This is a single hole fixing limit switch used to detect position or provide end-of-travel signalling within safety automation circuits. It mounts through a single hole, suiting applications where panel or machine space is limited. Typical use is on guarding and access points where mechanical position sensing forms part of the overall safety function.
| Plunger Material | Stainless Steel |
| Actuating Element | Ball Plunger (Short) |
| Actuating Force | 16 N |
| Approach Speed Connection Type | Max. 8 m/min |
| Connection Type | Plug Connector M12 (4-pin) |
| Number of NO Contacts | 1 |
| Design | Thread M14 x 1 |
| Mechanical Life | 30 x 10⁶ cycles |
| Degree of Protection | IP67 |
| Ambient Temperature | -25 ... +80 °C |
| Rated Insulation Voltage | 50 V |
| DC-13 Utilization Category | 0.3 A 24 V |
| AC-12 Utilization Category | 0.3 A 30 V |
| Short Circuit Protection | 0.4A gG |
| Minimum Switching Voltage | 1 V |
| Minimum Switching Current at 24 V | 1 mA |
| Repeat Accuracy (Absolute) | ±0.01 mm |