This is a retroreflective photoelectric sensor with a rated operating distance of up to 9000mm, housed in a nickel-plated brass barrel with a PMMA sensing surface. It provides PNP normally open and normally closed switching outputs, operates from 10-30 VDC, and connects via an M12x1 four-pin male connector. The IP67-rated housing and M18x1 nut mounting suit installation in industrial environments where object or reflector detection over longer distances is required.
Key specifications
| IP Rating | IP67 |
| Compliance/Certifications | CE UKCA cULus WEEE / IEC 60947-5-2 |
| Material: Housing / Grip | Brass / Nickel-plated |
| Material: Sensing Surface / Contacts | PMMA |
| Part Length (mm) | 93.5mm |
| Part Diameter (mm) | 18mm |
| Connection Type | M12x1 / Male / 4-pin |
| Tightening Torque | 22 Nm |
| Rated Operating Distance (mm) | 9000mm |
| Switching Output | PNP normally closed (NC) PNP normally open (NO) Pins 4-2 |
| Switching Frequency (Hz) | 1500 Hz |
| Rated Insulation Voltage | 75 VDC |
| Operating Voltage | 10 - 30 VDC |
| Mounting Type | Nut M18x1 |
| Rated Operating Current | 100 mA |