🚚 Free shipping over R10,000
Account
Contact Us
Need help with your purchase, guidance on the products or any general assistance, please reach out to us.
Contact us
Description
xThis inductive sensor is designed for flush mounting and offers a reliable switching distance of 1.5 mm. It features a PNP normally open (NO) output and operates within a voltage range of 10 to 30 VDC. The sensor is equipped with short-circuit and polarity reversal protection, making it suitable for use in harsh industrial environments with an IP68 rating.
Specifications
x| IP Rating | IP68 |
| Compliance/Certifications | CE cULus WEEE / IEC 60947-5-2 |
| Material: Housing / Grip | Stainless steel |
| Material: Jacket / Cover Nut | PUR |
| Material: Sensing Surface / Contacts | PBT |
| Size | M8x1 |
| Cable Length (mm) | 3mm |
| Cable Diameter (mm) | 3mm |
| Conductor Cross-section | 0.14 mm² |
| Tightening Torque | 8 Nm |
| Rated Operating Distance (mm) | 1.5mm |
| Switching Output | PNP normally open (NO) |
| Switching Frequency (Hz) | 5000 Hz |
| Rated Insulation Voltage | 250 VAC |
| Operating Voltage | 10 - 30 VDC |
| Rated Voltage | 24V |
| Mounting Type | Flush mounting |
| Rated Operating Current | 200 m |
Documents
x- Choosing a selection results in a full page refresh.