080 782 4266 🚚 Free shipping over R3,000
Account
Account
Wish lists
Contact Us
Need help with your purchase, guidance on the products or any general assistance, please reach out to us.
Contact us
Description
xThis M12 inductive sensor detects metal targets at a rated operating distance of 4mm and provides a PNP normally closed output for switching signals into a control system. It has a stainless steel housing with an LCP sensing face, an IP68 rating, and an M12x1 male 4-pin A-coded connector, suiting installation in washdown or harsh industrial environments. Operating from 10-30 VDC with a switching frequency of 1000 Hz, it is suited to automation panels and machinery requiring reliable position or presence detection of metallic components.
Key specifications
- IP rating: IP68
- Operating voltage: 10 - 30 VDC
- Rated voltage: 24 V
- Connection: M12x1 / Male / 4-pin / A-coded
- Output: PNP normally closed (NC)
Specifications
x| IP Rating | IP68 |
| Compliance/Certifications | cULus CE UKCA WEEE / IEC 60947-5-2 |
| Material: Housing / Grip | Stainless steel |
| Material: Sensing Surface / Contacts | LCP |
| Part Length (mm) | 65mm |
| Part Diameter (mm) | 12mm |
| Connection Type | M12x1 / Male / 4-pin / A-coded |
| Tightening Torque | 12 Nm |
| Rated Operating Distance (mm) | 4mm |
| Switching Output | PNP normally closed (NC) |
| Switching Frequency (Hz) | 1000 Hz |
| Rated Insulation Voltage | 250 VAC |
| Operating Voltage | 10 - 30 VDC |
| Rated Voltage | 24 V |
| Rated Operating Current | 200 mA |
Documents
xAlternatives
x- Choosing a selection results in a full page refresh.