Balluff
-
Balluff BMS CS-M-S25-DX15-00 Sensor mounting accessoryVendor: BalluffSKU: BAM01YPThis bracket is a mounting accessory for securing Balluff sensors within a panel or machine assembly, with dimensions of 55 x 7.5 x 60 mm. It is used in field sensing and connectivity applications where a fixed, defined sensor position is required.Key specificationsDimensions: 55...
-
Balluff BNI EIP-508-105-Z015 Network blocks for Ethernet/IPVendor: BalluffSKU: BNI006AThis network block is an I/O Link Master for EtherNet/IP, providing connectivity between field-level I/O Link devices and the control network. It is housed in a die-cast zinc, nickel-plated enclosure rated IP67, suitable for installation directly in the field on machines and panels. The...
-
Balluff BMP 01-EL1PP21A-0064-00-P00,5-S75 Field positioning systemVendor: BalluffSKU: BMP0005This is a magnetic field positioning sensor with a measuring range of 64 mm, housed in PA 12/aluminium with an IP67 rating for protection against dust and moisture. It operates from 15...30 VDC and is rated for ambient temperatures between -25 and 85 °C,...
-
Balluff BML-M20-I40-A0-M031/021-R0 Measuring rings for encodersVendor: BalluffSKU: BML002LThis measuring ring is a component of the Balluff BML magnetic encoder system, providing the magnetic scale used for position feedback on rotating shafts. It is fitted around a shaft in conjunction with a corresponding sensor head to enable non-contact position or speed measurement....
-
Balluff BMF 405KF-PS-C-2A-EY-05 Magnetic field sensors for T-slotVendor: BalluffSKU: BMF00M1The Balluff BMF 405KF-PS-C-2A-EY-05 is a magnetic field sensors for t-slot. It operates from 10...30 VDC. The housing is rated IP67IP68IP69K and the unit is specified for -40...100 °C. Approvals: CE, UKCA, cULus, WEEE.Key specifications IP rating: IP67IP68IP69K Operating voltage: 10...30 VDC Output: PNP...
-
Balluff BML-S1C0-Q53L-M400-M0-KA02 Incremental linear encoderVendor: BalluffSKU: BML003LThis incremental linear encoder measures position feedback for motion control applications, providing an output based on the incremental principle for use in automation systems. Housed in PBT with an IP67 rating, it is suited to industrial environments where protection against dust and moisture is...
-
Balluff BMF 243K-PS-C-2A-SA2-S49-00,3 C-slot sensor PNP NOVendor: BalluffSKU: BMF00ELThis is a magnetic C-slot sensor designed for mounting directly into the slot of pneumatic cylinders to detect piston position. It provides a PNP normally open switching output with a switching frequency of 3000 Hz, operating from a 10...30 VDC supply. The PA 12...
-
Balluff BMF 10E-PS-D-2-SA1-S49 Tubular magnetic field sensorVendor: BalluffSKU: BMF001ZThe BMF 10E-PS-D-2-SA1-S49 is a tubular magnetic field sensor with a stainless steel housing and sensing surface, housed in a 10mm diameter, 32mm long body suited to compact mounting positions. It detects magnet position and provides a PNP normally open output at operating voltages...
-
Balluff BKS-S109-RT14 Field attachable, M12, male, 4-pinVendor: BalluffSKU: BCC02H9The Balluff BKS-S109-RT14 is a field-attachable M12 male connector with a 4-pin straight configuration, used for terminating cordsets on site rather than relying on pre-moulded assemblies. It accepts cable diameters between 2.9mm and 5.1mm with conductor cross sections from 0.14 to 0.34 mm², and...
-
Balluff BMF 103K-PS-C-2A-SA2-S49-00,3 Magnetic field sensorVendor: BalluffSKU: BMF001LThis magnetic field sensor detects the position of a magnetic piston within pneumatic cylinders, providing a PNP normally open switching output. The compact PBT housing measures 9 x 4.8 x 16 mm and connects via an M8x1, 3-pin male connector, suiting installation directly on...
-
Balluff BKS-S107-RT14 Field attachable, M12, female, 5-pinVendor: BalluffSKU: BCC02H8The BKS-S107-RT14 is a field-attachable M12 female connector with a 5-pin straight configuration, allowing on-site cable termination rather than the use of pre-moulded cordsets. It accepts cable diameters from 2.9mm to 5.1mm with conductor cross sections of 0.14 to 0.34 mm², and features a...
-
Balluff BIW1-A310-M0150-P1-S115 Inductive transducer systemVendor: BalluffSKU: BIW0004This inductive transducer system is designed for continuous, absolute position measurement in automation applications. Housed in anodised aluminium with an M12x1, 8-pin connector, it operates from an 18...30 VDC supply and carries an IP54 rating, suiting installation in industrial environments with ambient temperatures between...
-
Balluff BIS M-400-045-001-07-S4 HF read/write head, 13.56MHzVendor: BalluffSKU: BIS00LHThis high-frequency (13.56 MHz) processor unit is designed for industrial environments requiring robust data communication. It supports a range of data carrier types and offers dependable performance in challenging conditions. The unit is ideal for integration into larger systems for tasks such as production...
-
Balluff BIS C-122-D4/L LF data carrier, 511 byteVendor: BalluffSKU: BIS0011Product Group LF (70/455 kHz) Dimension Ø 10 x 4.5 mm Antenna type round Memory type EEPROM User data, read/write 511 Byte
-
Balluff BIS M-111-02/L HF data carrier, 2000 ByteVendor: BalluffSKU: BIS0045This high-frequency (13.56 MHz) read/write device is optimized for use in environments demanding high data integrity and fast communication. The device is equipped with advanced memory capabilities and is ideal for applications such as supply chain management, asset tracking, and process automation. Its robust...
-
Balluff BIS M-400-045-401-07-S4 HF read/write head, 13.56MHzVendor: BalluffSKU: BIS015TThis Balluff BIS M-400 unit is an HF RFID read/write head operating at 13.56 MHz, used for identifying and exchanging data with compatible RFID tags in automation systems. It can be installed either flush in metal or in a metal-free clear zone, giving flexibility...
-
Balluff BIC 1B0-ITA50-Q40KFU-SM4A4A Inductive coupler, maleVendor: BalluffSKU: BIC0070The BIC 1B0-ITA50-Q40KFU-SM4A4A is an inductive coupler with a male M12x1, 4-pin connection, forming part of Balluff's contactless connectivity range for field devices. It transmits power and data across an air gap without physical electrical contact, using an IO-Link 1.1 interface at a rated...
-
Balluff BIC 2B0-ITA50-Q40KFU-SM4A5A Inductive coupler, femaleVendor: BalluffSKU: BIC0071This inductive coupler forms the female half of a non-contact connection system, transferring power and data across an air gap without direct electrical contact. It operates on a 24VDC supply and communicates via IO-Link 1.1, connecting through an M12x1, 5-pin female interface. With an...
-
Balluff BFO D22-LAP-KB-EAK-15-02 Optical fibre sensor/amplifierVendor: BalluffSKU: BFO005UThis is a photoelectric optical fibre sensor/amplifier unit for use with fibre optic cables in industrial sensing applications. It offers a sensing range of 800 mm and an IP65 rating, allowing operation in environments with dust and moisture exposure. The unit is rated for...
-
Balluff BIC 1I22-P2A02-M18MN2-EPX07-050 Inductive couplerVendor: BalluffSKU: BIC007TThis inductive coupler is used for non-contact transmission of signals or power across a fixed air gap, without the wear associated with plug connectors. The M18 housing is nickel-plated brass with a protective coating, terminated with a 5 m PUR cable, and rated IP67...
