Euchner
-
Euchner RPS-I-3-4/100M Tensioning rope for pull switches, 100mVendor: EuchnerSKU: 092814Tensioning rope for rope pull switches. The rope with 100 m length.
-
Euchner RPS-M-3131SC175M Rope pull switch, M20x1.5, 2NC+2NOVendor: EuchnerSKU: 114983Rope pull switches RPS are emergency stop devices for protecting large, expansive machine or installation areas that cannot be protected by an enclosing housing or cover. Areas of an installation or machine can be shut down immediately from any point in the working area...
-
Euchner RPS-M-3131SC300SFM5 Rope pull switch, pull-to-resetVendor: EuchnerSKU: 119844The RPS-M-3131SC300SFM5 is a rope pull switch with a pull-to-reset mechanism, housed in die-cast aluminium and fitted with an M12 plug connector for wiring. It is designed for use in emergency stop applications along conveyors or machine lines, where a pulled rope actuates the...
-
Euchner RPS-O-8-50/V5 Eyebolt for rope pull switches w/thread, M8Vendor: EuchnerSKU: 092495Eyebolt for rope pull switches. Eyebolt has a thread M8 and works cohesively as RPS series accessories.
-
Euchner RPS-PS/V5 Pulley set for rope pull switchesVendor: EuchnerSKU: 092501Pulley set RPS-PS/V5 for rope pull switches. Pulley set consisting of rope pulley block and pulley support.
-
Euchner RPS-RS/V5 Rope set for rope pull switchesVendor: EuchnerSKU: 092496Rope set consisting of thimble and rope clamp
-
Euchner RPS-W-100/175 Tensioner spring for tensile forceVendor: EuchnerSKU: 092136Tensioner spring for rope pull switches. Tensioner spring for tensile force 110N / 175N.
-
Euchner RPS2131PR100M Rope pull switch, pull-to-reset buttonVendor: EuchnerSKU: 094849This rope pull switch is designed for emergency stop applications along conveyors and other extended machinery lines, allowing operators to trigger a stop from any point along the pull cord. The pull-to-reset button function requires deliberate manual reset of the switch before the machine...
-
Euchner RPS2131PR300M Rope pull switch, pull-to-reset buttonVendor: EuchnerSKU: 094851Plastic housing Emergency stop device with detent mechanism as per EN ISO 13850 and EN 60947-5-5 Rope clamp for pull wire Indication of correct rope tension 3 cable entries M20 x 1.5 Switching elements with 4 switching contacts Blue reset button
-
Euchner RPS3131SC175M Rope pull switch, clamping headVendor: EuchnerSKU: 088883This rope pull switch is fitted with a clamping head for connection to a pull-wire rope in emergency stop and safety applications along conveyors or extended machine lines. It provides a means of initiating a safety stop function when the rope is pulled or...
-
Euchner Safety switch STP with door monitoring contactVendor: EuchnerSKU: 091494The STP is a solenoid-operated safety switch with guard locking, combining door position monitoring with locking status feedback in a single device. It operates on the open-circuit current principle, applying voltage to the guard locking solenoid to lock and releasing by spring force, with...
-
Euchner Safety switch w/o door monitoring contactVendor: EuchnerSKU: 091746This Euchner STP1 safety switch operates on the closed-circuit current principle, with guard locking maintained by spring force and released by applying voltage to the guard locking solenoid. It provides slow-action switching with 2 NC and 2 NO contacts, plus guard lock monitoring via...
-
Euchner Safety switch, plug connector SR11, door monitoring contactVendor: EuchnerSKU: 088204This safety switch TP3-4141A024SEM4AS1 is designed for industrial applications where secure locking is required. It features an auxiliary release on the front and supports increased horizontal overtravel. The switch operates on the closed-circuit current principle, providing reliable performance with IP67 protection.
-
Euchner SB03R08-552-M Multiple limit switch, 8mmVendor: EuchnerSKU: 086541The Euchner SB03R08-552-M is a multiple limit switch fitted with three snap-action switching elements, each providing a changeover contact, on an 8mm plunger spacing with a slide bearing actuating element. It is housed in an anodised die-cast aluminium enclosure rated IP67, suitable for installation...
-
Euchner Screw holder with cable hook for enabling switchesVendor: EuchnerSKU: 047820Euchner's Holding bracket for E100 enabling switch The holder with an additional cable hook for hanging a wound-up cable. It can be securely fastened to parts of the machine with a wall thickness of max. 15 mm using two screws.
-
Euchner SN01D558SVM5-M Single limit switch, chisel plunger, M12Vendor: EuchnerSKU: 088625This precision limit switch features a chisel plunger made of stainless steel. It operates with a snap-action switching contact, offering both NC and NO contact options. It is housed in anodized die-cast alloy and provides IP67 protection.
-
Euchner SN02D08-552-M Multiple limit switch, 8mmVendor: EuchnerSKU: 085902The Euchner SN02D08-552-M is a multiple limit switch fitted with two ES 552 snap-action switching elements, each providing one changeover contact, operated by a chisel plunger with 8 mm plunger spacing. The housing is die-cast aluminium with anodised finish, rated IP67, and contacts are...
-
Euchner SN02D12-502-M Limit Switch, 1NC + 1NO, 12mmVendor: EuchnerSKU: 082165This limit switch provides one normally closed and one normally open contact in a 12 mm housing format. It is used to detect the position or presence of moving machine parts, feeding signals into control or safety circuitry. Typical applications include machine guarding and...
-
Euchner SN02R08-552-M Multiple limit switch, 8mmVendor: EuchnerSKU: 085906The Euchner SN02R08-552-M is a multiple limit switch fitted with two snap-action switching elements, each providing a changeover contact, and a roller plunger actuator with 8 mm plunger spacing. It is rated for AC 15 (2 A, 230 V) and DC 13 (2 A,...
-
Euchner SN02R12-502-M Multiple limit switch, 1NC+1NOVendor: EuchnerSKU: 079287This mechanical position switch with a 12mm plunger spacing is ideal for industrial environments where precise actuation and reliable switching are required. The switch features a snap-action switching contact and a small flange upright housing, providing versatile application options.
-
Euchner SN04D12-502-M Limit switch, 1NC + 1NO, 12mmVendor: EuchnerSKU: 082162This SN04D12-502-M mechanical limit switch is designed for applications requiring high accuracy and durability. It features a chisel plunger and a snap-action switching contact with 1 NC and 1 NO configuration. The housing is made of anodized die-cast aluminum, and the device offers IP67...
-
Euchner SN04R12-502-M Multiple limit switch, 1NC + 1NO, 12mm spacingVendor: EuchnerSKU: 082161This SN04R12-502-M limit switch is equipped with a roller plunger for precise actuation. It features a snap-action switching contact with 1 NC and 1 NO configuration, housed in an upright die-cast aluminum housing. It offers IP67 protection and is ideal for use in industrial...
-
Euchner SN04R12-508-M Multiple limit switch, 12mmVendor: EuchnerSKU: 090461This multi-position switch has a robust design with 4 switching elements, each offering positively driven contacts. It features an upright housing and is ideal for precise position detection in demanding industrial environments.
-
Euchner SN05D12-502-M Limit switch, 12mm plunger spacingVendor: EuchnerSKU: 082159This Euchner limit switch uses a plunger with 12mm spacing to detect position or movement of machine components. It is designed for integration into safety automation circuits, providing a signal used to monitor guard doors, covers or moving parts within industrial equipment. Typical use...
-
Euchner SN05R12-502-M Multiple limit switch, 1NC + 1NOVendor: EuchnerSKU: 082158This SN05R12-502-M mechanical limit switch is ideal for high-precision industrial applications. It features a snap-action switching contact with 1 NC and 1 NO configuration and an upright housing with a small flange. The plunger spacing is 12 mm, and it offers IP67 protection, making...
-
Euchner SR11EF Plug connector for safety switches NZ and TZVendor: EuchnerSKU: 070859The SR11EF is a plug connector for use with Euchner NZ and TZ safety switches, terminating field wiring via crimp connections with screw locking for a secure mechanical fit. It offers 11 pins plus PE, a rated current of 5000 mA at up to...
-
Euchner STA3A-4121A024M Safety switch, door monitoring contactVendor: EuchnerSKU: 096936This safety switch STA with door monitoring contact features a 24 V AC/DC solenoid operation, with guard locking by spring force. It includes auxiliary release and is designed for vertical or horizontal installation. The switch provides IP67 protection and is ideal for monitoring guard...
-
Euchner STA4A-4141A024SEM4AS1 Safety switch, plug conn. M12Vendor: EuchnerSKU: 105305The STA4A-4141A024SEM4AS1 is a safety switch with guard locking from Euchner's STA4 series, fitted with an M12 plug connector for ASi-3 interface connection. It monitors both the guard position and the locking state, using red and green LED indicators to signal status, and includes...
-
Euchner STM1A-222B024-MC2160 Safety switch, 1 LED, greenVendor: EuchnerSKU: 098856This Euchner STM1A-222B024-MC2160 is a solenoid interlock safety switch fitted with a single green LED indicator, used to monitor and secure guards or access doors on industrial machinery. The housing is constructed from silver alloy and gold-flashed, reinforced thermoplastic, with an IP67 rating suiting...
-
Euchner STP3A-2131A024M Safety switch, door monitoring contactVendor: EuchnerSKU: 091493The Euchner STP3A-2131A024M Safety Switch is a high-quality safety device designed for reliable door monitoring in industrial automation systems. Engineered to enhance safety and ensure secure operation, this switch provides robust performance for monitoring access points and maintaining operational safety across various applications. Key...
-
Euchner STP3A-441A024M Safety switch, door monitoring contact, 8WVendor: EuchnerSKU: 099272The STP3A-441A024M is a safety switch with guard locking, operating on the closed-circuit current principle, where locking is achieved by spring force and release occurs when voltage is applied to the guard locking solenoid. It provides door monitoring via a slow-action switching contact configuration...
-
Euchner TP1-538A024M-C1855, Safety SwitchVendor: EuchnerSKU: 084154This safety switch is designed for interlocking guard doors and access points on industrial machinery, preventing operation unless the guard is correctly closed. It is typically installed on machine guards and safety fencing where controlled access must be monitored as part of a wider...
-
Euchner TP3-4121K024M Safety switch, door monitoring contactVendor: EuchnerSKU: 084260This safety switch is designed for door monitoring applications on industrial machinery and guarding systems. It detects the position of a guard door and provides a contact signal used within a safety circuit to prevent hazardous machine operation while the door is open. Typical...
-
Euchner TP3-4131A024M Safety switch with door monitoring contactVendor: EuchnerSKU: 084129This safety switch offers a robust solution for industrial safety applications, featuring a long housing with three cable entries and slow-action switching contacts. It is equipped with two positively driven contacts and one NO contact, providing reliable performance in environments where both horizontal and...
-
Euchner TP3-4141A024M Safety switch TP, door monit. contactVendor: EuchnerSKU: 084270This safety switch features a robust design with slow-action switching contacts, making it suitable for demanding industrial environments. It includes an auxiliary release and is designed for applications requiring reliable guard locking and monitoring. The switch offers IP67 protection and can be used in...
-
Euchner TP3-4141K024M Safety switch, door monitoring contactVendor: EuchnerSKU: 100684The Euchner TP3-4141K024M is a guard locking safety switch with slow-action switching contacts, used for door monitoring and interlocking on machine guards. It provides two door position and two guard lock monitoring positively driven contacts, with locking based on the closed-circuit current principle and...
-
Euchner TP3-537A024M Safety switch, door monitoring contactVendor: EuchnerSKU: 084336This safety switch is used for monitoring guard doors and access points on machinery, providing a contact signal that indicates whether the door is open or closed. It forms part of a safety circuit that prevents machine operation unless the guard is correctly closed....
-
Euchner TP4-4121A024M Safety switch, door monitoring contactVendor: EuchnerSKU: 084139This safety switch is designed for door monitoring on machinery guarding applications, detecting whether a guard or access door is open or closed. It forms part of a safety interlock circuit, providing a signal used to prevent hazardous machine operation while the guard is...
-
Euchner TP4-4131A024M Safety switch with door monitoring contactVendor: EuchnerSKU: 084132Auxiliary release on the front With door monitoring contact Increased horizontal overtravel
-
Euchner Transponder codingVendor: EuchnerSKU: 067190This transponder coding technology is used in Euchner safety switches to identify actuators uniquely, preventing defeat by standard actuators from other switches. It is applied where non-contact coded interlocking is required on guards and safety doors within machine safety circuits. The coding level selected...
-
Euchner Trip dog, steel, 10mm lengthVendor: EuchnerSKU: 013372This trip dog is a steel actuating component measuring 10mm in length, used in conjunction with Euchner safety switches and interlocking devices. It mounts on guards or moving parts of machinery to engage the switch mechanism as the guard opens or closes. Trip dogs...
-
Euchner Trip dog, steel, 4mm lengthVendor: EuchnerSKU: 013395This trip dog is a steel actuating component used with Euchner safety switches to trigger the switching action as a guarded door or panel moves into position. It is fitted to the moving part of the guard, engaging the switch head at the point...
-
Euchner TZ1LE024M-C1684 Safety switch, escape release + pushbuttonVendor: EuchnerSKU: 083170This TZ1LE024M-C1684 safety switch with escape release and pushbutton is designed for industrial safety applications. It features two LED displays, an auxiliary release on the front, and an escape release on the rear. The housing is made of anodized die-cast alloy, and the switch...
-
Euchner TZ1LE024MVAB Safety switch, aux release on frontVendor: EuchnerSKU: 083965The TZ1LE024MVAB is a solenoid-interlocked safety switch from the Euchner TZ1 series, featuring an auxiliary release on the front and a die-cast alloy housing with silver alloy, gold-flashed contacts. It operates at a solenoid voltage of 24 V AC/DC and switches loads within the...
-
Euchner TZ1RE024PGVABL12C-MF Safety switchVendor: EuchnerSKU: 078159This is a solenoid-interlock safety switch from Euchner's TZ range, designed to prevent access to hazardous machine areas until motion has ceased. It combines guard locking with position monitoring, so the switch confirms the guard is closed and locked before permitting the associated machine...
-
Euchner TZ2LE024M Safety switch, 24VAC/DC, 1NC + 1NOVendor: EuchnerSKU: 090559The TZ2LE024M is a solenoid-interlock safety switch operating on the open-circuit current principle, with guard locking applied by energising the solenoid at 24 VAC/DC and release by spring force. It provides one NC and one NO slow-action switching contact, monitoring both door/actuator position and...
-
Euchner TZ2LE024RC18VAB-C1826 Safety switch, RC18Vendor: EuchnerSKU: 085180The TZ2LE024RC18VAB-C1826 is a safety switch operating on the open-circuit current principle, with guard locking achieved by applying voltage to the solenoid and release via spring force. It monitors both door/actuator position and guard locking status through a built-in solenoid, and is rated to...
-
Euchner TZ2RE024MVAB Safety switch, 250V, 10WVendor: EuchnerSKU: 088071This is a solenoid-interlock safety switch used to guard access to hazardous areas of machinery, holding a guard door closed until the machine has reached a safe condition. Rated at 250V with a 10W solenoid consumption, it is typically wired into a safety circuit...
-
Euchner ZSA2A4G05A Enabling switch, 3-stage function, 5m cableVendor: EuchnerSKU: 070764The Euchner ZSA2A4G05A is a three-stage enabling switch with a 5 m flying-lead cable terminated with cable end sleeves, used to permit hazardous machine movements only when deliberately held in the mid position by an operator. It provides 2 NO and 2 NC contacts,...
-
Euchner ZSA2A4G10A Housing G1, 3-stage, 2 buttons, 10m cableVendor: EuchnerSKU: 070765Euchner's ZS enabling switches are Ergonomic Design, Lightweight and work within a 3 position operation(clench or release operation). the enabling switches are equipped with variants with plus or minus buttons for machine jog. As well as 4-pole contact elements, the cable comes in the...
