Euchner
-
Euchner CMS-R-BZB-03V Read heads design B for ESM, PVCVendor: EuchnerSKU: 097368The Euchner CMS-R-BZB-03V is a magnetic, reed-contact read head (design B) for use with ESM safety evaluation units, fitted with a 3 m PVC hard-wired cable terminated in cable end sleeves. It provides two NO contacts, each internally fused at 100 mA, with a...
-
Euchner CMS-R-BZB-SC Magnetic switch, read heads, design BVendor: EuchnerSKU: 100753The CMS-R-BZB-SC is a magnetic safety switch read head from Euchner, design B, operating on the reed contact principle with a matching magnetic actuator. It provides two NO contacts, each fused at 100 mA, and connects via a 4-pin M8 plug connector for use...
-
Euchner Connecting cable with plug connector M23, 10m, straightVendor: EuchnerSKU: 092898Euchner's connection cable with plug connector M23, 18 pin +PE. The plug connector is straight with a 10 m PUR cable length. The cores are also colour-coded.
-
Euchner Connecting cable with plug connector M23, 19-pin, 10mVendor: EuchnerSKU: 110304Euchner’s connection cable is connected with a M23 female plug, 19-pin. A straight plug connector. The cable comes in 10m and PUR cable, with cores numbered and is black in colour.
-
Euchner Connecting cable with plug connector M23, 3m, straightVendor: EuchnerSKU: 092816This connecting cable is fitted with an M23 plug connector and a straight cable outlet, supplied in a 3 metre length. It is used to link Euchner safety switching devices to control cabinets or junction boxes within a safety automation circuit. The pre-terminated design...
-
Euchner Connecting cable with plug connector M8, 3-pin, 10mVendor: EuchnerSKU: 084763Euchner's connection cable with plug connector female M8, 3-pin. The plug connector is straight with a 10 m PUR cable length.
-
Euchner Connecting cable with plug connector M8, 3-pin, 15mVendor: EuchnerSKU: 084764Euchner's connection cable with plug connector female M8, 3-pin. The plug connector is straight with a 15 m PUR cable length.
-
Euchner Connecting cable with plug connector M8, 3-pin, 5mVendor: EuchnerSKU: 084762Euchner's connection cable with plug connector M8, 18-pin +PE. The plug connector is straight with a 5 m PUR cable length.
-
Euchner Connecting cable with plug connector M8, 8-pin, 20mVendor: EuchnerSKU: 106673This Euchner connecting cable features an M8, 8-pin plug connector with a straight cable outlet, terminating in flying leads with cable end sleeves for connection into terminals. It is rated at 36 V and 1 A, with a PUR sheath and PP conductor insulation,...
-
Euchner Connecting cable with plug connector SR11, 5mVendor: EuchnerSKU: 077629The SR11 is a 5 m connecting cable terminating in an M26 x 1.5 female plug connector on one end and stripped flying leads on the other, providing 12 conductors (11+PE) with a 1 mm² cross section. It is rated at 50 V with...
-
Euchner Connecting cable with plug connector, M8, 3-pin, 10mVendor: EuchnerSKU: 077767This is a pre-made connecting cable fitted with an M8, 3-pin plug connector, supplied in a 10 metre length. It is used to link safety automation devices, such as switches or sensors, to control cabinets or junction boxes without the need for manual termination....
-
Euchner Connecting cable, M23, angled, 18-pin + PE, 15mVendor: EuchnerSKU: 077020This connecting cable terminates in an M23 connector with an angled cable outlet and 18 pins plus PE, with a flying lead termination at the opposite end, and is supplied in a 15 m length. It is rated at 150 V with conductors of...
-
Euchner Connecting cable, M23, straight, 18-pin + PE, 30mVendor: EuchnerSKU: 095993This actuator is part of a larger safety system and features a robust design made of stainless steel. It is suitable for both left and right doors and includes two stainless-steel safety screws for secure installation.
-
Euchner Contact insert module, female, 5-positions, spring-cageVendor: EuchnerSKU: 1647721This female contact insert module features five positions with spring-cage terminals, enabling reliable wire connections without the need for soldering or crimping tools. It forms part of a modular connector system used to build up multi-pole connections for machinery and control panel wiring. The...
-
Euchner CTP-AC-123653 Bolt for safety switches, series CTPVendor: EuchnerSKU: 123653This bolt is an accessory for the Euchner CTP series of safety switches, used to actuate the switch when mounted on a hinged safety guard door. It is designed for approach direction A or C and accommodates one safety switch per unit, suiting a...
-
Euchner CTP-L2-AP-M-HA-AZ-SA Transponder-coded safety switchVendor: EuchnerSKU: 124729The Euchner CTP-L2-AP-M-HA-AZ-SA is a transponder-coded safety switch with guard locking, operating on the open-circuit current principle whereby locking is actuated by power-ON and released by spring force. It is designed for mounting on movable guards on automated machinery, providing a locking force of...
-
Euchner EGM8 Precision single hole fixing limit switch, M8 x 0.5Vendor: EuchnerSKU: 119345The Euchner EGM8 is a single hole fixing limit switch with an M8 x 0.5 threaded body, designed for direct mounting into machine structures where space is limited. It features a rounded plunger actuating element and a changeover contact configuration, with a stainless steel...
-
Euchner EGT1/4A2000 Precision single hole fixing limit switchVendor: EuchnerSKU: 001366This precision limit switch is equipped with a reed contact and is designed for applications requiring high repeat accuracy and durability. It features a stainless steel plunger and is suitable for various industrial applications where precise actuation and reliable performance are essential.
-
Euchner EGT1/4A5000 Single hole fixing limit switch, 1NO, 5m cableVendor: EuchnerSKU: 001368The EGT1/4A5000 is a single-hole fixing limit switch from Euchner using a reed contact switching principle, fitted with a ball plunger (short) actuating element and a 5 m PUR two-core cable. It provides one normally open contact and mounts via an M14 x 1...
-
Euchner EGT1/4ASEM4 Single hole fixing limit switchVendor: EuchnerSKU: 033976This is a single hole fixing limit switch used to detect position or provide end-of-travel signalling within safety automation circuits. It mounts through a single hole, suiting applications where panel or machine space is limited. Typical use is on guarding and access points where...
-
Euchner EGT2SEM4 Single hole fixing limit switchVendor: EuchnerSKU: 052504The round design with simple, single-hole assembly allows the installation of the command switches directly at the scanning points. Exact adjustment is permitted by means of the precision metric thread. The limit switches EGT with inert gas contact (reed contact) can be operated up...
-
Euchner EKS-A-IEX-G01-ST02/03 Electronic-Key adapter, TCP/IPVendor: EuchnerSKU: 100401This electronic-key adapter with Ethernet TCP/IP interface is designed for secure data transfer to a control system. It features a durable PA6-GF30 housing, LED indicators for status monitoring, and supports open communication commands. Suitable for a wide range of industrial applications.
-
Euchner EKS-A-IUX-G01-ST01 Electronic key adapter with USB interfaceVendor: EuchnerSKU: 092750This electronic key adapter with a USB interface transfers data from the electronic key to a control system for processing. It features a Type B USB socket and operates with 24 V DC power. The adapter offers IP65 and IP67 protection, making it ideal...
-
Euchner EKS-A-K1BUWT32-EU Electronic-Key read/write, blueVendor: EuchnerSKU: 091045Elevate your access control and automation systems with the Euchner EKS-A-K1BUWT32-EU Electronic-Key Read/Write device. Designed to offer superior functionality and reliability, this electronic key solution is ideal for managing secure access and automating system processes in a range of industrial applications. Key Features: Electronic-Key...
-
Euchner EKS-A-K1GNWT32-EU Electronic-Key read/write, greenVendor: EuchnerSKU: 094839The Euchner EKS-A-K1GNWT32-EU Electronic-Key is a sophisticated read/write device designed to bolster security and streamline access control in industrial automation environments. Featuring a distinct green design for easy identification, this electronic key offers reliable performance and flexibility, making it a crucial component for effective...
-
Euchner EKS-A-K1RDWT32-EU Electronic-key read/write, redVendor: EuchnerSKU: 077859This is an electronic key from Euchner's EKS-A series, used for read/write identification and access control functions within safety automation systems. The key features an ABS housing and carries an IP65/IP67 rating, allowing use in environments with exposure to dust and moisture. Its compact...
-
Euchner EKS-A-K1YEWT32-EU Electronic-Key read/write, yellowVendor: EuchnerSKU: 094840The Euchner EKS-A-K1YEWT32-EU Electronic-Key is an advanced read/write device designed to enhance security and access control in industrial automation systems. Featuring a yellow design for easy identification, this electronic key provides reliable and flexible solutions for managing access and safeguarding critical systems. Its high-performance...
-
Euchner Electronic-Key adapter with PROFIBUS DP interfaceVendor: EuchnerSKU: 084800This Electronic-Key adapter connects Euchner Electronic-Key transponder keys to a PROFIBUS DP network, allowing key-based access and operating mode data to be read into the control system via a D-Sub 9-pin socket. Status LEDs indicate key presence in the actuating range, operational state and...
-
Euchner Electronic-Key adapter with PROFINET interfaceVendor: EuchnerSKU: 106305Optimize your industrial automation and access control systems with the Euchner Electronic-Key Adapter featuring a PROFINET interface. This advanced adapter integrates seamlessly with your PROFINET network, enabling secure and efficient management of electronic key systems within your automation environment. Key Features: PROFINET Interface:...
-
Euchner Emergency stop devices with housing, M12, 5-pinVendor: EuchnerSKU: 162943Ensure optimal safety and reliability in your industrial automation systems with the Euchner Emergency Stop Device. This high-performance device is engineered to offer rapid and effective emergency stopping capabilities, featuring a durable design suited for challenging environments. With its M12, 5-pin connection, it seamlessly...
-
Euchner Emergency stop, devices with housing, red, ø 40mmVendor: EuchnerSKU: 105018As per EN ISO 13850 the emergency stop function is a function that is intended to avert an impending hazard for personnel, damage to the machine or work in progress, or to alleviate existing hazards, and that is to be triggered by a single...
-
Euchner EMP-B-CET Mounting plate for actuator CETVendor: EuchnerSKU: 106694This mounting plate is used to fit the CET actuator to safety switches in the EMP-B series. Constructed from aluminium, it provides a fixed interface for correctly positioning and securing the actuator on the machine guard or door. It is typically used in safety...
-
Euchner EMP-L-CET Mounting plate CET read heads/switchesVendor: EuchnerSKU: 106695This mounting plate is designed for fitting CET read heads and switches within safety automation systems. Constructed from aluminium, it provides a mounting base for these components on machine guards or panels. It is typically used alongside Euchner CET safety switches as part of...
-
Euchner ES-HNAV-27 Plate for 40mm emergency stopVendor: EuchnerSKU: 106341This plate is designed for fitting to Euchner ES-XN safety switch devices that accommodate 40 mm emergency stop buttons, and is marked with the text "Emergency Stop" for clear identification at the point of use. It serves as a labelling and mounting accessory rather...
-
Euchner ES-XN4E-LL412Q4MFR Emergency stop, 30mmVendor: EuchnerSKU: 105016Ensure maximum safety and rapid response in your industrial applications with the Euchner ES-XN4E-LL412Q4MFR emergency stop. This highly visible and reliable emergency stop button is designed to provide an effective and immediate solution for halting machinery or processes during critical situations. Key Features: Emergency...
-
Euchner ES-XN4E-LL413Q4MFR Emergency stop button, 3NC1NOVendor: EuchnerSKU: 124712Button head, red, 44 mm ø Contact block monitoring Can be locked using padlock Reset by turning illuminated
-
Euchner ES-XW1E-LV412Q4MFR Emergency stop, red, 22mmVendor: EuchnerSKU: 105014As per EN ISO 13850 the emergency stop function is a function that is intended to avert an impending hazard for personnel, damage to the machine or work in progress, or to alleviate existing hazards, and that is to be triggered by a single...
-
Euchner ES502A Snap switchVendor: EuchnerSKU: 010371The ES502A is a snap-action safety switch used to detect the position of guards and doors on industrial machinery. It provides a positive-opening contact mechanism, allowing it to signal when a guard is not properly closed. Such switches are typically fitted to machine guarding...
-
Euchner ESH-ARO-20A-1205 Safety hinge with integrated safety functionVendor: EuchnerSKU: 106548This safety hinge combines mechanical hinge function with an integrated safety switch, monitoring the position of a guard door as it opens and closes. It is fitted directly to the door and frame, eliminating the need for a separate actuator and switch assembly. Such...
-
Euchner ESH-PRO Matching hinge without safety functionVendor: EuchnerSKU: 096007This hinge forms part of the ESH-PRO series and is fitted without an integrated safety function, serving purely as a mechanical mounting hinge. It is used alongside ESH-PRO safety hinges to support guard doors or panels at points where switching or monitoring is not...
-
Euchner ESH-PRO-11A-1205 Safety hinge, M12Vendor: EuchnerSKU: 095895This safety hinge switch is fitted to hinged guards to detect door position as part of a machine safety circuit, connecting via an M12 connector for straightforward panel wiring. It mounts directly on the hinge axis, allowing guard monitoring without additional actuators projecting from...
-
Euchner ESL-IH-AR-U-R30-SA Safety system, M12, unicodeVendor: EuchnerSKU: 115320The ESL-IH-AR-U-R30-SA is a guard locking safety switch with unicode M12 connection, designed for interlocking movable guards on machinery. It operates on the closed-circuit current principle with a locking force of 5000 N, and provides one guard lock monitoring NO contact plus two positively...
-
Euchner ESM-2H201 Safety relay, 2-hand controlVendor: EuchnerSKU: 085620The Euchner ESM-2H201 is a safety relay designed for two-hand control applications, providing two safety contacts with floating, positively driven relay outputs. It operates at 24 V AC/DC and mounts to a standard 35mm DIN rail, with connection via screw terminals housed in a...
-
Euchner ESM-BA301 Safety relay, 3 safety + 1 aux contactVendor: EuchnerSKU: 085613Euchner’s Safety Relays can be used up to Category 4, PL e. The ESM range has a large number of options with only a few different module types and well as various voltage ranges. Further to that there is the option of Time-delayed and...
-
Euchner ESM-F-ISI-2C2 Safety relay, screw, Din rail, 24VDCVendor: EuchnerSKU: 095122This safety relay is designed for DIN rail mounting within a control panel and operates from a 24VDC supply. It is used to monitor and switch safety-related circuits, such as those connected to emergency stop devices, safety gates, or other protective equipment, forming part...
-
Euchner ESN083069C417 Single limit switchVendor: EuchnerSKU: 083069This is a single limit switch from Euchner's safety automation range, used to detect the position of a guard or moving part within a machine. It provides a switching signal that can be incorporated into a machine's safety or control circuit to indicate whether...
-
Euchner ESN10B050AW250LN05V-M Connection cable, PNP, NO, 5mVendor: EuchnerSKU: 088773This is a connection cable with PNP output and normally open (NO) contact configuration, terminated with a 5 metre lead length. It is used to link compatible safety switching devices to a control system, carrying the switching signal from the safety component to the...
-
Euchner GLBF05D08-552-M Horizontal housing, spacing 8mmVendor: EuchnerSKU: 086578This GLBF05D08-552-M precision limit switch features an 8 mm plunger spacing and a horizontal housing design. It is equipped with a snap-action switching contact and a chisel plunger, making it ideal for high-precision applications in industrial environments. The switch offers reliable performance with IP67...
-
Euchner GP1-2131A-M Safety switch, M20 x 1.5Vendor: EuchnerSKU: 090255The safety switch GP is the counterpart to safety switch TP. The entire TP and GP product family possess the same actuation head and the same actuator. As a result, either the safety switches TP (with guard locking) or GP (without guard locking) can...
-
Euchner GP1-3131A-M Safety switch, M20 x 1.5Vendor: EuchnerSKU: 090258The safety switch GP is the counterpart to safety switch TP. The entire TP and GP product family possess the same actuation head and the same actuator. As a result, either the safety switches TP (with guard locking) or GP (without guard locking) can...
