euchner
-
Euchner RPS-I-3-4/100M Tensioning rope for pull switches, 100mVendor: EuchnerSKU: 092814Tensioning rope for rope pull switches. The rope with 100 m length.
-
Euchner RPS-M-3131SC175M Rope pull switch, M20x1.5, 2NC+2NOVendor: EuchnerSKU: 114983Rope pull switches RPS are emergency stop devices for protecting large, expansive machine or installation areas that cannot be protected by an enclosing housing or cover. Areas of an installation or machine can be shut down immediately from any point in the working area...
-
Euchner RPS-M-3131SC300SFM5 Rope pull switch, pull-to-resetVendor: EuchnerSKU: 119844The RPS-M-3131SC300SFM5 is a rope pull switch with a pull-to-reset mechanism, housed in die-cast aluminium and fitted with an M12 plug connector for wiring. It is designed for use in emergency stop applications along conveyors or machine lines, where a pulled rope actuates the...
-
Euchner RPS-O-8-50/V5 Eyebolt for rope pull switches w/thread, M8Vendor: EuchnerSKU: 092495Eyebolt for rope pull switches. Eyebolt has a thread M8 and works cohesively as RPS series accessories.
-
Euchner RPS-PS/V5 Pulley set for rope pull switchesVendor: EuchnerSKU: 092501Pulley set RPS-PS/V5 for rope pull switches. Pulley set consisting of rope pulley block and pulley support.
-
Euchner RPS-RS/V5 Rope set for rope pull switchesVendor: EuchnerSKU: 092496Rope set consisting of thimble and rope clamp
-
Euchner RPS-W-100/175 Tensioner spring for tensile forceVendor: EuchnerSKU: 092136Tensioner spring for rope pull switches. Tensioner spring for tensile force 110N / 175N.
-
Euchner RPS2131PR100M Rope pull switch, pull-to-reset buttonVendor: EuchnerSKU: 094849This rope pull switch is designed for emergency stop applications along conveyors and other extended machinery lines, allowing operators to trigger a stop from any point along the pull cord. The pull-to-reset button function requires deliberate manual reset of the switch before the machine...
-
Euchner RPS2131PR300M Rope pull switch, pull-to-reset buttonVendor: EuchnerSKU: 094851Plastic housing Emergency stop device with detent mechanism as per EN ISO 13850 and EN 60947-5-5 Rope clamp for pull wire Indication of correct rope tension 3 cable entries M20 x 1.5 Switching elements with 4 switching contacts Blue reset button
-
Euchner RPS3131SC175M Rope pull switch, clamping headVendor: EuchnerSKU: 088883This rope pull switch is fitted with a clamping head for connection to a pull-wire rope in emergency stop and safety applications along conveyors or extended machine lines. It provides a means of initiating a safety stop function when the rope is pulled or...
-
Euchner Safety switch STP with door monitoring contactVendor: EuchnerSKU: 091494The STP is a solenoid-operated safety switch with guard locking, combining door position monitoring with locking status feedback in a single device. It operates on the open-circuit current principle, applying voltage to the guard locking solenoid to lock and releasing by spring force, with...
-
Euchner Safety switch w/o door monitoring contactVendor: EuchnerSKU: 091746This Euchner STP1 safety switch operates on the closed-circuit current principle, with guard locking maintained by spring force and released by applying voltage to the guard locking solenoid. It provides slow-action switching with 2 NC and 2 NO contacts, plus guard lock monitoring via...
-
Euchner Safety switch, plug connector SR11, door monitoring contactVendor: EuchnerSKU: 088204This safety switch TP3-4141A024SEM4AS1 is designed for industrial applications where secure locking is required. It features an auxiliary release on the front and supports increased horizontal overtravel. The switch operates on the closed-circuit current principle, providing reliable performance with IP67 protection.
-
Euchner SB03R08-552-M Multiple limit switch, 8mmVendor: EuchnerSKU: 086541The Euchner SB03R08-552-M is a multiple limit switch fitted with three snap-action switching elements, each providing a changeover contact, on an 8mm plunger spacing with a slide bearing actuating element. It is housed in an anodised die-cast aluminium enclosure rated IP67, suitable for installation...
-
Euchner Screw holder with cable hook for enabling switchesVendor: EuchnerSKU: 047820Euchner's Holding bracket for E100 enabling switch The holder with an additional cable hook for hanging a wound-up cable. It can be securely fastened to parts of the machine with a wall thickness of max. 15 mm using two screws.
-
Euchner SN01D558SVM5-M Single limit switch, chisel plunger, M12Vendor: EuchnerSKU: 088625This precision limit switch features a chisel plunger made of stainless steel. It operates with a snap-action switching contact, offering both NC and NO contact options. It is housed in anodized die-cast alloy and provides IP67 protection.
-
Euchner SN02D08-552-M Multiple limit switch, 8mmVendor: EuchnerSKU: 085902The Euchner SN02D08-552-M is a multiple limit switch fitted with two ES 552 snap-action switching elements, each providing one changeover contact, operated by a chisel plunger with 8 mm plunger spacing. The housing is die-cast aluminium with anodised finish, rated IP67, and contacts are...
-
Euchner SN02D12-502-M Limit Switch, 1NC + 1NO, 12mmVendor: EuchnerSKU: 082165This limit switch provides one normally closed and one normally open contact in a 12 mm housing format. It is used to detect the position or presence of moving machine parts, feeding signals into control or safety circuitry. Typical applications include machine guarding and...
-
Euchner SN02R08-552-M Multiple limit switch, 8mmVendor: EuchnerSKU: 085906The Euchner SN02R08-552-M is a multiple limit switch fitted with two snap-action switching elements, each providing a changeover contact, and a roller plunger actuator with 8 mm plunger spacing. It is rated for AC 15 (2 A, 230 V) and DC 13 (2 A,...
-
Euchner SN02R12-502-M Multiple limit switch, 1NC+1NOVendor: EuchnerSKU: 079287This mechanical position switch with a 12mm plunger spacing is ideal for industrial environments where precise actuation and reliable switching are required. The switch features a snap-action switching contact and a small flange upright housing, providing versatile application options.
