Enclosure
-
Rittal AX Compact enclosure, stainless steel, 300x600x210mmVendor: RittalSKU: 1008.000Product OverviewThe AX 1008.000 is a robust stainless steel basic enclosure designed for demanding industrial applications requiring superior environmental protection and system flexibility in a vertical format. This single-door wall-mounted enclosure features high-grade stainless steel 1.4301 (AISI 304) construction with integrated mounting plate and...
-
Rittal TS Side panel, screw-fastened for (WD) 2000 x 500mmVendor: RittalSKU: 8105.235This screw-fastened side panel for TS enclosures offers IP 55 protection and features an earthing bolt for enhanced EMC protection. Constructed from 1.5 mm sheet steel, it is suitable for secure industrial enclosures.
-
Rittal VX Punched section with flange 23x89mm for (W/D)600mmVendor: RittalSKU: 8100.732This punched section with mounting flange is designed for the VX and VX SE enclosures, providing flexible interior mounting options. Made from stainless steel, it is suitable for cable routing and busbar support installations.
-
Rittal VX Baying enclosure system, steel, 600x2000x800mmVendor: RittalSKU: 8608.000The Rittal VX is a baying enclosure system. It is supplied in light grey.Key specificationsColour: Light Grey
-
Rittal VX Base/plinth corner piece, sheet steel, 200x1000mmVendor: RittalSKU: 8620.024This base/plinth corner piece with 200 mm trim panels enhances stability for the VX enclosure series. Made from sheet steel with plastic covers, it offers IP55 protection and includes assembly parts for a secure enclosure foundation.
-
Rittal TS Side panel, screw-fastened for (WD) 1600 x 500mmVendor: RittalSKU: 8165.235This screw-fastened side panel for TS enclosures provides automatic potential equalization, EMC protection, and IP 55 security. Made of 1.5 mm sheet steel, it is suitable for installations requiring durable enclosure protection.
-
Rittal AX Compact enclosure, sheet steel, 600x760x350mmVendor: RittalSKU: 1376.000The AX wall-mounted enclosure with embossed enclosure cams in the roof, base and side replicates the familiar 25 mm system grid from the VX25 large enclosure. Thanks to this unique, patented system, AX wall-mounted control enclosures are prepared for all expansion and retrofit cases....
-
Rittal VX Base/plinth corner piece, sheet steelr, 100x300mmVendor: RittalSKU: 8620.000Base/plinth corner pieces with molded self-positioning to the bayed enclosure system, for use with or without trim panels depending on the application. Large openings in the base/plinth corner piece for best access to the screw-fastening point can be covered using bay and corner covers.
-
Rittal SZ Rail for EMC rail and stain relief for (W) 800mmVendor: RittalSKU: 2388.850This system accessory rail is engineered for EMC shielding and provides strain relief, designed to be mounted in various positions within electrical enclosures, enhancing performance and safety.
-
Rittal KX E-Box with door, sheet steel, 150 x 150 x 120mmVendor: RittalSKU: 1553.000This small sheet steel enclosure is designed for use in electrical installations. It features a 150 x 150 x 120 mm structure, offering IP66 protection and NEMA ratings for industrial environments. The enclosure includes a mounting plate and a cam lock for secure closure.
-
Rittal AE Compact enclosure, sheet steel, 380x300x155mmVendor: RittalSKU: 1030.500Product Overview Long Description The AX 1030.500 is a compact, robust wall-mounted enclosure designed for industrial applications that demand reliable environmental protection and straightforward system integration. This single-door enclosure is built from high-quality sheet steel with an all-round foamed-in PU seal to ensure lasting...
-
Rittal DK Component shelf, slotted, 471x29x500mmVendor: RittalSKU: 7165.035This component shelf for frame attachment is suitable for 600 mm and 800 mm enclosures without 482.6 mm (19") accommodation. With a load capacity of up to 50 kg, it features slotted sections to reduce heat accumulation, making it ideal for network equipment storage.
-
Rittal SK Compressor, 230VVendor: RittalSKU: 3397.052This grille supports airflow and provides a protective barrier for cooling units. Compact and reliable, it fits well within industrial enclosure cooling systems.
-
Rittal SK Fan and filter unit, 230V, 148.5 x 148.5 x 16mmVendor: RittalSKU: 3238.100This TopTherm fan-and-filter unit utilizes diagonal fan technology for stable airflow and efficient heat dissipation. It offers IP54 protection with optional pleated filter use, and has a noise level of 46 dB(A) at 50 Hz.
-
Rittal VX Baying enclosure system, steel, 800x2000x800mmVendor: RittalSKU: 8808.000This is a Rittal VX baying enclosure with dimensions of 800 x 2000 x 800mm, constructed from sheet steel and finished in light grey (RAL 7035). Baying enclosures of this type are designed to be joined side by side, forming extended enclosure suites for...
-
Rittal AX Compact enclosure, sheet steel, 600x380x350mmVendor: RittalSKU: 1339.000The AX wall-mounted enclosure with embossed enclosure cams in the roof, base and side replicates the familiar 25 mm system grid from the VX25 large enclosure. Thanks to this unique, patented system, AX wall-mounted control enclosures are prepared for all expansion and retrofit cases....
-
Rittal AE Compact enclosure, stainless steel, 600x600x210mmVendor: RittalSKU: 1010.600Product Overview The AE 1010.600 is a large compact stainless steel enclosure designed for demanding industrial applications requiring superior environmental protection and corrosion resistance. This single-door wall-mounted enclosure features high-grade stainless steel 1.4301 (AISI 304) construction with integrated mounting plate, providing reliable protection for...
-
Rittal VX Section for cable entry, centre, for (W) 600mmVendor: RittalSKU: 8618.800This cable entry section attaches to gland plates, enabling direct routing of cables without large bends. It ensures a secure fit with high sealing properties, making it ideal for top-mounted cable installations.
-
Rittal VX Side panel, screw, sheet steel, for (HD)2000x800mmVendor: RittalSKU: 8108.245This screw-fastened side panel for VX enclosures is made from 1.5 mm sheet steel, offering IP55 protection. It includes assembly parts for easy installation, supports automatic potential equalization, and provides enhanced EMC protection for industrial applications.
-
Rittal SV Busbar cover section for (WH) 40 - 60x10mm, (L) 1mVendor: RittalSKU: 3085.000This busbar cover section provides contact hazard protection by fully encapsulating busbars. Made from thermally modified hard PVC, it is designed for busbars sized 40 x 10 to 60 x 10 mm and can be cut to required lengths, suitable for safe electrical installations.
-
Rittal SZ Earth strap, M8 - M8, for Ø 16mm², (L) 300mmVendor: RittalSKU: 2568.000This earth strap with M6 and M8 ring terminals ensures reliable earthing with optimal contact. Measuring 300 mm in length and with a cross-section of 16 mm², it provides a secure grounding connection for enclosure setups.
-
Rittal VX Bayed enclosure system, (WHD) 600 x 1800 x 600mmVendor: RittalSKU: 8686.000This bayed enclosure system is designed for assembling multiple enclosures side by side to form extended control panel installations. With dimensions of 600 x 1800 x 600mm, it provides housing for automation and control equipment within industrial panel builds. Bayed configurations of this type...
-
Rittal VX Base/plinth trim panel, side, (HD) 100 x 800mmVendor: RittalSKU: 8620.034Base/plinth trim panels are used depth-wise for laterally closing a base/plinth unit. The trim panel can be used in between two bayed enclosures to stabilize the base/plinth corner pieces. The 100 mm high trim panels can also be used and combined in 200 mm...
-
Rittal KX E-Box with door, sheet steel, 200 x 400 x 120mmVendor: RittalSKU: 1550.000This E-Box enclosure, made of sheet steel, provides IP66 and NEMA 4 protection. With a zinc-plated mounting plate and cam lock, it is designed for secure housing of components in demanding conditions.
-
Linkwell Fan and filter, panel mount, IP54, 325x325Vendor: LinkwellSKU: FK5527.300This Linkwell FK5527.300 exhaust filter measures 325x325 mm with a protected opening of 292x292 mm, providing IP54 protection. It efficiently removes heated air from enclosures, maintaining optimal temperatures.
-
IDE Distribution cabinet, opaque door, 1810x730x250mmVendor: IDESKU: 40ENL192-240POIP40-IP55 Steel distribution cabinets (192-288 modules), IP40 COMBINABLE SURFACE DISTRIBUTION CABINET OPAQUE DOOR 192-240 MOD.\nThe material used is: \n\nBody, sides, and top and bottom covers made of 1,2-mm thick EN10130+A1 cold-rolled steel.\nOpaque doors made of 1,2-mm thick EN10130+A1 cold-rolled steel.\nTransparent doors made of 4-mm...
-
IDE Distribution cabinet, opaque door, 2110x730x250mmVendor: IDESKU: 40ENL216-288POIP40-IP55 Steel distribution cabinets (192-288 modules), IP40 COMBINABLE SURFACE DISTRIBUTION CABINET OPAQUE DOOR 216-288 MOD.\n The material used is: \n\nBody, sides, and top and bottom covers made of 1,2-mm thick EN10130+A1 cold-rolled steel.\nOpaque doors made of 1,2-mm thick EN10130+A1 cold-rolled steel.\nTransparent doors made of...
-
Stego Thermostat, 2-state regulator, NC, 0 - 60°C, 250VAC, 10AVendor: StegoSKU: 01140.9-00The mechanical thermostats KTO 011 (contact breaker) and KTS 011 (contact maker) are two state regulators used to control heaters, coolers, filter fans or signal devices. KTO 011 Thermostat (NC); contact breaker for regulating heaters. The contact opens when temperature is rising. \n\nLarge setting...
-
Stego Thermostat, 2-state regulator, NC, 20 - 80°C, 250VAC, 3AVendor: StegoSKU: 01159.0-00The mechanical thermostats KTO 011 (contact breaker) and KTS 011 (contact maker) are two state regulators used to control heaters, coolers, filter fans or signal devices. KTO 011 Thermostat (NC); contact breaker for regulating heaters. The contact opens when temperature is rising.\n\nLarge setting range\nSmall...
-
Elfin Push-button enclosure, 5 hole Ø 22, 82x202x85mmVendor: ElfinSKU: 040X0820-8P5L\nNew Elfin, while projecting, obviously considers all the technical aspects but also the design and the aesthetics, to always perfectly integrate the equipment that the enclosure will house. Moreover, there are many possibilities to customise the products according to your specifications.\n\n\nThe first factor to...
-
Elfin Push-button enclosure, 4 hole Ø 22, 92x152x70mmVendor: ElfinSKU: 040C0915-7P4\nNew Elfin, while projecting, obviously considers all the technical aspects but also the design and the aesthetics, so as to always perfectly integrate the equipment that the enclosure will house. Moreover, there are many possibilities to customise the products according to customer’s specifications. Strong...
-
IDE Galvanised wall-mounting supportVendor: IDESKU: 48427Wall-mounting support with ATLANTIC: 40SUP-40ENL-65SUP cabinets. Material used is Galvanised steel. They are attached to the rear part of the cabinet vertically or horizontally and it does not require specific recycling operations.
-
IDE Lid Kits, 120 Modular CapacityVendor: IDESKU: S120P150Lid Kits with Atlantic surface cabinets. The material used is RAL 9003 ABS. Supplies 5 150-mm modular lids + 2 50-mm blind lids + 5 DIN rails. Features 120 modules and it does not require specific recycling operations.
-
IDE Distribution box, 1x12 DIN rail, 246x310x148Vendor: IDESKU: CDN12PTDin rail mount IP65 enclosure - Excludes Earth / Nuetral Bar. Exterior dimensions (Height x Width x Depth): 246x310x148mm. Halogen-free plastic materials. Frame and base: ABS. Recommendend for outdoor use: UV protection under ISO standard 4892-2, Method A: 500h
-
IDE Combinable distribution cabinet w/o door, 910x670x212mmVendor: IDESKU: 40ENL96-120IP40-IP65 Steel distribution cabinets (48-192 modules), IP40 COMBINABLE DISTRIBUTION CABINET 96-120 MOD.\n\nThe material used is:\n\n\nBody, sides, top and bottom covers for surface cabinets and frames for flush-fit cabinets manufactured in cold-rolled steel EN10130+A1 with a thickness of 1,2 mm.\nBody for flush-fit cabinets manufactured in...
-
Stego Temperature and humidity sensor, 24VDC, 4 - 2mAVendor: StegoSKU: 01420.2-00The compact Smart Sensor CSS 014 electronically records temperature and humidity and converts the measured data into a standardized analogue 4-20 mA or a digital IO-Link signal. The converted value signals can be utilized or further processed by a control or monitoring unit, e.g....
-
Stego Thermostat, 2-state regulator, NO, 20 - 80°C, 250VAC, 3AVendor: StegoSKU: 01158.0-00The mechanical thermostats KTO 011 (contact breaker) and KTS 011 (contact maker) are two state regulators used to control heaters, coolers, filter fans or signal devices. KTS 011 Thermostat (normally open); contact maker for regulating of filter fans and heat exchangers or for switching...
-
IDE Distribution box, watertight, 2x12, DIN, 436x310x148Vendor: IDESKU: CDN24PTDin rail mount IP65 enclosure - Excludes Earth / Neutral Bar \nExterior dimensions (Height x Width x Depth): 436x310x148mm\nHalogen-free plastic materials. Frame and base: ABS. Suitable for outdoor use: UV protection under ISO standard 4892-2, Method A: 500h \nABS watertight distribution boxes (Sealable)
-
Elfin Push-button enclosure, 9 hole Ø 22, 140x180x125mmVendor: ElfinSKU: 040X1418-12P9\nNew Elfin, while projecting, obviously considers all the technical aspects but also the design and the aesthetics, to always perfectly integrate the equipment that the enclosure will house. Moreover, there are many possibilities to customise the products according to your specifications.\n\n\nThe first factor to...
-
IDE Combinable distribution cabinet w/o door, 1310x670x212mmVendor: IDESKU: 40ENL144-192IP40-IP65 Steel distribution cabinets (48-192 modules), IP40 COMBINABLE DISTRIBUTION CABINET 144-192 MOD.\nThe material used is:\n\nBody, sides, top and bottom covers for surface cabinets and frames for flush-fit cabinets manufactured in cold-rolled steel EN10130+A1 with a thickness of 1,2 mm.\nBody for flush-fit cabinets manufactured in...
-
Linkwell Copper busbar, 384A, 25x5mmVendor: LinkwellSKU: Cu222This copper busbar is designed for power distribution, providing reliable performance in high-current industrial applications. It offers excellent conductivity and durability, ideal for heavy-duty power systems.
-
Elfin Push-button enclosure, undrilled, 92x152x100mmVendor: ElfinSKU: 040C0915-1N\nNew Elfin, while projecting, obviously considers all the technical aspects but also the design and the aesthetics, so as to always perfectly integrate the equipment that the enclosure will house. Moreover, there are many possibilities to customise the products according to customer’s specifications. Strong...
-
Elfin Push-button enclosure, undrilled, 30x257x100mmVendor: ElfinSKU: 040C2325-1NNew Elfin, while projecting, obviously considers all the technical aspects but also the design and the aesthetics, so as to always perfectly integrate the equipment that the enclosure will house. Moreover, there are many possibilities to customise the products according to customer’s specifications. Strong...
-
Elfin Push-button enclosure, 6 hole Ø 22, 82x202x85mmVendor: ElfinSKU: 040X0820-8P6\nNew Elfin, while projecting, obviously considers all the technical aspects but also the design and the aesthetics, to always perfectly integrate the equipment that the enclosure will house. Moreover, there are many possibilities to customise the products according to your specifications.\n\n\nThe first factor to...
-
IDE Lid Kits, 192 Modular CapacityVendor: IDESKU: S192P150Lid Kits with Atlantic surface cabinets. The material used is RAL 9003 ABS. Supplies 8 150-mm modular lids + 1 50-mm blind lid + 8 DIN rails. Features 192 modules and it does not require specific recycling operations.
-
Elfin Push-button enclosure, 6 hole Ø 22, black, 85x274x60Vendor: ElfinSKU: 080CA0827-6P6This 80 mm diameter control station is designed to house up to 6 push-buttons or indicator lights, ideal for complex control operations in industrial settings.
-
IDE Combinable distribution cabinet w/o door, 1110x670x212mmVendor: IDESKU: 40ENL120-168IP40-IP65 Steel distribution cabinets (48-192 modules), IP40 COMBINABLE DISTRIBUTION CABINET 120-168 MOD.The material used is:\n\nBody, sides, top and bottom covers for surface cabinets and frames for flush-fit cabinets manufactured in cold-rolled steel EN10130+A1 with a thickness of 1,2 mm.\nBody for flush-fit cabinets manufactured in...
-
Elfin Push-button enclosure, undrilled, 152x152x100mmVendor: ElfinSKU: 040C1515-1NNew Elfin, while projecting, obviously considers all the technical aspects but also the design and the aesthetics, so as to always perfectly integrate the equipment that the enclosure will house. Moreover, there are many possibilities to customise the products according to customer’s specifications. Strong...
-
Elfin Push-button enclosure, 12 hole Ø 22, 170x205x100mmVendor: ElfinSKU: 040C1720-1EP12This aluminum push-button enclosure, measuring 170x205x100 mm, includes 12 M22 holes and is designed for harsh environments, offering IP66/IP69 protection and impact resistance (IK09).
-
Balluff BAE PS-XA-1S-24-100-103 Heartbeat® PSU, IO-linkVendor: BalluffSKU: BAE00LJThis Balluff PSU converts 90...132 VAC or 198...264 VAC input to a regulated 24VDC output at 10A rated current, with IO-Link connectivity for condition monitoring within the Heartbeat® range. It is housed in an aluminium enclosure rated IP20 and mounts on DIN rail, connecting...
