Control Panel
-
Werma Electronic buzzer, continuous tone, grey, 90dB, 230VACVendor: WermaSKU: 118.068.28Minimal current consumption reduces operating costs IP 43 with cap With continuous tone
-
Werma Electronic buzzer, cont/pulse tone, 90dB, 24VAC/DCVendor: WermaSKU: 119.068.15Electric buzzer with low power consumption Low power consumption minimises operating costs IP 43 with cover cap With continuous tone or pulsating tone
-
Werma Electronic buzzer, continuous tone, 90dB, 24VAC/DCVendor: WermaSKU: 118.068.15Minimal current consumption reduces operating costs IP 43 with cap With continuous tone
-
Werma Electronic buzzer, continuous tone, grey, 90dB, 12VDCVendor: WermaSKU: 118.068.14Minimal current consumption reduces operating costs IP 43 with cap With continuous tone
-
Werma Multi-tone sounder, 8 tone, black, 230VACVendor: WermaSKU: 110.000.68High output installation multi-tone sounder for the 22.5 mm control panel/switchgear programme 8 different tones selectable Application-specific sound output setting
-
Werma LED Buzzer, continuous tone, red, 80dB, 230VACVendor: WermaSKU: 150.100.68LED continuous light with switchable continuous tone for two-stage signalling Simple connection through plug-in connection Maintenance-free long-life operation up to 50,000 hours Low power consumption for PLC control
-
Werma LED Buzzer, continuous tone, red, 80dB, 24VDCVendor: WermaSKU: 150.100.55LED continuous light with switchable continuous tone for two-stage signalling Simple connection through plug-in connection Maintenance-free long-life operation up to 50,000 hours Low power consumption for PLC control
-
Werma Multi-tone sounder, 32 tone, red, 112dB, 115 - 230VACVendor: WermaSKU: 140.150.60Multi-tone siren with adjustable tones and volume. 32 tones adjustable for various applications. Adjustable volume up to 115 dB. In the low-voltage version, 2 tones can be controlled externally.
-
Werma Electronic buzzer, continuous/pulse tone, 80dB, 230VACVendor: WermaSKU: 111.000.68Werma's Electronic buzzer EM Contin/pulse 230V DC is designed for the 22.5 mm panel and switchgear programme. For further installation ease, the connection is achieved via a plug. Positive and negative control logic. As well as a continuous or pulse tone can be triggered...
-
Werma Twinlight design signal tower, blue, 24VAC/DCVendor: WermaSKU: 634.530.75No more blind spots thanks to 360° radiation of the OmniView dome The right column for every application, thanks to DesignLOOK and ClassicLOOk Twin elements combine two light-image functions under one Article number TwinLIGHT combines LED continuous light and LED flashing light in one...
-
Werma Twinlight design signal tower, green, 24VAC/DCVendor: WermaSKU: 634.230.75No more blind spots thanks to 360° radiation of the OmniView dome The right column for every application, thanks to DesignLOOK and ClassicLOOk Twin elements combine two light-image functions under one Article number TwinLIGHT combines LED continuous light and LED flashing light in one...
-
Werma Twinlight design signal tower, red, 24VAC/DCVendor: WermaSKU: 634.130.75No more blind spots thanks to 360° radiation of the OmniView dome The right column for every application, thanks to DesignLOOK and ClassicLOOk Twin elements combine two light-image functions under one Article number TwinLIGHT combines LED continuous light and LED flashing light in one...
-
Werma Base with integrated tube, grey, Ø 70mmVendor: WermaSKU: 960.000.51This base with integrated tube forms the mounting section for a modular signal tower, providing the connection point between the mounting surface and the stacked signal elements above. The housing and grip are made from PA-GF, with a diameter of 70mm and a height...
-
Werma Terminal element for tube mounting, grey, 12-230VAC/DCVendor: WermaSKU: 640.910.00Suitable for the KombiSIGN 72 modular signal tower in DesignLOOK. Connection element for tube mounting (tube Ø 25 mm). Please order accessories separately.
-
Werma Tube, black, Ø 25mm, (H) 46mmVendor: WermaSKU: 960.000.3145mm long aluminium tube with 25mm diameter.
-
Werma Base for tube, black, Ø 70mm, (H) 31mmVendor: WermaSKU: 975.840.91Werma's Base is for tube D25mm and is manufactured out of aluminium material and the housing colour is black.
-
Werma Contact box for cable exit at side, black, Ø 70mmVendor: WermaSKU: 975.840.01This contact box provides a side cable exit for signal tower or beacon installations mounted on a Ø 70mm base. The housing and grip are constructed from PA-GF, with a black finish and a part height of 29mm. It is typically used where cable...
-
Werma Flashing light element, yellow, 230VAC, 70 x 66mmVendor: WermaSKU: 643.300.68Xenon flash element from the KombiSIGN 71 series The strobe light impresses with the intense light pulse of the xenon flash tube. Good perception due to focussing of the signal on the central area of the signal element.
-
Werma Buzzer element contin/pulse, black, 230VAC, 70x72mmVendor: WermaSKU: 645.800.68Werma's Buzzer element contin/pulse is part of the KombiSIGN 71 series. The buzzer has a sound output of 85,0 dB, and is manufactured with PC materials. The housing colour is black and has a protection rating of IP65. The diameter is 70 mm.
-
Werma LED Flashing light element, blue, 24VDC, 70 x 66mmVendor: WermaSKU: 644.520.55LED flashing element from the KombiSIGN 71 series LED strobes have a long service life and lower power consumption. current consumption. The very bright flashing of the LEDs is easy to see even in poor lighting conditions.
-
Werma LED Flashing light element, clear, 24VDC, 70x66mmVendor: WermaSKU: 644.420.55LED flashing element from the KombiSIGN 71 series LED strobes have a long service life and lower power consumption. current consumption. The very bright flashing of the LEDs is clearly visible even in poor conditions, the very bright flashing of the LEDs is easy...
-
Werma LED Flashing light element, green, 24VDC, 70 x 66mmVendor: WermaSKU: 644.220.55LED flashing element from the KombiSIGN 71 series LED strobes have a long service life and lower power consumption. current consumption. The very bright flashing of the LEDs is clearly visible even in poor conditions, the very bright flashing of the LEDs is easy...
-
Werma Indication board, complete, white, 160 x 343mmVendor: WermaSKU: 960.000.05Werma's Indication board complete is an accessory for both KombiSIGN 71 and KombiSIGN 72. The signal tower is a complete 5-way Indication board with a connection bracket and has a 70 diameter base.
-
Werma Multi-tone sounder, 42 tone, red, 120dB, 115 - 230VACVendor: WermaSKU: 142.000.68Multi-tone siren with adjustable volume and tones Loudness adjustable for specific applications up to 120 dB 42 tones for different applications 3 tones externally controllable High protection class IP 66
-
Werma Fixing bow, 3-tier, grey, 35 x 48mmVendor: WermaSKU: 975.890.35Werma's fixing bow is a 3-tier W accessory. The housing material is grey and is manufactured out of PC/ABS materials and has the protection category IP65.
-
Werma Fixing bow, 1-tier, grey, 55 x 95 x 97mmVendor: WermaSKU: 975.890.33Werma's fixing bow is a 1-tier W accessory. The housing material is grey and is manufactured out of PC/ABS materials and has the protection category IP65.
-
-
Werma Twinlight design, blue light, 24VAC/DC, 70 x 66mmVendor: WermaSKU: 647.530.75LED TwinLIGHT element suitable for KombiSIGN 72 series The TwinLIGHT light element combines two light image functions (continuous and flashing light) in one element. Blue light is produced by coloured LEDs. Suitable for the modular signal tower KombiSIGN 72 in DesignLOOK. Please order the...
-
Werma Vocal element, specific audio files, black, 24VDCVendor: WermaSKU: 645.840.55Speech output element from the KombiSIGN series Playback of customer-specific audio files (tones, melodies and self-voiced texts) Unique instructions in the respective national language possible Excellent sound and audio quality Easy data transfer and convenient operation Creation of individual playlists and playback modes possible
-
Werma Electronic buzzer, pulse tone, 80 dB, 115VAC/DCVendor: WermaSKU: 107.010.77This electronic buzzer produces a pulsed tone at 80 dB and operates on 115 VAC/DC. It is used to provide an audible signal within control panels and automation equipment, alerting operators to a machine state or fault condition. The pulse tone output distinguishes it...
-
Werma End cap, blackVendor: WermaSKU: 975.840.00This end cap is an accessory component used to close off or terminate signal tower and stack light assemblies within the Werma range. Manufactured in black polycarbonate, it is designed to fit modules with a 70 mm diameter. It is typically fitted at the...
-
Werma Buzzer/flash, continuous/pulsed tone, red, 24VAC/DCVendor: WermaSKU: 421.110.75This device combines an audible buzzer with a red flashing light in a single unit, operating on 24VAC/DC. It can be configured for continuous or pulsed tone output, providing an audible alert alongside visual signalling. Such units are typically fitted to control panels and...
-
Werma Base with integrated tube, silver, Ø 70mmVendor: WermaSKU: 960.698.03This base with integrated tube is designed for mounting signal tower or beacon components, providing a fixed connection point within a Ø70mm series. Constructed from polycarbonate, the unit has a silver housing finish and a part height of 82mm. It is typically used as...
-
Werma Adapter for single hole mount, black, 40 x 54mmVendor: WermaSKU: 630.820.00Werma's Adapter for single hole mount. EM for ease of cable entry. The adapter has a built-in mounting fixture, thus making it a great option when incorporating the adaptor into the system.
-
Werma Adapter for single hole mount, 27 x 83mmVendor: WermaSKU: 960.000.25This adapter enables single hole mounting of compatible Werma signalling components, with a part diameter of 27mm and a height of 83mm. Finished in silver, it is used where indicators or audible signal units need to be fitted to a control panel or enclosure...
-
Weidmuller Cross-connector, yellow, 32-pole, 41AVendor: WeidmullerSKU: 1733640000This cross-connector is used to link adjacent terminal blocks, providing common potential connections across a 32-pole arrangement rated at 41A. Constructed from V-0 rated flammability material, it is suitable for use in control panels requiring electrical bridging between terminals. The yellow colouring assists with...
-
Weidmuller Cross-connector, yellow, 41-pole, 32A, 6.1mmVendor: WeidmullerSKU: 1758270000This cross-connector is used to link adjacent terminal blocks, allowing common potentials to be distributed across a terminal rail without individual jumper wires. It is rated at 32A and features 41 poles at a 6.1mm pitch, suiting installations with a matching terminal spacing. The...
-
Weidmuller Feed-through terminal, dark beige, 800V, 32AVendor: WeidmullerSKU: 7904290000This feed-through terminal block is used to connect and distribute conductors within a control panel, providing a common junction point without altering the circuit. Rated at 800V and 32A, it is suited to standard industrial wiring applications where reliable terminal connections are required. The...
-
Weidmuller Feed-through terminal, blue, 800V, 32A, 4mm²Vendor: WeidmullerSKU: 1632060000This feed-through terminal block is used to connect and separate conductors within control panel wiring, providing a single point for joining cables of the same circuit. It uses a tension-clamp connection for securing conductors, rated at 800V and 32A for 4mm² cable, and is...
-
Weidmuller Partition plate, dark beige, 34.85 x 104.35 x 2mmVendor: WeidmullerSKU: 7904210000This partition plate is used to separate or organise components within terminal blocks and enclosures, providing physical segregation between adjacent sections. It measures 34.85 x 104.35 x 2mm and is rated V-0 for flammability. Typical applications include control panels and cabinets where isolation between...
-
Weidmuller Distribution block, screw, c/s 16mm², 690V, 175AVendor: WeidmullerSKU: 1939490000This distribution block provides screw-type termination for power distribution within control panels, accommodating conductors up to 16mm² across three poles. It is rated at 690V and 175A, suitable for applications requiring reliable splitting or feeding of power supply lines. Typical use is within industrial...
-
Weidmuller Cable marker carrier, transparent, 3.5 x 20 x 8mmVendor: WeidmullerSKU: 1753490000This cable marker carrier holds individual marking tags for identifying cables and conductors within a panel or wiring installation. The transparent construction allows the inserted marker to remain visible and legible once fitted. Its compact dimensions of 3.5 x 20 x 8mm suit tight...
-
Weidmuller Component terminal, screw, 1A, c/s 2.5 mm²Vendor: WeidmullerSKU: 1023400000This WDK 2.5 1D A.1 component terminal block integrates a diode for secure feed-through connections with additional functionality. Its compact design, rated for 400V and 2.5 mm² cross-section, makes it ideal for automation systems needing reliable, space-saving solutions.
-
Weidmuller End Plate, dark beige, 29.7x44x1.5mmVendor: WeidmullerSKU: 1060000000This end plate is used to terminate rows of terminal blocks on a DIN rail, providing a fixed boundary that keeps the assembly aligned and secure. Its dark beige finish suits standard panel colour schemes, and the material carries a V-0 flammability rating. It...
-
Weidmuller Test-disconnect terminal, screw, c/s 6mm²Vendor: WeidmullerSKU: 0105920000This is a screw-connection test-disconnect terminal with a cross-section rating of 6mm², used within terminal blocks in control panel wiring. It allows a circuit to be isolated and tested without removing the field wiring, providing a measurement point for commissioning and fault-finding. Such terminals...
-
Weidmuller Terminal block, pluggable, screwVendor: WeidmullerSKU: 0645060000This pluggable screw terminal block provides a disconnectable wiring connection point within a control panel, allowing conductors to be wired to the plug section and then connected to or removed from the fixed base without disturbing individual terminations. Screw clamping secures the conductors, while...
-
Weidmuller Stripping and cutting tool, 6 - 16mm²Vendor: WeidmullerSKU: 9203110000This tool is used for stripping and cutting conductors within the 6 to 16 mm² range, suited to panel building and cable preparation tasks. It has an overall width of 166 mm, making it a compact hand tool for workshop or on-site use.
-
Weidmuller Feed-through terminal, screw, bolt type, 800VVendor: WeidmullerSKU: 0448360000This ST 5/EN feed-through terminal block supports up to 16 mm² conductor cross-section and is rated at 800V and 76A, suitable for demanding electrical interfaces. With its bolt-type screw connection, it ensures stability and reliability in high-current applications.
-
Weidmuller Relay socket, push-in, 4 CO, 250VAC, 6AVendor: WeidmullerSKU: 8869430000This relay socket accepts a 4 changeover contact relay and provides push-in terminal connections rated at 250VAC and 6A, simplifying wiring in control panel assemblies. It carries an IP20 ingress protection rating and a V-0 flammability rating for the housing material. The compact footprint...
-
Weidmuller Feed-through terminal, screw, c/s 4mm²Vendor: WeidmullerSKU: 9502600000This SAKK 4 feed-through terminal block is designed for secure connections, featuring a screw connection system that supports up to 4 mm² conductor cross-sections. It operates at a rated voltage of 800V and current up to 32A, making it ideal for high-demand industrial environments...
