080 782 4266 🚚 Free shipping over R3,000
Account
Account
Wish lists
Contact Us
Need help with your purchase, guidance on the products or any general assistance, please reach out to us.
Contact us
Description
xThis M8x1 inductive sensor from Balluff detects the presence of metal targets and provides a PNP normally open switching output, with an operating voltage range of 10-30 VDC and a switching frequency of 750 Hz. Its stainless steel housing and sensing surface, combined with a PTFE coating and an IP67 rating, suit it to flush mounting in environments where contamination or washdown may occur. Connection is made via an M12x1, 3-pin, A-coded male connector, allowing straightforward integration into panels and machine wiring using standard cordsets.
Key specifications
- IP rating: IP67
- Operating voltage: 10 - 30 VDC
- Rated voltage: 24 V
- Connection: M12x1 / Male / 3-pin / A-coded
- Output: PNP normally open (NO)
- Mounting: Flush mounting
Specifications
x| IP Rating | IP67 |
| Compliance/Certifications | CE UKCA cULus WEEE / IEC 60947-5-2 |
| Material: Housing / Grip | PTFE coated / Stainless steel |
| Material: Sensing Surface / Contacts | Stainless steel |
| Size | M8x1 |
| Connection Type | M12x1 / Male / 3-pin / A-coded |
| Tightening Torque | 6 Nm ±10 % |
| Switching Output | PNP normally open (NO) |
| Switching Frequency (Hz) | 750 Hz |
| Rated Insulation Voltage | 75 VDC |
| Operating Voltage | 10 - 30 VDC |
| Rated Voltage | 24 V |
| Mounting Type | Flush mounting |
| Rated Operating Current | 200 mA |
Alternatives
x- Choosing a selection results in a full page refresh.