective photoelectric sensor with a PNP normally open output, operating at a rated distance of 3000mm and detecting via a reflector target. Its housing is brass with a nickel-plated finish and a PMMA sensing surface, rated IP67 for use...
-
Balluff BOS 12M-PS-RE10-S4 Through-beam sensor, PNP, NOVendor: BalluffSKU: BOS01TYThis through-beam photoelectric sensor with a cylindrical housing provides precise object detection over a range of up to 8 meters. It is equipped with a potentiometer for sensitivity adjustment and has IP67 protection for demanding environments.
-
Balluff BOS 12M-X-RS10-S4 Through-beam sensor, 0 - 8m rangeVendor: BalluffSKU: BOS01TWThis is a through-beam photoelectric sensor with a rated operating distance of up to 8000mm, designed for detecting objects across a fixed gap between separate emitter and receiver units. The housing is a nickel-plated brass M12 barrel with a PMMA sensing surface, IP67 rated...
-
Balluff BOS 12M-XT-LS11-S4 Through-beam sensor, Ø 12 x 70Vendor: BalluffSKU: BOS00WLThis through-beam sensor forms part of a photoelectric pair, with the emitter and receiver mounted opposite one another so that an object is detected when it interrupts the beam. The BOS 12M-XT-LS11-S4 has a cylindrical Ø 12 x 70 mm housing in nickel-plated brass...
-
Balluff BOS 18E-PA-RD20-S4 Diffuse sensor, PNP, NO/NCVendor: BalluffSKU: BOS01KEThis photoelectric sensor features a stainless steel housing and operates on the principle of diffuse detection with light/dark switching capabilities. It is equipped with IP68/IP67 protection, making it ideal for use in environments with exposure to water and dust.
-
Balluff BOS 18E-X-RS20-S4 Through-beam sensor, Ø 18 x 75mmVendor: BalluffSKU: BOS01KTThe BOS 18E-X-RS20-S4 is a through-beam sensor housed in a stainless steel body with a glass sensing surface, in a Ø18 x 75mm format for nut mounting (M18x1). It operates from 10 to 30 VDC, connects via an M12x1 four-pin male connector, and offers...
-
Balluff BOS 18KF-NA-1PD-C-02 Diffuse sensor, NPN, NO/NCVendor: BalluffSKU: BOS00J1This diffuse photoelectric sensor detects objects by reflecting light directly off the target surface, without requiring a reflector, over a sensing range of 0 to 400 mm. It operates on 10 to 30 VDC with an NPN output configurable as normally open or normally...
-
Balluff BOS 18KF-PA-1N1R-S4-C Diffuse sensor PNP, NO/NCVendor: BalluffSKU: BOS00JWDiffuse sensors with background suppression ensure reliable detection regardless of the surface, colour and material. Their scanning behavior is virtually constant, even with different reflectance levels. \n
-
Balluff BOS 18KF-PA-1PD-S4-C Diffuse sensor PNP, NO/NCVendor: BalluffSKU: BOS00JZEnergetic diffuse sensors are ideal for the detection of differences in contrast. They detect objects depending on their surface, colour and material. They are inexpensive, easy to mount and align.
-
Balluff BOS 18KF-PA-1PE-S4-C Energetic diffuse sensorVendor: BalluffSKU: BOS00K1Energetic diffuse sensors are ideal for the detection of differences in contrast. They detect objects depending on their surface, colour and material. They are inexpensive, easy to mount and align.
-
Balluff BOS 18KF-PA-1QD-S4-C Retroreflective sensorVendor: BalluffSKU: BOS00K3Balluff’s retroreflective sensor is especially easy to align thanks to generous mounting tolerances. You only need to mount one electrical device plus a reflector. Large reflectors guarantee high ranges. The light barriers detect objects regardless of their surface, colour and material. A pole filter...
-
Balluff BOS 18KF-PA-1RE-S4-C Retroreflective sensorVendor: BalluffSKU: BOS00K5This Balluff sensor provides precise object detection with a diffuse sensor mechanism. It is designed for use in automation systems and features an IP67 protection rating, ensuring durability in industrial environments.
-
Balluff BOS 18KW-PA-1TB-S4-C Retroreflective sensor, PNP, NO/NCVendor: BalluffSKU: BOS00LZThis retroreflective photoelectric sensor is designed for detecting objects at distances of up to 1.7 meters. It features an LED light source and offers adjustable sensitivity via a potentiometer. The sensor is IP67 rated, ensuring durability in industrial environments. It operates at a voltage...
-
Balluff BOS 18M-PA-LH23-S4 Diffuse sensor with b/ground suppr.Vendor: BalluffSKU: BOS01C5The BOS 18M-PA-LH23-S4 is a diffuse photoelectric sensor with background suppression, housed in a brass, nickel-plated M18 body with a PMMA sensing surface and IP67 protection. It offers an adjustable operating distance of up to 150 mm and provides PNP normally open and normally...
-
Balluff BOS 18M-PA-RE21-S4 Through-beam sensor, PNP, NO/NCVendor: BalluffSKU: BOS025AThis through-beam photoelectric sensor is ideal for detecting objects over distances of up to 20 meters. It features light-on/dark-on switching functions and includes short-circuit protection, ensuring reliable operation in industrial environments with an IP67 rating for durability.
-
Balluff BOS 18M-PI-RE30-S4 Through-beam sensor, PNPVendor: BalluffSKU: BOS01UCThe Balluff BOS 18M-PI-RE30-S4 is a through-beam sensor. It connects via M12x1 / Male / 4-pin and operates from 18 - 30 VDC. The housing is rated IP67. Approvals: CE, UKCA, cULus, WEEE.Key specifications IP rating: IP67 Operating voltage: 18 - 30 VDC Rated...
-
Balluff BOS 18M-PS-IR23-S4 Retroreflective sensor, PNP, NOVendor: BalluffSKU: BOS01HKThis retroreflective photoelectric sensor is designed for detecting objects up to 6 meters away. It features LED indicators for power and light reception, as well as short-circuit and polarity reversal protection. With IP67 protection and a robust brass housing, it is ideal for industrial...
-
Balluff BOS 18M-PS-RH22-S4 Diffuse sensor with b/ground suppressionVendor: BalluffSKU: BOS019PThis photoelectric sensor is ideal for object detection with background suppression. It features an adjustable sensing range of 30 to 300 mm, PNP normally open (NO) output, and provides reliable detection in industrial automation environments.
-
Balluff BOS 18M-PUV-RD30-S4 Diffuse sensor, PNP, NOVendor: BalluffSKU: BOS01J8This is a diffuse reflective sensor in an 18 mm brass housing with a nickel-plated grip and glass sensing surface, rated IP67 for use in demanding industrial environments. It detects objects at a rated operating distance of up to 500 mm, which is adjustable,...
