Euchner Safety Automation
-
Euchner MGBS-P-I-AP-U-R-ZZE-SBB Interlocking module, e-stopVendor: EuchnerSKU: 166240The MGBS-P-I-AP-U-R-ZZE-SBB is a safety interlocking module with integrated e-stop function, used to guard access points on machinery and process equipment. It connects via two M12, 5-pin plug connectors and carries an IP65 rating, allowing use in environments where dust and moisture ingress must...
-
Euchner, CET3-AR-CRA-CH-50X-SG, Non-contact safety switchVendor: EuchnerSKU: 110906The CET3-AR-CRA-CH-50X-SG is a non-contact safety switch from Euchner, housed in stainless steel and die-cast aluminium and fitted with two M12 plug connectors (5- and 8-pin) for wiring. It operates on a 24 V DC solenoid supply with reverse polarity protection and regulated, low-ripple...
-
Euchner STM1A-222B024-MC2160 Safety switch, 1 LED, greenVendor: EuchnerSKU: 098856This Euchner STM1A-222B024-MC2160 is a solenoid interlock safety switch fitted with a single green LED indicator, used to monitor and secure guards or access doors on industrial machinery. The housing is constructed from silver alloy and gold-flashed, reinforced thermoplastic, with an IP67 rating suiting...
-
Euchner MGB-E-A2 Escape release moduleVendor: EuchnerSKU: 106051The MGB-E-A2 is an escape release module forming part of the Euchner MGB safety locking device series, allowing manual release from within a guarded area to permit egress. It is constructed with a die-cast zinc, powder-coated, and stainless steel housing, suiting installation on machine...
-
Euchner CES-AZ-AES-02B Evaluation unit for 2 read headsVendor: EuchnerSKU: 104775This evaluation unit is designed for use with two CES safety read heads, forming part of a coded non-contact safety switch system. It processes signals from the read heads to enable monitoring of guard positions within a safety circuit. The unit has a plastic...
-
Euchner MGB-L2HC-ARA-R Locking set, incl label carrierVendor: EuchnerSKU: 112531The MGB-L2HC-ARA-R is a locking set from Euchner's MGB modular safety gate box range, supplied with a label carrier, used to secure hinged or sliding guards on machinery until safe conditions are met. It is rated IP65 and combines a die-cast zinc, fibre glass,...
-
Euchner N01K550-M Single limit switch, ball plungerVendor: EuchnerSKU: 084904The N01K550-M is a single limit switch fitted with a ball plunger actuating element, used for position detection and monitoring on machinery and panels. The housing is made from anodised die-cast alloy with silver alloy, gold-flashed contacts, and the unit connects via an M12...
-
Euchner MGB-B-A1W2A2-PN, Bus module MGB-B...-PN... with 3 controls and indicators, push-pull plug, MERCEDES SPECIAL #QEV111AGUTEYVendor: EuchnerSKU: 123759This bus module is part of the Euchner MGB-B multifunctional gate box series, configured with three controls and indicators and a push-pull plug connection. It operates on PN (Profinet) communication, allowing integration into safety automation systems on machine guarding applications. The unit is typically...
-
Euchner MGBS-H-BA1A10-R Handle module, short, 117mmVendor: EuchnerSKU: 166532This handle module forms part of the Euchner MGB system, providing a door handle for access points on safety-guarded machinery. The housing is constructed from fibre glass reinforced plastic, nickel-plated die-cast zinc and stainless steel, giving an IP65 rating suitable for industrial environments. At...
-
Euchner RPS-M-3131SC300SFM5 Rope pull switch, pull-to-resetVendor: EuchnerSKU: 119844The RPS-M-3131SC300SFM5 is a rope pull switch with a pull-to-reset mechanism, housed in die-cast aluminium and fitted with an M12 plug connector for wiring. It is designed for use in emergency stop applications along conveyors or machine lines, where a pulled rope actuates the...
-
Euchner TZ1LE024MVAB Safety switch, aux release on frontVendor: EuchnerSKU: 083965The TZ1LE024MVAB is a solenoid-interlocked safety switch from the Euchner TZ1 series, featuring an auxiliary release on the front and a die-cast alloy housing with silver alloy, gold-flashed contacts. It operates at a solenoid voltage of 24 V AC/DC and switches loads within the...
-
Euchner EKS-A-K1RDWT32-EU Electronic-key read/write, redVendor: EuchnerSKU: 077859This is an electronic key from Euchner's EKS-A series, used for read/write identification and access control functions within safety automation systems. The key features an ABS housing and carries an IP65/IP67 rating, allowing use in environments with exposure to dust and moisture. Its compact...
-
Euchner SN02D12-502-M Limit Switch, 1NC + 1NO, 12mmVendor: EuchnerSKU: 082165This limit switch provides one normally closed and one normally open contact in a 12 mm housing format. It is used to detect the position or presence of moving machine parts, feeding signals into control or safety circuitry. Typical applications include machine guarding and...
-
Euchner A-C40-113869 Actuator, 600N, 2 x M5x16 screws includedVendor: EuchnerSKU: 113869\nDescription\n\n\nActuator\nThe anchor plate for the CEM actuator has spring mountings and can be tilted to an angle of +/-4°.\n\nTherefore, when a misadjusted safety door is closed, the CEM actuator automatically adjusts itself to the surface of the solenoid. Subsequent adjustment of the safety door...
-
Euchner SN04R12-502-M Multiple limit switch, 1NC + 1NO, 12mm spacingVendor: EuchnerSKU: 082161This SN04R12-502-M limit switch is equipped with a roller plunger for precise actuation. It features a snap-action switching contact with 1 NC and 1 NO configuration, housed in an upright die-cast aluminum housing. It offers IP67 protection and is ideal for use in industrial...
-
Euchner MSC-CB-AC-FI8FO4S Safety relay, 8 single-channelVendor: EuchnerSKU: 166057The Euchner MSC-CB-AC-FI8FO4S is a modular safety relay unit providing 8 single-channel safety inputs, 2 safety semiconductor outputs (OSSD) and 4 programmable monitoring outputs, all p-switching and short-circuit-proof according to EN 61131-2. It operates from a 24 V DC PELV supply and mounts on...
-
Euchner TZ1LE024M-C1684 Safety switch, escape release + pushbuttonVendor: EuchnerSKU: 083170This TZ1LE024M-C1684 safety switch with escape release and pushbutton is designed for industrial safety applications. It features two LED displays, an auxiliary release on the front, and an escape release on the rear. The housing is made of anodized die-cast alloy, and the switch...
-
Euchner N01R550SVM5-M Single limit switch, roller plunger, M12Vendor: EuchnerSKU: 88622This limit switch uses a roller plunger actuator and is fitted with an M12 connector for cable connection. The housing is constructed from anodised die-cast aluminium alloy with gold-flashed contacts, and the unit operates within a temperature range of -5 to 80°C, requiring an...
-
Euchner MGBS-P-L2HE-AR-U-R-SH Locking module + handle, right hingedVendor: EuchnerSKU: 164688The MGBS-P-L2HE-AR-U-R-SH is a locking module with right-hinged handle from Euchner's MGB safety locking series, used for guarding access points on machinery and process equipment. It connects via a single M23 19-pin plug connector and operates from a 24 V supply, drawing 6 W,...
-
Euchner MGBS-P-L2-AR-U-R-AEE-SH Locking module, w/o handleVendor: EuchnerSKU: 161678The Euchner MGBS-P-L2-AR-U-R-AEE-SH is a safety guard locking module operating on the open-circuit current principle, whereby locking is actuated by power-ON and released by spring force. It is designed for door hinge left/right installation and includes an escape release actuated by pushing, together with...
