Safety Automation
-
Euchner NM11WOK-MC2069 Safety switch, rounded plungerVendor: EuchnerSKU: 095375The plastic-encapsulated safety switches of design NM are used for monitoring the position of safety doors and moving machine components. Every user can thus employ the optimum actuating element for his/her application. The easy adjustability of the actuator heads in 4 approach directions permits...
-
Euchner ZSA2A4G10A Housing G1, 3-stage, 2 buttons, 10m cableVendor: EuchnerSKU: 070765Euchner's ZS enabling switches are Ergonomic Design, Lightweight and work within a 3 position operation(clench or release operation). the enabling switches are equipped with variants with plus or minus buttons for machine jog. As well as 4-pole contact elements, the cable comes in the...
-
Euchner GP1-528A-M Safety switch, M20 x 1.5Vendor: EuchnerSKU: 089725The safety switch GP is the counterpart to safety switch TP. The entire TP and GP product family possess the same actuation head and the same actuator. As a result, either the safety switches TP (with guard locking) or GP (without guard locking) can...
-
Euchner GP1-3131A-M Safety switch, M20 x 1.5Vendor: EuchnerSKU: 090258The safety switch GP is the counterpart to safety switch TP. The entire TP and GP product family possess the same actuation head and the same actuator. As a result, either the safety switches TP (with guard locking) or GP (without guard locking) can...
-
Euchner CES-AZ-UES-02B Evaluation unit for 2 read headsVendor: EuchnerSKU: 105140Euchner's Evaluation unit is a 2 read head that can be connected and 2 safety outputs (relay contacts with 2 internally connected NO contacts per output). The start button and feedback loop can be connected. To further ensure ease of application of the Evaluation...
-
Euchner Screw holder with cable hook for enabling switchesVendor: EuchnerSKU: 047820Euchner's Holding bracket for E100 enabling switch The holder with an additional cable hook for hanging a wound-up cable. It can be securely fastened to parts of the machine with a wall thickness of max. 15 mm using two screws.
-
-
Euchner RPS-PS/V5 Pulley set for rope pull switchesVendor: EuchnerSKU: 092501Pulley set RPS-PS/V5 for rope pull switches. Pulley set consisting of rope pulley block and pulley support.
-
Euchner RPS-W-100/175 Tensioner spring for tensile forceVendor: EuchnerSKU: 092136Tensioner spring for rope pull switches. Tensioner spring for tensile force 110N / 175N.
-
Euchner RPS-RS/V5 Rope set for rope pull switchesVendor: EuchnerSKU: 092496Rope set consisting of thimble and rope clamp
-
Euchner RPS-O-8-50/V5 Eyebolt for rope pull switches w/thread, M8Vendor: EuchnerSKU: 092495Eyebolt for rope pull switches. Eyebolt has a thread M8 and works cohesively as RPS series accessories.
-
Euchner RPS-I-3-4/100M Tensioning rope for pull switches, 100mVendor: EuchnerSKU: 092814Tensioning rope for rope pull switches. The rope with 100 m length.
-
Euchner RPS-M-3131SC175M Rope pull switch, M20x1.5, 2NC+2NOVendor: EuchnerSKU: 114983Rope pull switches RPS are emergency stop devices for protecting large, expansive machine or installation areas that cannot be protected by an enclosing housing or cover. Areas of an installation or machine can be shut down immediately from any point in the working area...
-
Euchner RPS-B-6-60/V5 Turnbuckle for rope pull switches, M6 x 60Vendor: EuchnerSKU: 092498Turnbuckle (M6 x 60) for rope pull switches.
-
Euchner RIEGEL TP-GFK Bolt for doors hinged on left/rightVendor: EuchnerSKU: 096616RIEGEL Bolt TP-GFK for safety switchesTP and GP is a Fiber glass reinforced plastic bolt for doors hinged on the right. Can be locked in the open position with padlocks. Actuator and switch bracket included.\n\nFeatures\n\nLight, compact construction\n\nEasily fitted to standard aluminum profiles and machine...
-
Euchner RIEGEL TP-C Steel bolt for doors hinged on the leftVendor: EuchnerSKU: 084432Euncher's Bolt is suitable for the series TP/GP. The bolt is manufactured out of steel and is designed with the intention of using a left hinged door. Furthermore, the bolt can be locked in an open position with padlocks and the Actuator is included.\n\nAdvantages\n\nRobust...
-
Euchner RIEGEL TP-A Steel bolt for doors hinged on the rightVendor: EuchnerSKU: 084430Euncher's Bolt is suitable for the series TP/GP. The bolt is manufactured out of steel and is designed with the intention of using a right hinged door. Furthermore, the bolt can be locked in an open position with padlocks and the Actuator is included.\n\nAdvantages\n\nRobust...
-
Euchner RIEGEL NZ-A Steel bolt For doors hinged on the rightVendor: EuchnerSKU: 057734RIEGEL Bolt NZ-A for safety switches NZ.VZ and NZ.VZ.VS is a steel bolt For doors hinged on the right. Can be locked in the open position with padlocks. Actuator and switch bracket included and Bolt is not allowed to be used in conjunction with...
-
Euchner NZ1WO-2131-M Safety switch, M20x1.5, 3NC+1NOVendor: EuchnerSKU: 089629This safety switch is equipped with a roller plunger featuring a steel roller with a 12 mm diameter. It includes two normally open contacts and operates with a slow-action switching mechanism. Designed for use in safety-critical applications, it provides IP67 protection, ensuring reliable performance...
-
Euchner RC18EF-C1825 Plug, female, straight, 19-pinVendor: EuchnerSKU: 077025Euchner's female plug RC18 straight with option C1825. Plug connector M23, straight. The number of pins: 19-pin with shield springWith 16 crimp contacts for conductor cross-section 0.25 - 0.5 mm² and 3 contacts for conductor cross-section 0.75 - 1.0 mm².
