Euchner Safety Automation
-
Euchner ESN083069C417 Single limit switchVendor: EuchnerSKU: 083069This is a single limit switch from Euchner's safety automation range, used to detect the position of a guard or moving part within a machine. It provides a switching signal that can be incorporated into a machine's safety or control circuit to indicate whether...
-
Euchner ESM-F-ISI-2C2 Safety relay, screw, Din rail, 24VDCVendor: EuchnerSKU: 095122This safety relay is designed for DIN rail mounting within a control panel and operates from a 24VDC supply. It is used to monitor and switch safety-related circuits, such as those connected to emergency stop devices, safety gates, or other protective equipment, forming part...
-
Euchner Safety switch w/o door monitoring contactVendor: EuchnerSKU: 091746This Euchner STP1 safety switch operates on the closed-circuit current principle, with guard locking maintained by spring force and released by applying voltage to the guard locking solenoid. It provides slow-action switching with 2 NC and 2 NO contacts, plus guard lock monitoring via...
-
Euchner TP3-537A024M Safety switch, door monitoring contactVendor: EuchnerSKU: 084336This safety switch is used for monitoring guard doors and access points on machinery, providing a contact signal that indicates whether the door is open or closed. It forms part of a safety circuit that prevents machine operation unless the guard is correctly closed....
-
Euchner TP1-538A024M-C1855, Safety SwitchVendor: EuchnerSKU: 084154This safety switch is designed for interlocking guard doors and access points on industrial machinery, preventing operation unless the guard is correctly closed. It is typically installed on machine guards and safety fencing where controlled access must be monitored as part of a wider...
-
Euchner NZ2VZ-2121E Safety switch, plug connector SR11Vendor: EuchnerSKU: 088852This is a Euchner safety switch fitted with an SR11 plug connector, used to detect the position of guards and interlock them with machine control circuits. It mounts on hinged or sliding guard doors, opening or closing the safety circuit as the guard is...
-
Euchner NZ2VZ-2131E3VSM04 Safety switch, guard lockingVendor: EuchnerSKU: 074471The Euchner NZ2VZ-2131E3VSM04 is a safety switch. It connects via 1 x Plug connector SR11 (11-pin + PE). It is specified for -25 ... +80 °C.Key specifications Connection: 1 x Plug connector SR11 (11-pin + PE) Operating temperature: -25 ... +80 °C
-
Euchner NZ1VZ-528E3VSM09-M Safety switch, guard lockingVendor: EuchnerSKU: 088045This is a guard locking safety switch used to secure movable machine guards until it is safe for them to be opened. It combines position sensing with a locking mechanism, preventing access to hazardous areas while a machine is in motion and releasing the...
-
Euchner ESH-PRO-11A-1205 Safety hinge, M12Vendor: EuchnerSKU: 095895This safety hinge switch is fitted to hinged guards to detect door position as part of a machine safety circuit, connecting via an M12 connector for straightforward panel wiring. It mounts directly on the hinge axis, allowing guard monitoring without additional actuators projecting from...
-
Euchner RPS2131PR100M Rope pull switch, pull-to-reset buttonVendor: EuchnerSKU: 094849This rope pull switch is designed for emergency stop applications along conveyors and other extended machinery lines, allowing operators to trigger a stop from any point along the pull cord. The pull-to-reset button function requires deliberate manual reset of the switch before the machine...
-
Euchner RPS3131SC175M Rope pull switch, clamping headVendor: EuchnerSKU: 088883This rope pull switch is fitted with a clamping head for connection to a pull-wire rope in emergency stop and safety applications along conveyors or extended machine lines. It provides a means of initiating a safety stop function when the rope is pulled or...
-
Euchner RGBF05D16-502-M Multiple limit switch, 16mmVendor: EuchnerSKU: 087531This is a mechanical limit switch from Euchner's RGBF series, fitted with a 16mm actuating element. It is designed to detect the position of moving machine parts and provide a corresponding electrical signal for control or safety circuits. Typical applications include monitoring guards, doors...
-
Euchner RIEGEL CET-A-C Bolt, for doors hinged left/rightVendor: EuchnerSKU: 104309This bolt is a mechanical component of the Euchner CET-A-C safety switch series, used to secure guard doors that are hinged on either the left or right side. It is fitted to the door or guard as part of the interlocking arrangement, working together...
-
Euchner CMS-R-BZB-03V Read heads design B for ESM, PVCVendor: EuchnerSKU: 097368The Euchner CMS-R-BZB-03V is a magnetic, reed-contact read head (design B) for use with ESM safety evaluation units, fitted with a 3 m PVC hard-wired cable terminated in cable end sleeves. It provides two NO contacts, each internally fused at 100 mA, with a...
-
Euchner CES-A-LCA-10V Read head, encapsulated cable, 10mVendor: EuchnerSKU: 088785This read head forms part of the Euchner CES safety switch series, used in conjunction with a coded actuator to monitor guard doors and safety gates on machinery. It is supplied with an encapsulated 10-metre cable for direct connection into the safety circuit, avoiding...
-
Euchner N01K550SVM5-M Single limit switch, ball plungerVendor: EuchnerSKU: 088624This is a single limit switch fitted with a ball plunger actuator, used to signal the position of moving guards or mechanical components within a safety automation circuit. The ball plunger design allows contact with cams or actuating surfaces from varying approach angles, making...
-
Euchner NM02VZA-M Safety switch, long housingVendor: EuchnerSKU: 084453The NM02VZA-M is a safety switch with a long-housing design from Euchner's NM series, used to detect the position of guards and doors on industrial machinery. It forms part of a safety interlock circuit, signalling the control system when a guard is open so...
-
Euchner NM02HBA-MC2069 Safety switch, lever armVendor: EuchnerSKU: 095368This is a solenoid-actuated safety switch from the NM02 series, fitted with a lever arm actuating variant for guarding applications. It is designed for mounting on machine guards and interlocking systems, where it monitors the position of a movable guard and signals the control...
-
Euchner SN02R08-552-M Multiple limit switch, 8mmVendor: EuchnerSKU: 085906The Euchner SN02R08-552-M is a multiple limit switch fitted with two snap-action switching elements, each providing a changeover contact, and a roller plunger actuator with 8 mm plunger spacing. It is rated for AC 15 (2 A, 230 V) and DC 13 (2 A,...
-
Euchner SB03R08-552-M Multiple limit switch, 8mmVendor: EuchnerSKU: 086541The Euchner SB03R08-552-M is a multiple limit switch fitted with three snap-action switching elements, each providing a changeover contact, on an 8mm plunger spacing with a slide bearing actuating element. It is housed in an anodised die-cast aluminium enclosure rated IP67, suitable for installation...
