Hebotec

Hook-and-loop tape of polypropylene in high quality can be reused hundreds of times. The tape on reel can be cut to the required length, self-extinguishing according to UL94-V2.\n\nCable bundles can be extended easily\nSelf-extinguishing design according to UL94-V2\nHook-and-loop tape on reel can be cut to...

HEBOCLIP Uno for busbar or sheet metal edge without strain relief\nSnap the HEBOCLIP Uno into place on the 10 x 3 mm busbar or sheet edge and push the cable shield into the shield clamp. A secure hold is achieved because of the special...

HEBOCLIP Uno for busbar or sheet metal edge with strain relief\nSnap the HEBOCLIP Uno into place on the 10 x 3 mm busbar or sheet edge and push the cable shield into the shield clamp. A secure hold is achieved because of the special...

\nHEBOFIX base Big for hook-and-loop tape\n\nThe base for hook-and-loop fasteners serves as installation support which prevents damage during attachment of pipes, cables and tubes. The base can be equipped, free of tools, with hook-and-loop fasteners in variable lengths.The base is available for both, direct...

HEBOFIX base self-adhesive\nThe self-adhesive base for hook-and-loop fasteners serves as a gentle installation support of lines, cables and hoses. The base can be mounted on the desired surface with the bond area. After that the base can be equipped with our hook-and-loop tape in...

M17-/M23-Mounting bracket, big\nThe mounting bracket Big for direct assembly serves as an installation help for the secure fixing of M17- and M23-connectors. Two brackets can be mounted with a M6 cylinder screw to insert the connector between the stops of the brackets. Following this...

M12-Mounting clip for direct assembly stackable\nThe Mounting clip for direct assembly serves as an installation help for the secure fixing of industrial connectors.It is available in two sizes for M8 or M12 connectors. The clip can be mounted with a cylinder screw. Following this,...

M8-/M12-Mounting clip for direct assembly stackable\nThe Mounting clip for direct assembly serves as an installation help for the secure fixing of industrial connectors.It is available in two sizes for M8 or M12 connectors. The clip can be mounted with a cylinder screw. Following this,...

Shield clamp for direct assembly\nThe shield clamp for direct assembly can be screwed directly, for example, onto the mounting plate. Simply push the cable shield into shield clamp in order to achieve secure contact.\nAdvantages\n\nDirect assembly with an M4 or M5 screw\nMounting onto a C-rail...

Shield clamp for direct assembly with strain relief\nThe shield clamp for direct assembly can be screwed directly, for example, onto the mounting plate. Simply push the cable shield into the shield clamp in order to achieve secure contact. The strain relief clamp offers the...

Shield clamp on clip foot\nThe shield clamp on clip foot can be snapped onto a 35 mm DIN rail without the use of tools. Just press the cable shield into the shield clamp to achieve a safe contact.\nAdvantages\n\nEasy, tool-free assembly\nConstant contact with cable shield...

Shield clamp on clip foot with strain relief\nThe shield clamp on clip foot can be snapped onto a 35 mm DIN rail without the use of tools. Just press the cable shield into the shield clamp to achieve a safe contact. The strain relief...