Schneider Electric
-
Schneider Slim interface plug-in relay, 1 c/o, 24VDC, 6AVendor: Schneider ElectricSKU: RSL1AB4BDThis is a slim plug-in interface relay with a single changeover (1 C/O) contact, rated 24VDC and 6A, using silver alloy (AgSnO2) contacts. Its narrow 5mm width suits high-density mounting in control panels where multiple relays are arranged side by side, and the IP40...
-
Schneider Micro switch, OF/SDE/PF, 4 NO/NCVendor: Schneider ElectricSKU: LV847905This auxiliary contact block provides 4 NO/NC signal contacts for use with MasterPact MTZ2 and MTZ3 circuit breakers, covering the OF, SDE and PF device positions. It is used for control signalling, switching low-power control circuits with breaking capacities ranging from 6 A AC-12...
-
Schneider Empty control station, die-cast, blue, 8 cut-outs, Ø 22mmVendor: Schneider ElectricSKU: XAPM4508This is an empty control station enclosure with eight cut-outs sized for 22mm control devices, allowing engineers to combine pushbuttons, selector switches, indicator lights and other components in a single housing. The die-cast construction provides a durable enclosure body, finished in blue. It is...
-
Schneider Contactor, 3-pole, 24VDC coil, 3NO, 440V, 12AVendor: Schneider ElectricSKU: LC1D123BLThis is a 3-pole contactor with a 24VDC coil and 3NO contacts, rated for a power circuit voltage up to 690V AC and current ratings of 16A (AC-1) or 12A (AC-3/AC-3e) at up to 440V AC. It is used for switching motor loads and...
-
Schneider APC Replacement Battery Cartridge, 2 year warrantyVendor: Schneider ElectricSKU: APCRBC135This replacement battery cartridge is intended for use with compatible Schneider APC uninterruptible power supply units, providing a like-for-like power source when the original battery reaches the end of its service life. It operates within a temperature range of 0 to 40 °C and...
-
Schneider Modbus line terminator for end of RS485 line, RJ45Vendor: Schneider ElectricSKU: VW3A8306RCThis RJ45 terminator is fitted at the end of an RS485 line to properly terminate Modbus communication runs. It plugs directly into a spare RJ45 port on the last device in the network segment. It is typically used in control panels and automation networks...
-
Schneider Circuit breaker, w/o micrologic, fixed, 4-pole, 2500AVendor: Schneider ElectricSKU: LV848076This is a fixed 4-pole circuit breaker rated at 2500 A, supplied without a Micrologic trip unit, for use in low-voltage distribution boards up to 690 VAC. It provides an IP30 degree of protection and is rated for operation across a temperature range of...
-
Schneider Micrologic 2.0 Shunt release, fixed, 100 - 130VDCVendor: Schneider ElectricSKU: 33661This shunt release is a fixed-mounting accessory for use with Schneider Micrologic trip units, operating on a 100-130VDC supply. It provides remote tripping of the associated circuit breaker on command from an external control signal, allowing the breaker to be opened independently of its...
-
Schneider TM50D Trip unit, thermal magnet, 3-pole, 50AVendor: Schneider ElectricSKU: C103TM050This trip unit combines thermal and magnetic protection for a 3-pole circuit at a 50A rating, providing overload and short-circuit protection within a control panel. It operates across a temperature range of -25 to 70°C and is suited to AC or DC systems up...
-
Schneider Light block with body/fixing collar, metal, BA9s bulbVendor: Schneider ElectricSKU: ZB4BV5D1This light block with metal body and fixing collar accepts a BA9s bulb and is designed for mounting on control panel doors and enclosures as part of a pilot light assembly. It has an IP20 rating and an operating temperature range of -40 to...
-
Schneider Push button head, metal, flush, black, Ø 22mmVendor: Schneider ElectricSKU: ZB4BH02This metal push button head has a flush black actuator with a 22mm mounting diameter, intended for assembly into Harmony-style control station enclosures. It carries an IP66 rating and is suited to operation across a temperature range of -40 to 70°C, making it applicable...
-
Schneider Adapter mechanism for rotary handle iC60, extendedVendor: Schneider ElectricSKU: A9A27008This adapter mechanism is designed for fitting an extended rotary handle to iC60 devices, enabling external door-mounted operation of the breaker. It is fixed mounting and maintains an IP55 rating when installed, suiting enclosures where dust and water ingress protection is required at the...
-
Schneider Energy meter, external CT, Din rail, clip-onVendor: Schneider ElectricSKU: A9MEM3250This Schneider energy meter uses an external CT connection and mounts to a DIN rail via a clip-on fixing, suiting installation within control panels and distribution boards. It is designed for use on 50 Hz systems and features screw terminal connections, with 6 mm²...
-
Schneider Miniature circuit-breaker, 3-pole, 16AVendor: Schneider ElectricSKU: A9F76316This is a 3-pole miniature circuit-breaker rated at 16A, providing overcurrent protection within control panels and distribution boards. It is designed for fixed mounting on rail systems, with terminals accepting rigid conductors from 1 to 25 mm² or flexible conductors from 1 to 16...
-
Schneider Optimized and performance expansion, 28 I/O'sVendor: Schneider ElectricSKU: TM172E28RThis expansion module adds 28 I/Os to a Schneider control system, extending the number of inputs and outputs available for connected field devices. It operates from a 24 V AC supply and carries an IP20 rating, suiting installation inside enclosed control panels. Rated for...
-
Schneider Light block for head, yellow, integral LED, Ø22Vendor: Schneider ElectricSKU: ZBVB8This is a yellow light block for a Ø22 head fitting, incorporating an integral LED for illuminated indication on control panel devices. It operates from a 24 V AC/DC supply at 50/60 Hz, drawing 18 mA, and connects via screw clamp terminals accepting a...
-
Schneider Terminal base, required for AS-P, 90 x 114mmVendor: Schneider ElectricSKU: SXWTBASW110002The TB-ASP-W1 is a terminal base for mounting AS-P and AS-P-SMK controllers within the EcoStruxure Building Operation system. It fixes to a DIN rail by claws and provides a connector for electrical termination, with a single slot accepting one controller. Rated for 24 VDC...
-
Schneider Spacelogic Terminal base required for power supply moduleVendor: Schneider ElectricSKU: SXWTBPSW110001The TB-PS-W1 is a terminal base for mounting a PS-24V power supply module within the EcoStruxure Building Operation system. It fits a DIN rail and is secured by claws, providing a single-slot internal electrical connection point for the power supply module. With an IP20...
-
Schneider AS-P SmartX Controller, 2 x RS-485, 2 x10/100 EthernetVendor: Schneider ElectricSKU: SXWASPXXX10001The AS-P is a SmartX building automation controller from the EcoStruxure Building Operation series, fitted with two RS-485 serial links and two 10/100 Ethernet ports for network connectivity. It supports BACnet/IP, BACnet MS/TP, Modbus TCP and Serial, and LonWorks TP/FT-10, allowing it to manage...
-
Schneider Inductive sensor, brass, M12, PNP, NC, 12 - 48VDCVendor: Schneider ElectricSKU: XS612B1PBM12This M12 inductive proximity sensor has a brass housing and detects targets at a sensing distance of 4 mm, making it suitable for flush mounting in confined panel or machine spaces. It operates from 12–48 VDC with a PNP output and connects via an...
