Sensing & Connectivity
-
Balluff BSP B600-HV004-A06A1A-S4 Pressure sensor w/o displayVendor: BalluffSKU: BSP00JCThis is a pressure sensor without integrated display, designed for direct installation into pneumatic or hydraulic circuits where pressure monitoring is required without local readout. The stainless steel housing and IP67 rating suit it to demanding industrial environments, whilst the M12x1 4-pin A-coded connector...
-
Balluff BIS M-4A7-082-401-07-S4 HF read/write heads, 13.56MHzVendor: BalluffSKU: BIS01E7This read/write head is part of Balluff's BIS M HF RFID system, operating at 13.56MHz to identify and exchange data with compatible data carriers in industrial tracking and process control applications. It communicates via IO-Link 1.1 and connects through an M12x1, 4-pin, A-coded male...
-
Balluff BOS 18MR-PA-LR10-S4 Retroreflective sensor, 0 - 9m rangeVendor: BalluffSKU: BOS0146This is a retroreflective photoelectric sensor with a rated operating distance of up to 9000mm, housed in a nickel-plated brass barrel with a PMMA sensing surface. It provides PNP normally open and normally closed switching outputs, operates from 10-30 VDC, and connects via an...
-
Balluff BTL7-P511-M0250-B-S32 Magnetostrictive linear position sensorVendor: BalluffSKU: BTL18CLThis sensor is a magnetostrictive linear position transducer that provides continuous, non-contact position measurement along its measuring length. It is used in industrial automation applications where precise linear position feedback is required for control systems. The BTL7-P511 series is typically fitted to cylinders, actuators...
-
Balluff BGL 30A-007-S49 Fork sensor, PNP, NO/NC, 30mm openingVendor: BalluffSKU: BGL001FThis infrared fork sensor provides high-precision object detection with a 30 mm fork opening. It offers a high switching frequency of 2000 Hz and is suitable for detecting small parts with a minimum size of 0.8 mm, ideal for fast-moving applications.
-
Balluff BUS M12M1-PPX-02/015-S04G Ultrasonic sensor, 1DOVendor: BalluffSKU: BUS0065This Balluff BUS M12M1-PPX-02/015-S04G is an ultrasonic sensor with a single digital PNP output, configurable as normally open or normally closed, for non-contact object detection at a rated operating distance of 150mm. Housed in nickel-plated brass and PBT with an M12x1, 4-pin male connector,...
-
Balluff BMF 305K-PS-C-2-S49-00,5 Magnetic sensor, PNP NO, 3-pinVendor: BalluffSKU: BMF005JThe Balluff BMF 305K-PS-C-2-S49-00,5 is a magnetic sensor with a PNP normally open output and a 3-pin M8x1 male connector, supplied with a 500mm cable. Its LCP housing and PUR jacket give it an IP67 rating, allowing use in environments exposed to dust and...
-
Balluff BMS CS-M-D12-IZ-02 Flexible mounting systemVendor: BalluffSKU: BAM035NThis mounting system is designed to clamp and secure cylindrical sensors of matching diameter in position on machinery or panel structures. The housing and grip are constructed from chrome-plated zinc die-casting, giving a compact clamp measuring 39.1mm in length and 27mm in diameter. It...
-
Balluff BOS R090K-PU-RH10-S75 Diffuse sensor, b/ground suppres.Vendor: BalluffSKU: BOS029MThe BOS R090K-PU-RH10-S75 is a diffuse photoelectric sensor with background suppression, providing a rated operating distance of 350mm. It features a PNP switching output configurable as normally open or normally closed, with an M8x1 4-pin connector for field wiring. The housing is rated IP67,...
-
Balluff BES M18ME-PSC50B-S04G Inductive sensor, PNP, NOVendor: BalluffSKU: BES04R0The BES M18ME-PSC50B-S04G is an M18 inductive proximity sensor with a PNP normally open output, providing a rated operating distance of 5mm. It is housed in a nickel-free coated brass body with a PBT sensing face, rated IP68, and is designed for flush mounting...
-
Balluff BTL7-E501-M0150-B-S32 Magnetostrictive linear sensorVendor: BalluffSKU: BTL070EThis is a magnetostrictive linear position sensor from the BTL7-E501 series, used to measure position and displacement in hydraulic cylinders and automation equipment where absolute, non-contact feedback is required. The sensor housing is anodized aluminium with an FKM O-ring seal, rated IP67 with the...
-
Balluff BOS 6K-PU-PT10-S75 Retroreflective sensor, PNP, NO/NCVendor: BalluffSKU: BOS01L8This retroreflective sensor detects objects by reflecting a light beam off a separate reflector, switching its PNP output (NO/NC selectable) when the beam is interrupted. It operates over a rated distance of 2000mm, with an M8x1 four-pin connector for cabling and M3 screw mounting...
-
Balluff BES M18MG-PSC16F-S04G Inductive sensor, PNP, NOVendor: BalluffSKU: BES03RMThis M18 inductive sensor from Balluff detects metallic targets at a rated operating distance of 16 mm and provides a PNP normally open output for 10–30 VDC control circuits. The brass, nickel-free coated housing with PBT sensing surface and IP68 rating suit non-flush mounting...
-
Balluff BES R05KB-PSC40B-EV02 Inductive standard sensor, PNP, NOVendor: BalluffSKU: BES01ZAThe BES R05KB-PSC40B-EV02 is an inductive standard sensor with a PNP normally open output, detecting targets at a rated operating distance of 4mm. It operates from 10-30 VDC, switches at up to 400 Hz, and is rated IP67 for use in demanding industrial environments....
-
Balluff BCC M444-0000-2A-000-41X475-000 Field attachable, maleVendor: BalluffSKU: BCC06ZCThis is a field attachable M12x1 male connector with angled body and 4-pin A-coded termination, wired via screw terminals to accommodate conductor cross sections from 0.14 to 0.75 mm². The housing and grip are made of PA with a zinc die-cast jacket/cover nut and...
-
Balluff BCC M445-0000-1A-000-51X475-000 Field attachable, femaleVendor: BalluffSKU: BCC06Y8This is a field-attachable M12x1 female connector, angled, with 5-pin A-coded termination via screw terminals, suitable for on-site assembly onto cables with a diameter of 6mm to 8mm. The housing is PA with a zinc die-cast jacket/cover nut and brass contacts, and the connector...
-
Balluff BFO D22-XB-LB-EAK-15-02 Plastic and glass fibers, 2mVendor: BalluffSKU: BFO0066This is a fibre optic cable assembly for use with photoelectric sensor amplifiers, transmitting light signals for object or edge detection where electrical sensing is unsuitable or space is limited. Its stainless steel housing and PE jacket suit installation in industrial environments, and the...
-
Balluff BCC M415-M415-M415-U0016-000 Tee coupler, M12Vendor: BalluffSKU: BCC09MUThis M12 tee coupler allows a single field cable run to branch into two additional M12 connections, with one male 5-pin A-coded connection and two female 5-pin A-coded connections. The housing is glass-fibre reinforced PA 6.6 with a brass, nickel-plated cover nut, and gold-plated...
-
Balluff BMS RS-M-D12-0250-00 Universal mounting systemVendor: BalluffSKU: BAM002TThis support bar mounting system, made of anodized aluminum, is ideal for secure sensor mounting, offering a dimension of Ø 12 x 250 mm and a robust holding system with easy installation.
-
Balluff BCS M30BBM2-PPM20C-S04G Capacitive sensorVendor: BalluffSKU: BCS004MThe BCS M30BBM2-PPM20C-S04G is a capacitive sensor with an M30 x 1.5 thread, designed for flush mounting and housed in PBT construction. It offers a rated operating distance of 20 mm, a PNP NO/NC programmable switching output, and a switching frequency of 100 Hz,...
