IO Module

SIMATIC S7-1500, digital input module DI 16xDC 24V HF, 16 channels in groups of 16; input delay 0.05..20 ms; Input type 3 (IEC 61131); Diagnostics, hardware interrupts: Front connector (screw terminals or pushin) to be ordered separately

This analog output module is designed for use with the SIMATIC S7-1200 system, providing 4 analog outputs with a resolution of up to 14-bit for voltage and 13-bit for current. It supports output ranges of ±10 V or 0-20 mA and includes diagnostic features...

The SIMATIC S7-1200 Signal Board SB 1232 - 6ES7232-4HA30-0XB0 from Siemens offers a cost-effective expansion of your Siemens S7-1200, With 1 +/- 10 V DC, or 0/4-20 mA analog output. The signal board SB 1232 is simply plugged into the front of the CPU.

Using the analogue input module SM 1231- 6ES7231-5ND32-0XB0 from Siemens your SIMATIC S7-1200 controller can be expanded by 4 analogue inputs. The analogue input processes signals with +/-10 V, +/-5 V, +/-2.5 V, +/-1.25 or 0-20 mA/4-20 mA, 15 bit+sign bit.

The SIMATIC S7-1200 Signal Board SB 1232 - 6ES7231-4HA30-0XB0 from Siemens offers a cost-effective expansion of your Siemens S7-1200, with 1 +/- 10 V DC, or 0/4-20 mA analog input. The signal board SB 1232 is simply plugged into the front of the CPU.

This SIMATIC S7-1200 analog input module features 8 differential inputs for voltage and current measurements. It provides 12-bit resolution with interference suppression and supports fast, precise measurements in automation systems.

Siemens SIMATIC ET 200SP is a digital output module that has 8 channels. Apart from the standard type of delivery in an individual package, selected I/O modules and BaseUnits are also available in a pack of 10 units. The pack of 10 units enables...

With the BaseUnits (BUs), the ET 200SP offers a rugged and service-friendly design with permanent wiring. No tools needed for one-handed wiring using push-in terminals.Actuation of the spring NC contacts with a standard screwdriver, with a blade width up to 3.5 mm.Outstanding access due...

SIMATIC DP, 5 terminal modules TM-E15S24-01 for ET 200S for electronic\nmodules 15 mm width, Screw terminals, 2x4 terminal connections without\nterminal access to AUX1, AUX1 continuous 5 units per packing unit\n

This ET 200S electronics module provides 8 digital inputs for 24 V DC signals. It is designed for use with 2-wire sensors and is compatible with 24 V DC power supplies. The module offers a compact design and is suitable for distributed I/O applications...

This electronics module from the ET 200S series provides 8 digital outputs with a maximum current of 0.5 A per output. It features short-circuit protection and is designed for use in industrial control systems requiring reliable digital output performance.

This digital I/O module from the SIMATIC S7-1200 series features 8 inputs and 8 relay outputs, supporting 24 V DC and relay switching of up to 2 A.

This digital output module for the SIMATIC ET 200SP offers 16 channels, each supporting 24V DC with 0.5A. It includes short-circuit diagnostics and is ideal for industrial control applications.

This digital I/O module offers 16 inputs and 16 relay outputs for the SIMATIC S7-1200 system, providing reliable switching of resistive and inductive loads at up to 2 A per output.

This digital input module for the SIMATIC ET 200SP system provides 16 inputs at 24V DC with diagnostics for wire break and supply voltage monitoring. It supports PNP wiring and fits BU type A0 base units.

This base unit from the ET 200SP series is designed with push-in terminals and no AUX terminals. It allows for the connection of 16 process terminals and is suitable for Type A0 modules.

This analog output module for the ET 200SP provides 4 current/voltage outputs with 16-bit resolution. It includes diagnostics for short circuits and wire breaks.