Balluff
-
Balluff BCC M455-0000-2A-RM014-005 Receptacle, 0.25mm², 4AVendor: BalluffSKU: BCC09K0This is a field-wireable M12x1 receptacle with a straight, 5-pin, A-coded male connection, rated for conductors of 0.25mm² and a current of 4A. It is designed for on-site termination of connectivity cabling in industrial automation systems, allowing sensors or actuators to be connected at...
-
Balluff BCC M474-0000-2A-000-01X475-000 Field attachableVendor: BalluffSKU: BCC0869This field wireable connector features a straight M12x1 male connection with 4-pin, A-coded configuration, allowing on-site termination and cable assembly rather than relying on pre-moulded cordsets. It is rated for operating voltages up to 250 VDC / 250 VAC and carries an IP67 rating,...
-
Balluff BCC M474-0000-2D-000-51X475-000 Field attachableVendor: BalluffSKU: BCC03WZThe BCC M474-0000-2D-000-51X475-000 is a field attachable cordset from Balluff, terminated with an M12, male straight, 4-pole connector using screw terminals for on-site assembly. It accepts cables with an outer diameter of 5mm to 8mm and conductor cross sections of 0.14 to 0.75 mm²,...
-
Balluff BCC M435-0000-1A-000-41X475-000, Field attachable, M12Vendor: BalluffSKU: BCC06Z9This is a field-wireable M12 connector with a 5-pin, A-coded female straight connection, allowing on-site termination to cables with a diameter of 4mm to 6mm and conductor cross sections of 0.14 to 0.75 mm². The housing and grip are constructed in PA with a...
-
Balluff BCC M444-0000-2A-000-51X475-000 Field attachable, 4AVendor: BalluffSKU: BCC06ZEThis is a field-wireable connector from Balluff featuring an angled M12x1 male connection with 4-pin A-coding, allowing on-site termination and cable assembly rather than a fixed factory-moulded design. It is rated for operating voltages up to 250 VDC / 250 VAC and an ambient...
-
Balluff BCC M445-0000-2A-000-51X575-000 Field attachable, 4AVendor: BalluffSKU: BCC06ZLThis is a field-wireable M12 connector with a 5-pin, A-coded male connection in an angled body, allowing on-site termination and cable assembly for automation wiring. It is rated IP67 for sealed connections and suits operating voltages up to 125 VDC / 125 VAC, with...
-
Balluff BUS M18M1-XA-07/035-S92G Ultrasonic M12x1, 5-pinVendor: BalluffSKU: BUS004TThe most important application for linear position sensors with a rod design is in hydraulic drive units. They are exceptionally well-suited for use in hydraulic cylinders for position feedback, for molding and rolling mills, or for elevator and hoisting technology. The sensors are installed...
-
Balluff BTL7-E501-M0100-B-SA316-KA05 Magnetostrictive sensorVendor: BalluffSKU: BTL0HRJThe most important application for linear position sensors with a rod design is in hydraulic drive units. They are exceptionally well-suited for use in hydraulic cylinders for position feedback, for molding and rolling mills, or for elevator and hoisting technology. The sensors are installed...
-
Balluff BTL7-E501-M0060-B-SA316-KA05 Magnetostrictive sensorVendor: BalluffSKU: BTL0J5UThe most important application for linear position sensors with a rod design is in hydraulic drive units. They are exceptionally well-suited for use in hydraulic cylinders for position feedback, for molding and rolling mills, or for elevator and hoisting technology. The sensors are installed...
-
Balluff BTL7-E501-M0035-B-SA316-KA05 Magnetostrictive sensorVendor: BalluffSKU: BTL0HREThe most important application for linear position sensors with a rod design is in hydraulic drive units. They are exceptionally well-suited for use in hydraulic cylinders for position feedback, for molding and rolling mills, or for elevator and hoisting technology. The sensors are installed...
-
Balluff BTL7-E170-M0075-B-KA05 Magnetostrictive linear sensorVendor: BalluffSKU: BTL0704The most important application for linear position sensors with a rod design is in hydraulic drive units. They are exceptionally well-suited for use in hydraulic cylinders for position feedback, for molding and rolling mills, or for elevator and hoisting technology. The sensors are installed...
-
Balluff BSP B250-EV009-P00S2B-S4 Pressure sensor, male, 4-pinVendor: BalluffSKU: BSP00YCThe pressure sensor was developed for pressure monitoring of gases or liquids which are compatible with stainless steel, ceramic and fluoroelastomer (FKM). Depending on the device and mechanical connection, pressure sensors are suitable for various application areas.
-
Balluff BSP B010-EV009-P00S2B-S4 Pressure sensor, male, 4-pinVendor: BalluffSKU: BSP00Y4The pressure sensor was developed for pressure monitoring of gases or liquids which are compatible with stainless steel, ceramic and fluoroelastomer (FKM). Depending on the device and mechanical connection, pressure sensors are suitable for various application areas.
-
Balluff BOS R020K-PS-RX11-002-S75 Through-beam sensor, PNPVendor: BalluffSKU: BOS0212With their excellent repeatability, our through-beam sensors are ideal for positioning tasks. They detect objects regardless of their surface, colour and material. The transmitter and receiver are located in separate housings.\nHigh ranges are not a problem for the light barriers. They have a large...
-
Balluff BOS R-9 Reflector and reflective foils, squareVendor: BalluffSKU: BAM00WLThe right reflector for any environment: our round and square reflectors and reflective foils are heat- and chemical-resistant. They are suitable for red light, white light, infrared and laser applications. Balluff reflectors can be used optimally for applications with BOS sensors. You can choose...
-
Balluff BOS R-22 Reflector and reflective foils, squareVendor: BalluffSKU: BAM00UYThe right reflector for any environment: our round and square reflectors and reflective foils are heat- and chemical-resistant. They are suitable for red light, white light, infrared and laser applications. Balluff reflectors can be used optimally for applications with BOS sensors. You can choose...
-
Balluff BOS R-1 Reflector and reflective foils, squareVendor: BalluffSKU: BAM00UKThe right reflector for any environment: our round and square reflectors and reflective foils are heat- and chemical-resistant. They are suitable for red light, white light, infrared and laser applications. Balluff reflectors can be used optimally for applications with BOS sensors. You can choose...
-
Balluff BOS 6K-PU-RH11-S75 Diffuse sensor, PNP, NO/NCVendor: BalluffSKU: BOS01L3Diffuse sensors with background suppression ensure reliable detection regardless of the surface, color and material. Their scanning behavior is virtually constant, even with different reflectance levels.
-
Balluff BOS 6K-PU-PR10-S75 Retroreflective sensor, PNP NO/NCVendor: BalluffSKU: BOS01MJBalluff’s retroreflective sensor is especially easy to align thanks to generous mounting tolerances. You only need to mount one electrical device plus a reflector. Large reflectors guarantee high ranges. The light barriers detect objects regardless of their surface, color and material. A pole filter...
-
Balluff BOS 5K-PU-LX10-S75 Through-beam sensor, PNP, NOVendor: BalluffSKU: BOS01JPThis diffuse sensor with background suppression is designed for short-range object detection. It offers a reliable and accurate sensing solution for automation applications, providing resistance to ambient light and ensuring stable performance in various conditions.
