Euchner Safety Automation
-
Euchner CES-A-BBN Actuator, 42 x 25mmVendor: EuchnerSKU: 106600The CES-A-BBN is an actuator for use with Euchner CES coded-magnet safety switches, measuring 42 x 25mm. It is powered inductively via the read head, requiring no separate wiring, and is housed in a fully encapsulated reinforced thermoplastic (PBT) enclosure rated IP67. Suitable for...
-
Euchner Connecting cable with plug connector SR11, 5mVendor: EuchnerSKU: 077629The SR11 is a 5 m connecting cable terminating in an M26 x 1.5 female plug connector on one end and stripped flying leads on the other, providing 12 conductors (11+PE) with a 1 mm² cross section. It is rated at 50 V with...
-
Euchner Bolt with safety switch, 24VDCVendor: EuchnerSKU: 109358This Euchner bolt with integrated safety switch operates at 24VDC and is designed for mounting on guarded doors or movable panels within safety automation systems. It accepts approach from direction A or C and can be fitted with one safety switch, with an escape...
-
Euchner RIEGEL NZ/TZ-S1/CF Bolts with escape releaseVendor: EuchnerSKU: 079785This bolt is designed for use with Euchner NZ/TZ-S1 safety switches, providing a locking element with an integrated escape release function. It is used on machine guard doors where personnel may need to exit the guarded area from inside, allowing manual release of the...
-
Euchner CMS-M-BH IP67 Actuator switch magnetic, 36 x 26mmVendor: EuchnerSKU: 092025The Euchner CMS-M-BH IP67 is a magnetic actuator switch measuring 36 x 26mm, designed for use with coded safety switches to detect guard position. Its PPS housing and IP67 degree of protection suit installation in environments requiring protection against dust and water ingress, with...
-
Euchner Hinged actuator S, top/bottom, for safety switchVendor: EuchnerSKU: 095315This actuator is designed for use with Euchner safety switches, mounting to the hinge side of a guard door, top or bottom. It engages the switch mechanism to signal the position of a hinged guard, forming part of a safety interlocking arrangement on machine...
-
Euchner CMS-M-CA Actuator, cylindrical version, M25Vendor: EuchnerSKU: 084577The CMS-M-CA is a cylindrical actuator with M25 form, intended for use with Euchner CMS series safety switches. It functions as the coded counterpart that triggers the switch upon correct alignment and proximity, forming part of a safety interlock arrangement on guards or access...
-
Euchner Actuator for safety switch NX/TXVendor: EuchnerSKU: 079739This actuator is designed for use with Euchner NX/TX series safety switches, forming part of the switch's guard-locking or position-detection mechanism. It is fitted to a moveable guard so that the safety switch can detect the guard's position and control machine access accordingly. Typical...
-
Euchner Actuator for safety switch NX/TX, increased overtravelVendor: EuchnerSKU: 079741This actuator is designed for use with Euchner NX/TX safety switches, providing increased overtravel capability. It mounts to a moving guard or door and engages the safety switch to signal position status to the control system. Typical applications include guarding on machinery and industrial...
-
Euchner Actuator head for TP switchVendor: EuchnerSKU: 078768This actuator head forms part of the TP series safety switch assembly, designed to engage with the corresponding safety switch body to signal position or guard status. It is fitted to machine guards and access points where mechanical actuation of a safety switch is...
-
Euchner Connecting cable with plug connector M8, 8-pin, 20mVendor: EuchnerSKU: 106673This Euchner connecting cable features an M8, 8-pin plug connector with a straight cable outlet, terminating in flying leads with cable end sleeves for connection into terminals. It is rated at 36 V and 1 A, with a PUR sheath and PP conductor insulation,...
-
Euchner NM12AK-M Safety switch, hinged actuator, long housingVendor: EuchnerSKU: 084562The NM12AK-M is a safety switch from Euchner's NM series, using a hinged actuator and a long housing format. It is designed to detect the position of guards and doors on machinery, forming part of a safety interlocking circuit. Typical applications include hinged guard...
-
Euchner ESN10B050AW250LN05V-M Connection cable, PNP, NO, 5mVendor: EuchnerSKU: 088773This is a connection cable with PNP output and normally open (NO) contact configuration, terminated with a 5 metre lead length. It is used to link compatible safety switching devices to a control system, carrying the switching signal from the safety component to the...
-
Euchner ESL-IH-AR-U-R30-SA Safety system, M12, unicodeVendor: EuchnerSKU: 115320The ESL-IH-AR-U-R30-SA is a guard locking safety switch with unicode M12 connection, designed for interlocking movable guards on machinery. It operates on the closed-circuit current principle with a locking force of 5000 N, and provides one guard lock monitoring NO contact plus two positively...
-
Euchner ESH-PRO Matching hinge without safety functionVendor: EuchnerSKU: 096007This hinge forms part of the ESH-PRO series and is fitted without an integrated safety function, serving purely as a mechanical mounting hinge. It is used alongside ESH-PRO safety hinges to support guard doors or panels at points where switching or monitoring is not...
-
Euchner EGT1/4ASEM4 Single hole fixing limit switchVendor: EuchnerSKU: 033976This is a single hole fixing limit switch used to detect position or provide end-of-travel signalling within safety automation circuits. It mounts through a single hole, suiting applications where panel or machine space is limited. Typical use is on guarding and access points where...
-
Euchner Connecting cable, M23, angled, 18-pin + PE, 15mVendor: EuchnerSKU: 077020This connecting cable terminates in an M23 connector with an angled cable outlet and 18 pins plus PE, with a flying lead termination at the opposite end, and is supplied in a 15 m length. It is rated at 150 V with conductors of...
-
Euchner CES-EA-TC-KK06 Connection kit for evaluation unitsVendor: EuchnerSKU: 112630This connection kit is used with Euchner CES-EA-TC evaluation units, providing the components required to complete the wiring connection between the evaluation unit and the associated safety switch or control circuit. It forms part of the CES safety sensor system, applied in machine guarding...
-
Euchner CES-A-BDA-20 Actuator, round design, ø 20mmVendor: EuchnerSKU: 084720This is a coded actuator from Euchner's CES range, designed in a round ø20mm format for use with corresponding CES safety switches. It works together with the matching sensor to form part of a non-contact safety interlock arrangement, typically fitted to guards and access...
-
Euchner CES-A-AEA-04B Evaluation unit for 4 read headsVendor: EuchnerSKU: 072000This evaluation unit connects to four CES safety read heads, processing their signals for use in safety-related monitoring circuits. It forms part of a coded-magnet safety switch system, typically applied where multiple guard doors or access points on a machine or panel require centralised...
