WERMA Signal Towers
-
Werma Element, IO-link, black, 24VDC, 66 x 70mmVendor: WermaSKU: 646.840.55IO-Link element suitable for KombiSIGN 71 series Element with integrated IO-Link interface. Simplified control of the complete signal tower via an IO-Link master port. Suitable for the modular signal towers KombiSIGN 71 and KombiSIGN 72 in ClassicLOOK. Please order the required connection element separately.
-
Werma K37 Signal tower, 2 tiers, green/red, 24VAC/DCVendor: WermaSKU: 698.220.75Ready-configured signal tower with 2 optical levels (green/red) LED permanent light With M12 connector Also available in attractive metallic design and clear dome
-
Werma Twinlight design, green light, 24VAC/DC, 70 x 66mmVendor: WermaSKU: 647.230.75LED TwinLIGHT element suitable for KombiSIGN 72 The TwinLIGHT light element combines two light image functions (continuous and flashing light) in one element. Light colour green is generated via coloured LEDs. Suitable for the modular KombiSIGN 72 signal tower in DesignLOOK. Please order the...
-
Werma Siren element, 7 tone, black, 24VDCVendor: WermaSKU: 645.850.55Audible signal element that can be triggered externally 7 different tones adjustable Suitable for modular signal towers KombiSIGN 71 and KombiSIGN 72 in ClassicLOOK Order the required terminal element separately please
-
Werma LED Rotating light element, green, 24VAC/DC, 70 x 66mmVendor: WermaSKU: 644.230.75LED running light from the KombiSIGN series The chaser control of the LEDs increases the signalling effect. Intensive all-round effect with very low power consumption.
-
Werma LED Permanent light element, yellow, 115VAC, 70x66mmVendor: WermaSKU: 644.300.67LED permanent light element from the KombiSIGN 71 series The use of LEDs enables a service life of up to 50,000 hours. hours. Four LEDs produce a very bright point of light. Unambiguous signalling even in unfavourable lighting conditions.
-
Werma LED Blinking light element, yellow, 24VAC/DC, 70x66mmVendor: WermaSKU: 644.310.75LED indicator from the KombiSIGN 71 series The flashing signal can attract greater attention.
-
Werma Adapter for tube mounting, grey, 40 x 80mmVendor: WermaSKU: 630.730.00The right solution for every installation |
-
Werma K37cl Signal tower, M12 plug, green/yell/red, 24VAC/DCVendor: WermaSKU: 698.410.75Ready-configured signal tower with 3 optical levels (green/yellow/red) LED permanent light With M12 connector
-
Werma K37 Plug, green/yellow/red, 24VAC/DCVendor: WermaSKU: 698.210.75Ready-configured signal tower with 3 optical levels (green/yellow/red) LED permanent light With M12 connector Also available in attractive metallic design and clear dome
-
Werma Indication board, complete, white, 207 x 375mmVendor: WermaSKU: 960.630.09This indication board provides a mounting surface for signal or status indicators within a control panel or machine installation. Finished in white, it measures 207 x 375mm and is supplied complete and ready for fitting. It is typically used where visual status indication needs...
-
Werma Bracket for base mounting, grey, Ø 71mmVendor: WermaSKU: 960.000.54Cable gland is included in delivery.
-
Werma Terminal element for tube mounting, grey, 12-230VAC/DCVendor: WermaSKU: 640.910.00Suitable for the KombiSIGN 72 modular signal tower in DesignLOOK. Connection element for tube mounting (tube Ø 25 mm). Please order accessories separately.
-
Werma Terminal element for base mounting, grey, 12-230VAC/DCVendor: WermaSKU: 640.900.00Suitable for the KombiSIGN 72 modular signal tower in DesignLOOK. Connection element for floor mounting. Wall mounting possible with bracket (accessory). Please order accessories for wall mounting separately.
-
Werma Tube, black, Ø 25mm, (H) 46mmVendor: WermaSKU: 960.000.3145mm long aluminium tube with 25mm diameter.
-
Werma Fixing bracket, black, 80 x 50 x 149mmVendor: WermaSKU: 960.000.41This fixing bracket is used to mount Werma signalling devices, such as beacons or sounders, onto a panel, wall or machine surface. It is finished in black and measures 80 x 50 x 149mm, suiting installations where the signalling unit needs to be positioned...
-
Werma Twinlight design, blue light, 24VAC/DC, 70 x 66mmVendor: WermaSKU: 647.530.75LED TwinLIGHT element suitable for KombiSIGN 72 series The TwinLIGHT light element combines two light image functions (continuous and flashing light) in one element. Blue light is produced by coloured LEDs. Suitable for the modular signal tower KombiSIGN 72 in DesignLOOK. Please order the...
-
Werma Terminal element, black, 12 - 24VDCVendor: WermaSKU: 640.850.55This terminal element is used in Werma modular signal or control tower assemblies, providing the electrical connection point for a stack element within the 12-24VDC range. Finished in black, it is designed to be fitted as part of a modular signalling column on control...
-
Werma Permanent light element, yellow, 12 - 240VAC/DCVendor: WermaSKU: 641.300.00Permanent lighting element from the KombiSIGN 71 series Integrated B15d lampholder to accommodate the light source. The continuous light indicates a specific condition to the operator Lamp not included
-
Werma Permanent light element, green, 12 - 240VAC/DCVendor: WermaSKU: 641.200.00Permanent lighting element from the KombiSIGN 71 series Integrated B15d lampholder to accommodate the light source. The continuous light indicates a specific condition to the operator Lamp not included
-
Werma LED Flashing light element, red, 24VDC, 70 x 66mmVendor: WermaSKU: 644.110.75LED indicator from the KombiSIGN 71 series The flashing signal can attract greater attention.
-
Werma LED Blinking light element, blue, 24VAC/DC, 70 x 66mmVendor: WermaSKU: 644.510.75LED indicator from the KombiSIGN 71 series The flashing signal can attract greater attention.
-
Werma Multi-tone sounder, 8 tone, black, 230VACVendor: WermaSKU: 110.000.68High output installation multi-tone sounder for the 22.5 mm control panel/switchgear programme 8 different tones selectable Application-specific sound output setting
-
Werma Multi-tone sounder, 8 tone, black, 24VAC/DCVendor: WermaSKU: 110.000.75High output installation multi-tone sounder for the 22.5 mm control panel/switchgear programme 8 different tones selectable Application-specific sound output setting
-
Werma LED Rotating light element, red, 24VAC/DC, 70 x 66mmVendor: WermaSKU: 644.130.75LED running light from the KombiSIGN series The chaser control of the LEDs increases the signalling effect. Intensive all-round effect with very low power consumption.
-
Werma Base with integrated tube, grey, Ø 70mmVendor: WermaSKU: 960.000.51This base with integrated tube forms the mounting section for a modular signal tower, providing the connection point between the mounting surface and the stacked signal elements above. The housing and grip are made from PA-GF, with a diameter of 70mm and a height...
-
Werma Contact box for cable exit at side, black, Ø 70mmVendor: WermaSKU: 975.840.01This contact box provides a side cable exit for signal tower or beacon installations mounted on a Ø 70mm base. The housing and grip are constructed from PA-GF, with a black finish and a part height of 29mm. It is typically used where cable...
-
-
Werma Contact box with magnetic base, black, Ø 70mmVendor: WermaSKU: 975.840.04This contact box provides a mounting base for signal devices, secured in place by an integrated magnetic base rather than fixed drilling or bracketry. The housing and grip are constructed from PA-GF, with a black finish and a compact footprint of 70mm diameter. It...
-
Werma Base with integrated tube, silver, Ø 70mmVendor: WermaSKU: 960.698.03This base with integrated tube is designed for mounting signal tower or beacon components, providing a fixed connection point within a Ø70mm series. Constructed from polycarbonate, the unit has a silver housing finish and a part height of 82mm. It is typically used as...
-
Werma Terminal element, black, M12, 5-poleVendor: WermaSKU: 640.870.00Connecting element for KombiSIGN 71 and KombiSIGN 72 in ClassicLOOK. With practical M12 plug-in connection.
-
Werma Terminal element, M12, black, 8-pole, 70 x 59mmVendor: WermaSKU: 640.880.00Connecting element for KombiSIGN 71 and KombiSIGN 72 in ClassicLOOK. With practical M12 plug-in connection.
-
Werma LED Permanent light, ultrabright, green, 24VDC, 66 x 70mmVendor: WermaSKU: 644.280.55Extra bright LED permanent luminaire from the KombiSIGN series Up to 20 times brighter than conventional LED luminaires Extremely good visibility even in direct sunlight Intelligent control of LEDs always achieves maximum luminous intensity
-
Werma LED Permanent light, ultrabright, yellow, 24VDC, 66 x 70mmVendor: WermaSKU: 644.380.55Extra bright LED permanent luminaire from the KombiSIGN series Up to 20 times brighter than conventional LED luminaires Extremely good visibility even in direct sunlight Intelligent control of LEDs always achieves maximum luminous intensity
-
Werma LED Permanent light, ultrabright, red, 24VDC, 66 x 70mmVendor: WermaSKU: 644.180.55Extra bright LED permanent luminaire from the KombiSIGN series Up to 20 times brighter than conventional LED luminaires Extremely good visibility even in direct sunlight Intelligent control of LEDs always achieves maximum luminous intensity
-
Werma Mounting base with integrated tube, black, Ø 70mmVendor: WermaSKU: 960.000.64Mounting base with integrated tube in black. For mounting the eSIGN with protection class UL Type 4X. Identical drilling pattern and dimensions as the existing base with tube.
-
Werma Indication board, complete, white, 197 x 302mmVendor: WermaSKU: 960.630.08This indication board serves as a mounting accessory for signal indicators within control panel installations, providing a fixed white background panel measuring 197 x 302mm. It is used to hold and present visual signal or status devices in a clear, organised layout on machinery...
-
Werma Tube with clamp, black, (L) 39mmVendor: WermaSKU: 960.000.18This tube with clamp is a mounting accessory used with Werma signalling devices, providing a fixed connection point for stacking or extending components within a signal tower or beacon assembly. Finished in black with a length of 39mm, it is intended for use in...
-
Werma Connection element, grey, push-in, 40 x 44mmVendor: WermaSKU: 630.700.75The right solution for every installation |
-
Werma Adapter for single hole mount, grey, 40 x 46mmVendor: WermaSKU: 630.720.00The right solution for every installation |
-
Werma Adapter for base mounting, grey, 40 x 29mmVendor: WermaSKU: 630.710.00The right solution for every installation |
-
Werma Twinlight design signal tower, blue, 24VAC/DCVendor: WermaSKU: 634.530.75No more blind spots thanks to 360° radiation of the OmniView dome The right column for every application, thanks to DesignLOOK and ClassicLOOk Twin elements combine two light-image functions under one Article number TwinLIGHT combines LED continuous light and LED flashing light in one...
-
Werma Twinlight design signal tower, yellow, 24VAC/DCVendor: WermaSKU: 634.330.75No more blind spots thanks to 360° radiation of the OmniView dome The right column for every application, thanks to DesignLOOK and ClassicLOOk Twin elements combine two light-image functions under one Article number TwinLIGHT combines LED continuous light and LED flashing light in one...
-
Werma Twinlight design signal tower, green, 24VAC/DCVendor: WermaSKU: 634.230.75No more blind spots thanks to 360° radiation of the OmniView dome The right column for every application, thanks to DesignLOOK and ClassicLOOk Twin elements combine two light-image functions under one Article number TwinLIGHT combines LED continuous light and LED flashing light in one...
-
Werma Adapter for single hole mount, 27 x 83mmVendor: WermaSKU: 960.000.25This adapter enables single hole mounting of compatible Werma signalling components, with a part diameter of 27mm and a height of 83mm. Finished in silver, it is used where indicators or audible signal units need to be fitted to a control panel or enclosure...
-
Werma Permanent light element, red, 12 - 240VAC/DCVendor: WermaSKU: 641.100.00Permanent lighting element from the KombiSIGN 71 series Integrated B15d lampholder to accommodate the light source. The continuous light indicates a specific condition to the operator Lamp not included
-
Werma Permanent light element, clear, 12 - 240VAC/DCVendor: WermaSKU: 641.400.00Permanent lighting element from the KombiSIGN 71 series Integrated B15d lampholder to accommodate the light source. The continuous light indicates a specific condition to the operator Lamp not included
-
Werma Permanent light element, blue, 12 - 240VAC/DCVendor: WermaSKU: 641.500.00Permanent lighting element from the KombiSIGN 71 series Integrated B15d lampholder to accommodate the light source. The continuous light indicates a specific condition to the operator Lamp not included
-
Werma LED Blinking light element, green, 24VAC/DC, 70 x 66mmVendor: WermaSKU: 644.210.75LED indicator from the KombiSIGN 71 series The flashing signal can attract greater attention. attention.
-
Werma Bracket for base mounting, black, Ø 70mmVendor: WermaSKU: 960.000.14Werma's Bracket for base mount, BWM, is manufactured using PC/ABS, a durable thermoplastic blend known for its high impact resistance and heat resistance. The housing colour of the bracket is black, providing a sleek and professional appearance. The diameter of the bracket is 77...
