Schneider Circuit Breakers
-
Schneider Circuit breaker, TM-D trip unit, 3-pole, 125AVendor: Schneider ElectricSKU: ZZA-LV516332This is a 3-pole circuit breaker fitted with a TM-D thermal-magnetic trip unit, rated at 125A. It provides overcurrent and short-circuit protection for connected circuits, disconnecting supply when fault conditions are detected. Devices of this type are typically installed in distribution boards and control...
-
Schneider Circuit breaker, MA trip unit, 3-pole, 50AVendor: Schneider ElectricSKU: ZZA_LV510434This is a three-pole circuit breaker fitted with a magnetic (MA) trip unit, rated at 50A. It provides short-circuit protection by opening the circuit when current exceeds the set magnetic trip threshold, without the inverse-time delay characteristic of thermal-magnetic units. Such devices are typically...
-
Schneider Clipsal Mini circuit breaker, 1-pole, 40AVendor: Schneider ElectricSKU: S5CB140/3This miniature circuit breaker is a single-pole device rated at 40A, providing overcurrent protection for a single circuit. It is designed for installation in distribution boards and control panels, where it disconnects the circuit in the event of overload or fault conditions. Typical use...
-
Schneider Mini circuit breaker, C, 2-pole, 500VDC, 63AVendor: Schneider ElectricSKU: A9N61539This miniature circuit breaker is a 2-pole device with a C trip curve, rated for a maximum operating voltage of 500 V DC and a current rating of 63A. It provides overcurrent protection in DC circuits and is fixed-mounted within control panels. The device...
-
Schneider Circuit breaker, 2-pole, 5kA, 63AVendor: Schneider ElectricSKU: 60683This 2-pole circuit breaker provides overcurrent protection for circuits rated up to 63A, with a breaking capacity of 5kA. It is designed for installation within control panels to protect distribution circuits and connected equipment from fault conditions. The 2-pole configuration allows for the switching...
-
Schneider Circuit breaker, TM-D trip unit, 3-pole, 250AVendor: Schneider ElectricSKU: LV525303This circuit breaker uses a TM-D trip unit and is configured as a 3-pole device rated at 250A. It is designed for fixed mounting with screw connections, suited to AC systems operating at 50/60 Hz. With an IP40 rating and an operating temperature range...
-
Schneider Circuit breaker, TM-D trip unit, 3-pole, 100AVendor: Schneider ElectricSKU: LV510307This circuit breaker uses a TM-D thermal-magnetic trip unit and provides 3-pole protection at 100A for AC circuits at 50/60 Hz. It is fixed-mounted with screw connections, rated IP40, and suited to operating temperatures between -25°C and 70°C, making it appropriate for enclosed control...
-
Schneider Miniature circuit-breaker, C, 3-pole, 16AVendor: Schneider ElectricSKU: A9F79316This miniature circuit-breaker is a 3-pole device rated at 16A with a C trip curve, providing overcurrent protection for circuits within control panels. It carries an IP20 rating and is designed for fixed mounting, with single terminal connections accepting rigid or flexible conductors up...
-
Schneider Miniature circuit-breaker, D, 3-pole, 40AVendor: Schneider ElectricSKU: A9F85340This is a three-pole miniature circuit-breaker with a D curve and 40A rating, used to provide overcurrent protection within control panels and distribution boards. It is rated IP20 and suited to fixed mounting, with a single terminal connection at top or bottom accepting rigid...
-
Schneider Circuit breaker, TMD trip unit, 3-pole, 25AVendor: Schneider ElectricSKU: LV429846This is a 3-pole circuit breaker fitted with a TMD trip unit, rated at 25A. It provides thermal-magnetic protection against overload and short-circuit conditions in distribution circuits. Typical applications include protecting feeders and motor circuits within control panels and switchboards.
-
Schneider Circuit breaker, 3-pole, 16AVendor: Schneider ElectricSKU: 60689This 3-pole circuit breaker provides overcurrent protection at a 16A rating within control panel installations. It is designed to switch and protect three-phase circuits, disconnecting the supply in the event of a fault. Typical applications include protecting distribution circuits and equipment feeders within industrial...
-
Schneider Circuit breaker, 2-pole, 415V, 32AVendor: Schneider ElectricSKU: A9S60232This is a 2-pole circuit breaker rated at 32A, 415V AC 50/60Hz, intended for fixed mounting within control panels and distribution boards. It features tunnel type terminals accepting 10mm² rigid or flexible conductors, with a specified tightening torque of 1.2Nm for secure connection. The...
-
Schneider Miniature circuit-breaker, C-curve, 2-pole, 15kA, 80AVendor: Schneider ElectricSKU: A9N18457The Acti9 C120H two-pole miniature circuit breaker has a rated current of 80 A with a C curve. It offers a high breaking capacity of 15,000 A at 230-400 V AC, designed for secure AC distribution systems.
-
Schneider Circuit breaker, TMD trip unit, 3-pole, 70kA/415VAC, 100AVendor: Schneider ElectricSKU: C10H3TM100This circuit breaker from the ComPacT NSX100H range supports up to 100 A with a TMD trip unit, providing thermal-magnetic protection. It features a breaking capacity of 70 kA at 415 V AC, ideal for distribution applications.
-
Schneider Circuit breaker, 3-pole, 80AVendor: Schneider ElectricSKU: EZC100N3080This three-pole circuit breaker is rated for 80 A and features thermal-magnetic trip technology. It is suitable for distribution applications in AC and DC systems with operational voltages up to 550 V AC and 250 V DC.
-
Schneider Circuit breaker, TMD trip unit, 3-pole, 415VAC, 36kA, 200AVendor: Schneider ElectricSKU: C25F3TM200This ComPacT NSX250F circuit breaker with a TMD trip unit provides thermal-magnetic protection for distribution systems, supporting a rated current of 200 A and a breaking capacity of 36 kA at 415 V AC.
-
Schneider Miniature circuit-breaker, 2-pole, D-curve, 10kA, 63AVendor: Schneider ElectricSKU: A9F75263This Acti9 iC60N two-pole miniature circuit breaker features a rated current of 63 A and D curve, providing a 6,000 A breaking capacity at 400 V AC. It is ideal for AC and DC distribution applications with reliable thermal-magnetic protection.
-
Schneider Motor circuit breaker, magnetic, 3-pole, 4AVendor: Schneider ElectricSKU: GV2L08This motor circuit breaker is rated for 4 A with magnetic trip technology and a rotary handle for control. It supports AC networks up to 690 V and offers high breaking capacity for motor protection in industrial applications.
-
Schneider Miniature circuit-breaker, C, 1-pole, 10kA, 10AVendor: Schneider ElectricSKU: A9F77110This single-pole Acti9 iC60N miniature circuit breaker supports a 10 A rated current with a C curve, offering a 6,000 A breaking capacity at 230 V AC for secure AC and DC distribution.
-
Schneider Motor circuit breaker, 3-pole, 34 - 32AVendor: Schneider ElectricSKU: GV2P32This motor circuit breaker provides reliable protection for motors up to 22 kW at 690 V AC, with a thermal magnetic trip range of 24–32 A, suitable for industrial and commercial motor control.
