080 782 4266 🚚 Free shipping over R3,000
Account
Account
Wish lists
Contact Us
Need help with your purchase, guidance on the products or any general assistance, please reach out to us.
Contact us
Description
xThis M12x1 inductive sensor from Balluff detects metal targets at a rated operating distance of 2mm and provides a PNP normally open output switching at up to 3500 Hz. Its brass, nickel-free coated housing supports flush mounting, making it suitable for installation in confined machine or panel spaces where the surrounding metal will not affect detection. Connection is made via a male 4-pin A-coded M12x1 connector, with operation across 10 to 30 VDC and a rated operating current of 200 mA.
Key specifications
- Operating voltage: 10 - 30 VDC
- Rated voltage: 24 V
- Connection: M12x1 / Male / 4-pin / A-coded
- Output: PNP normally open (NO)
- Mounting: Flush mounting
Specifications
x| Compliance/Certifications | CE UKCA cULus WEEE/ IEC 60947-5-2 |
| Material: Housing / Grip | Brass / Nickel-free coated |
| Material: Sensing Surface / Contacts | PBT |
| Size | M12x1 |
| Connection Type | M12x1 / Male / 4-pin / A-coded |
| Tightening Torque | 10 Nm |
| Rated Operating Distance (mm) | 2mm |
| Switching Output | PNP normally open (NO) |
| Switching Frequency (Hz) | 3500 Hz |
| Rated Insulation Voltage | 250 VAC |
| Operating Voltage | 10 - 30 VDC |
| Rated Voltage | 24 V |
| Mounting Type | Flush mounting |
| Rated Operating Current | 200 mA |
Documents
xAlternatives
x- Choosing a selection results in a full page refresh.