Sensing & Connectivity
-
Balluff BNS 819-D04-R12-100-10 Mechanical multiple position limit switchVendor: BalluffSKU: BNS00J4This is a mechanical multiple position limit switch with an anodized aluminium housing and gold-plated silver contacts, rated IP67 for protection against dust and water ingress. It is designed for direct actuation via a mechanical operator, with screw terminal connections for up to four...
-
Balluff BMF 204K-PS-C-2A-SA2-S4-00,3 Magnetic field sensor for C-slotVendor: BalluffSKU: BMF00A6This magnetic field sensor is designed for mounting in a C-slot (Sommer/Festo slot 10) on pneumatic cylinders, detecting piston position via the magnetic field of the piston magnet. It provides a PNP normally open output with a switching frequency of 7000 Hz, operating from...
-
Balluff BNS 816-B04-PA-12-602-11 Inductive multiple position limit switchVendor: BalluffSKU: BNS039KThe BNS 816-B04-PA-12-602-11 is an inductive multiple position limit switch with an anodised aluminium housing, rated IP67 for protection in demanding industrial environments. It offers up to four switch positions, each with a rated operating distance of 2.0mm and screw terminal connection, and provides...
-
Balluff BES M18ME1-GNX80B-S04G-EEX Inductive sensor, NAMURVendor: BalluffSKU: BES02ZWThe BES M18ME1-GNX80B-S04G-EEX is an M18 inductive sensor with a NAMUR interface, designed for flush mounting in an M18x1 housing of brass with a nickel-free coating and a PBT sensing face. It operates at 7.7-9 VDC with a rated voltage of 8.2 V and...
-
Balluff BAM MC-XA-023-D18,0-2-FL Proximity sensor mountVendor: BalluffSKU: BAM022LThis is a mounting accessory for cylindrical proximity sensors, providing a fixed clamp point for sensor bodies within automation equipment. The housing and grip are brass, with a part length of 48.5mm, and it is secured using clamps or screws. Tightening torque is specified...
-
Balluff BOS R020K-PS-RF11-02 Diffuse sensor, PNP, NOVendor: BalluffSKU: BOS020KThe BOS R020K-PS-RF11-02 is a diffuse photoelectric sensor with a PNP normally open output, designed to detect objects without requiring a reflector or receiver unit. It offers a rated operating distance of 30mm and operates from 10-30 VDC, switching at frequencies up to 800...
-
Balluff BOS 5K-PS-IX10-S75 Through-beam sensor, PNP, NOVendor: BalluffSKU: BOS0126This through-beam sensor from Balluff detects objects by interrupting a light beam between separate emitter and receiver units, providing a PNP normally open output on pin 4. It operates on 10-30 VDC, switches at up to 500 Hz, and connects via an M8x1 4-pin...
-
Balluff BES M30MM-PSC30F-S04G Inductive sensor, PNP, NOVendor: BalluffSKU: BES03REThe BES M30MM-PSC30F-S04G is an inductive proximity sensor with a PNP normally open output, housed in an M30x1.5 brass body with nickel-free coating and a PBT sensing face. It detects metal targets at a rated operating distance of 30 mm and is intended for...
-
Balluff BES M12MI-NOC40B-S04G Inductive sensor, NPN, NCVendor: BalluffSKU: BES004ZThis M12x1 inductive sensor from Balluff detects metal targets at a rated operating distance of 4 mm and provides an NPN normally closed output switching at up to 2500 Hz. Housed in brass with a nickel-free coating and a PBT sensing face, it is...
-
Balluff BES M12MI-PSC20B-S04G Inductive sensor, PNP, NOVendor: BalluffSKU: BES0060This M12x1 inductive sensor from Balluff detects metal targets at a rated operating distance of 2mm and provides a PNP normally open output switching at up to 3500 Hz. Its brass, nickel-free coated housing supports flush mounting, making it suitable for installation in confined...
-
Balluff BSP B600-EV009-P00S2B-S4 Pressure sensors with displayVendor: BalluffSKU: BSP00YKThis is a pressure sensor with integrated display, providing two switching outputs configurable as PNP or NPN, normally open or normally closed, for pressure monitoring in automation systems. It operates from an 18-30 VDC supply and switches at up to 170 Hz, connecting via...
-
Balluff BES M12EI-PSC40B-S04G-S01 Inductive sensor, PNP, NOVendor: BalluffSKU: BES02NCThis pressure-resistant inductive sensor is designed for flush mounting and can withstand pressures up to 60 bar. It features a 4 mm rated operating distance and PNP normally open (NO) switching output, making it suitable for tough industrial applications.
-
Balluff BCS M30BBI2-NSC15D-S04K Capacitive sensor, NPN, NOVendor: BalluffSKU: BCS00NEThe BCS M30BBI2-NSC15D-S04K is a capacitive proximity sensor with an M30x1.5 thread, housed in PBT and providing an IP67 rating for use in wet or contaminated environments. It detects targets at a rated operating distance of 15 mm and switches an NPN normally open...
-
Balluff BMP 01-EL1PP21A-0064-00-P02 Magnetic field positioning systemVendor: BalluffSKU: BMP0006This magnetic field positioning system is a Balluff BMP series device used to determine linear position via a magnetic field sensing principle, communicating over IO-Link 1.1. It operates on 15-30 VDC and is constructed with an aluminium and PA 12 housing/grip and a PUR...
-
Balluff BOS 6K-PU-RD10-S75 Diffuse sensor, PNP, NO/NCVendor: BalluffSKU: BOS01LLThe BOS 6K-PU-RD10-S75 is a diffuse photoelectric sensor with a PNP output configurable for normally open or normally closed switching. It has a rated operating distance of 800 mm and an M8x1, 4-pin male connector for field wiring, operating from 10 to 30 VDC....
-
Balluff BKT 67M-001-U-S92 Contrast sensor, 6 - 12mm rangeVendor: BalluffSKU: BKT0001This contrast sensor detects differences in print contrast on labels and packaging within a 6-12mm sensing range, making it suitable for print mark detection and registration tasks on packaging or labelling lines. The housing is aluminium die-cast with a PMMA sensing surface, and the...
-
Balluff BSP B020-IV010-P00S2B-S4 Front flush pressure sensorVendor: BalluffSKU: BSP00ZZThe BSP B020-IV010-P00S2B-S4 is a front flush pressure sensor from Balluff with an M12x1 male, 4-pin, A-coded connector for panel or machine integration. It provides two switching outputs, configurable as PNP or NPN, NO or NC, and communicates via IO-Link 1.1, operating on an...
-
Balluff BOS 5-HW-1 Mounting brackets, 2 adjustable axes, s/steelVendor: BalluffSKU: BAM00U5This mounting bracket accommodates two adjustable axes, allowing sensor position and angle to be set during installation and adjusted subsequently. It is constructed from stainless steel and secures via a threaded mounting type. Typical use is in industrial automation setups where photoelectric or inductive...
-
Balluff Inductive standard sensor, PNP, NO, D4.0 flush, M12 4-pinVendor: BalluffSKU: BES00J9This inductive sensor detects the presence of metal targets at a rated operating distance of 1.5mm and provides a PNP normally open output. Its flush mounting configuration and 4mm diameter, stainless steel housing suit compact installations where the sensor is mounted level with surrounding...
-
Balluff Pressure-rated inductive sensor, PNP, NO, M18 M12 4-pinVendor: BalluffSKU: BHS004JThis M18 inductive sensor from Balluff detects the presence of metal targets at a rated operating distance of 1.5mm, providing a PNP normally open switching output. Housed in stainless steel with an IP68 rating, it is designed for flush mounting in applications where exposure...
