Enclosure
-
Stego Ventilation cable gland, M12 x 1.5, 8mmVendor: StegoSKU: 28410.0-00This cable gland is designed for M12 x 1.5 mounting and accommodates a cable diameter of 8mm, allowing ventilation while maintaining a secured entry point into an enclosure. It is used in control panels and enclosures where thermal management is required alongside cable entry,...
-
Stego Thermostat, 2-state regulator, NO, 0 - 60°C, 250VAC, 10AVendor: StegoSKU: 01141.0-00The mechanical thermostats KTO 011 (contact breaker) and KTS 011 (contact maker) are two state regulators used to control heaters, coolers, filter fans or signal devices. KTS 011 Thermostat (normally open); contact maker for regulating of filter fans and heat exchangers or for switching...
-
Stego Pressure compensation device plastic, unit, 2pcVendor: StegoSKU: 28400.0-00This device is a pressure compensation unit made of plastic, supplied as a pair, for use with enclosures. It allows air pressure equalisation between the interior of a control panel and the surrounding environment while maintaining protection against ingress. Typical use is on sealed...
-
Stego German schuko plug socket, type F, 16AVendor: StegoSKU: 03500.0-01The DIN rail mounted electrical socket can be quickly fitted and connected in enclosures allowing the use of auxiliary products such as hand lamps, measuring devices, soldering irons etc. The unit is available with and without fuse and in many world socket standards.\n\n\n Quickly...
-
Stego Plug socket w/o fuse, USA, 125VAC, 15AVendor: StegoSKU: 03504.0-01The DIN rail mounted electrical socket can be quickly fitted and connected in enclosures allowing the use of auxiliary products such as hand lamps, measuring devices, soldering irons etc. The unit is available with and without fuse and in many world socket standards.\n\n\n Quickly...
-
Stego Filter fan plus, airflow 'out', 230VAC, 45W, 263m³/hVendor: StegoSKU: 01882.0-00This filter fan unit extracts air from an enclosure, drawing in cooler ambient air through a separate intake point to displace warm internal air. Operating at 230VAC with a power consumption of 45W, it moves up to 263m³/h. It is typically fitted to control...
-
Stego Filter fan plus, airflow 'out', 230VAC, 95W, 727m³/hVendor: StegoSKU: 01884.0-00This filter fan unit is designed to expel air from an enclosure, drawing on a 230VAC supply and rated at 95W, with an airflow capacity of 727m³/h. It forms part of a thermal management arrangement for control panels, helping to move warm internal air...
-
Stego Filter fan plus, airflow 'out', 230VAC, 12W, 24m³/hVendor: StegoSKU: 01880.0-00This filter fan is designed to extract air from an enclosure, expelling warm internal air outwards while drawing filtered air in through a corresponding filter element elsewhere in the panel. It operates on a 230VAC supply, drawing 12W and delivering an airflow rate of...
-
IDE Distribution box, watertight, 3x18, DIN, 586x418x148Vendor: IDESKU: CDN54PTDin rail mount IP65 enclosure - Excludes Earth / Neutral Bar \nExterior dimensions (Height x Width x Depth): 586x418x148mm\nHalogen-free plastic materials. Frame and base: ABS. Suitable for outdoor use: UV protection under ISO standard 4892-2, Method A: 500h \nABS watertight distribution boxes (Sealable)
-
IDE Support and busbar PE+N for box CSN9PTVendor: IDESKU: 22001This accessory provides a support and busbar arrangement for protective earth and neutral connections within the CSN9 enclosure range. It allows PE and N conductors to be terminated and organised within the box in a fixed, orderly manner. It is typically used in control...
-
IDE Support and busbar PE+N for box CDN54PTVendor: IDESKU: 22005This accessory provides a support and busbar arrangement for protective earth (PE) and neutral (N) connections within the CDN54PT enclosure. It allows earth and neutral conductors to be terminated and organised in a fixed position inside the box. This type of component is typically...
-
IDE Support and busbar PE+N for box CSN36PTVendor: IDESKU: 22004This accessory provides a support and busbar arrangement for protective earth (PE) and neutral (N) connections within the CSN36PT enclosure. It allows conductors to be terminated and organised at a common reference point inside the box, supporting clear separation of earth and neutral circuits....
-
IDE Support and busbar PE+N for boxes CDN4PT and CDN6PTVendor: IDESKU: 22000This accessory provides a support and busbar arrangement for protective earth (PE) and neutral (N) connections within CDN4PT and CDN6PT enclosure boxes. It allows PE and N conductors to be terminated and organised at a fixed point inside the enclosure, supporting clear separation of...
-
Flexbox Enclosure, m/steel, orange, 300x400x200mmVendor: FlexboxSKU: FB3420-OThis Flexbox wall-mounted enclosure is made from durable orange steel, designed for housing electrical and control equipment. It offers a secure, IP66-rated environment, suitable for harsh industrial conditions.
-
Flexbox Enclosure, m/steel, grey, 800 x 1000 x 300mmVendor: FlexboxSKU: FB81030-GThis oversized wall mount enclosure in green finish measures 800 x 1000 x 300 mm. It offers high-level IP66 protection, suitable for housing complex control systems in harsh industrial settings.
-
Flexbox Enclosure, m/steel, Grey, 600 x 800 x 300mmVendor: FlexboxSKU: FB6830-GThis large wall mount enclosure measures 600 x 800 x 300 mm and provides IP66 protection, making it ideal for demanding environments. It is equipped with options for modular mounting, ensuring flexibility for various industrial setups.
-
Flexbox Enclosure, m/steel, grey, 400 x 500 x 200mmVendor: FlexboxSKU: FB4520-GThis wall mount enclosure, measuring 400 x 500 x 200 mm, offers IP66 protection and is designed for versatile industrial applications, with options for modular mounting and secure locking mechanisms.
-
Flexbox Enclosure, m/steel, orange, 250x300x200mmVendor: FlexboxSKU: FB25321-OThis junction box is designed to house and protect electrical connections in industrial settings. Its construction provides excellent durability and resistance to environmental factors, making it suitable for both indoor and outdoor installations.
-
Flexbox Enclosure, m/steel, orange, 200x250x150mmVendor: FlexboxSKU: FB22515-OThis control station enclosure offers a durable and secure housing for electrical controls in industrial environments. It is designed to support easy access for maintenance and setup, ensuring operational efficiency.
