Safety Automation

5m cable with Plug for establishing the connection between the switching strip and the evaluator/control system.

Sticks and seals the end caps and the cable outlet, incl. pipet\n

The sensing strips consist of two layers of rubber, one with conductive and one normal insulating rubber. A copper wire embedded in two separated layers of conductive rubber together with a resistor at the end of the sensing strip, forms a closed circuit. If...

Electrical termination of the switching strip in conjunction with a resistance evaluator.\n\nResistance - 8,2 kΩ\nProduct Line - Contact-Duo\n

Connector with 10m Cable for establishing the connection between the switching strip and the evaluator/control system

Euchner's ZS enabling switches are Ergonomic Design, Lightweight and work within a 3 position operation(clench or release operation). the enabling switches are equipped with variants with plus or minus buttons for machine jog. As well as 4-pole contact elements, the cable comes in the...

This SN04D12-502-M mechanical limit switch is designed for applications requiring high accuracy and durability. It features a chisel plunger and a snap-action switching contact with 1 NC and 1 NO configuration. The housing is made of anodized die-cast aluminum, and the device offers IP67...

The plastic-encapsulated safety switches of design NM are used for monitoring the position of safety doors and moving machine components. Every user can thus employ the optimum actuating element for his/her application. The easy adjustability of the actuator heads in 4 approach directions permits...

The plastic-encapsulated safety switches of design NM are used for monitoring the position of safety doors and moving machine components. Every user can thus employ the optimum actuating element for his/her application. The easy adjustability of the actuator heads in 4 approach directions permits...

Euchner's ZS enabling switches are Ergonomic Design, Lightweight and work within a 3 position operation(clench or release operation). the enabling switches are equipped with variants with plus or minus buttons for machine jog. As well as 4-pole contact elements, the cable comes in the...

The safety switch GP is the counterpart to safety switch TP. The entire TP and GP product family possess the same actuation head and the same actuator. As a result, either the safety switches TP (with guard locking) or GP (without guard locking) can...

The safety switch GP is the counterpart to safety switch TP. The entire TP and GP product family possess the same actuation head and the same actuator. As a result, either the safety switches TP (with guard locking) or GP (without guard locking) can...

Euchner's Evaluation unit is a 2 read head that can be connected and 2 safety outputs (relay contacts with 2 internally connected NO contacts per output). The start button and feedback loop can be connected. To further ensure ease of application of the Evaluation...

Euchner's Holding bracket for E100 enabling switch The holder with an additional cable hook for hanging a wound-up cable. It can be securely fastened to parts of the machine with a wall thickness of max. 15 mm using two screws.

Pulley set RPS-PS/V5 for rope pull switches. Pulley set consisting of rope pulley block and pulley support.

Tensioner spring for rope pull switches. Tensioner spring for tensile force 110N / 175N.

Rope set consisting of thimble and rope clamp

Eyebolt for rope pull switches. Eyebolt has a thread M8 and works cohesively as RPS series accessories.