080 782 4266 🚚 Free shipping over R3,000
Account
Account
Wish lists
Contact Us
Need help with your purchase, guidance on the products or any general assistance, please reach out to us.
Contact us
Description
xThe BCS S04K501-PICFNG-S04G-T50 is a capacitive level sensor housed in stainless steel with a PEEK sensing surface, suitable for detecting media levels in demanding process environments. It provides a PNP normally open switching output with IO-Link 1.1 communication, operating from an 18-30 VDC supply, and connects via an M12x1 4-pin A-coded connector. With an IP68 rating (IP69K at the connector exit) and non-flush mounting, it is suited to industrial vessels and tanks where wash-down or ingress protection is required.
Key specifications
- IP rating: IP68, IP69K at connector exit
- Operating voltage: 18 - 30 VDC
- Rated voltage: 24 V
- Connection: M12x1 / Male / 4-pin / A-coded
- Output: PNP normally open (NO)
- Mounting: Non-flush mounting
Specifications
x| IP Rating | IP68, IP69K at connector exit |
| Compliance/Certifications | CE UKCA WEEE cULus / IEC 60947-5-2 |
| Material: Housing / Grip | Stainless steel |
| Material: Jacket / Cover Nut | Stainless steel |
| Material: Sensing Surface / Contacts | PEEK |
| Part Length (mm) | 96mm |
| Part Diameter (mm) | 30mm |
| Connection Type | M12x1 / Male / 4-pin / A-coded |
| Tightening Torque | 20 - 25 Nm |
| Switching Output | PNP normally open (NO) |
| Switching Frequency (Hz) | 5 Hz |
| Rated Insulation Voltage | 75 VDC |
| Operating Voltage | 18 - 30 VDC |
| Rated Voltage | 24 V |
| Interface | IO-Link 1.1 |
| Mounting Type | Non-flush mounting |
| Rated Operating Current | 50 mA |
Documents
xAlternatives
x- Choosing a selection results in a full page refresh.