Rittal
-
Rittal TS Baying cover, top, plastic, for (D) 800mmVendor: RittalSKU: 8800.885A clip-in cover with two end caps is also available to cover the seal between two enclosures. This prevents dirt and moisture from collecting on the baying seal.
-
Rittal VX Base/plinth trim panel, side, (HD) 100 x 600mmVendor: RittalSKU: 8620.072Designed for use with VX base/plinth units, this 100 mm high stainless steel side trim panel fits enclosures with a depth of 600 mm. It offers a brushed finish and Type 4X rating for high durability.
-
Rittal VX Divider panel for (HD) 2200 x 600mmVendor: RittalSKU: 8609.207This divider panel for VX enclosures is intended for cell shielding, offering enhanced stability with a double fold design. Constructed from 1.5 mm zinc-plated sheet steel, it supports enclosures 2,200 mm high and 600 mm deep, rated at IP54.
-
Rittal TS Section for cable entry, rear for (W) 1200mmVendor: RittalSKU: 8802.125This rear section for cable entry mounts directly on the base opening of TS and TP enclosures up to 1,200 mm wide. Constructed from aluminum with a foam rubber clamp strip, it ensures secure sealing with IP 55 protection.
-
Rittal VX Base/plinth trim panel, side, (HD) 200 x 500mmVendor: RittalSKU: 8620.081This 200 mm high side trim panel for VX base/plinth systems provides additional stabilization and finishing for enclosures with a depth of 500 mm. Constructed from brushed stainless steel, it is rated up to Type 4X for demanding environments.
-
Rittal VX Base/plinth trim panel, side, (HD) 100 x 500mmVendor: RittalSKU: 8620.071This 100 mm high side trim panel, made from brushed stainless steel, provides additional stabilization and finishes off the sides of VX base/plinth units with a depth of 500 mm. It is rated up to Type 4X, ideal for robust setups.
-
Rittal VX Top mounting module for (W/D) 800 x 600mmVendor: RittalSKU: 8618.511This top-mounting module for VX enclosures acts as a cable chamber for cable infeed or busbar distribution across bayed enclosures. It includes a cover plate, offers IP55 protection, and is compatible with enclosures 800 mm wide and 600 mm deep.
-
Rittal VX Lock insert, type G, die-cast zinc, 8mm squareVendor: RittalSKU: 8618.301This 8 mm square lock insert fits VX comfort handles, designed for secure access with padlock and lock inserts. Constructed from die-cast zinc, it is compatible with VX and VX IT enclosures.
-
Rittal TS Section for cable entry, rear for (W) 1000mmVendor: RittalSKU: 8802.105This rear cable entry section mounts directly on base openings to seal gaps, allowing cables to route without large radii. It features extruded aluminum and a PU foam clamp strip, suitable for TS and TP enclosures up to 1,000 mm wide.
-
Rittal TS Section for cable entry, rear for (W) 800mmVendor: RittalSKU: 8802.085This rear cable entry section is designed for direct mounting on base openings, sealing gaps while allowing direct cable routing. Made of aluminum with a PU foam clamp strip, it is suitable for TS and TP enclosures up to 800 mm wide.
-
Rittal VX Base/plinth trim panel, side, (HD) 200 x 400mmVendor: RittalSKU: 8620.041This base/plinth side trim panel for VX enclosures is designed to finish and stabilize base/plinth units. Made from RAL 9005 sheet steel, it is 200 mm high and fits depths of 400 mm, providing a robust side cover.
-
-
Rittal TS Glazed door for TS, TS IT, SE, (WH) 600 x 2000mmVendor: RittalSKU: 8610.605Alternative to a carbon steel door or rear wall.
-
Rittal VX Divider panel for (HD) 1800 x 600mmVendor: RittalSKU: 8609.202Designed for VX enclosures, this divider panel provides cell shielding with stability-enhancing double folds. Made from 1.5 mm zinc-plated sheet steel, it is compatible with enclosures 1,800 mm high and 600 mm deep and offers IP54 protection.
-
Rittal TS Side panel, screw-fastened for (WD) 1600 x 500mmVendor: RittalSKU: 8165.235This screw-fastened side panel for TS enclosures provides automatic potential equalization, EMC protection, and IP 55 security. Made of 1.5 mm sheet steel, it is suitable for installations requiring durable enclosure protection.
-
Rittal TS Side panel, screw-fastened for (WD) 2200 x 600mmVendor: RittalSKU: 8126.235This screw-fastened side panel for TS enclosures includes enclosure panel holders with an earthing insert for potential equalization. Made of 1.5 mm sheet steel, it offers IP 55 protection and supports secure installation.
-
Rittal TS Side panel, screw-fastened for (WD) 2000 x 500mmVendor: RittalSKU: 8105.235This screw-fastened side panel for TS enclosures offers IP 55 protection and features an earthing bolt for enhanced EMC protection. Constructed from 1.5 mm sheet steel, it is suitable for secure industrial enclosures.
-
Rittal VX Single door for VX, sheet steel, 600 x 1800mmVendor: RittalSKU: 5051.095This single door for VX enclosures is constructed from sheet steel with a durable dipcoat-primed, powder-coated, and textured exterior finish in RAL 7035. It includes a complete locking rod with a 3 mm double-bit lock, suitable for enclosures measuring 600 mm in width and...
-
Rittal VX Mounting plate for VX, (W) 1200 x (D) 2000mmVendor: RittalSKU: 5051.029This robust mounting plate is crafted from zinc-plated sheet steel, measuring 1,099 mm x 1,896 mm, and fits VX enclosures. Attachment 5050.063 is required for TS installations.
-
Rittal TS Side panel, screw-fastened for (WD) 1400 x 500mmVendor: RittalSKU: 8145.235This side panel for TS enclosures is constructed from 1.5 mm sheet steel and features automatic potential equalization. With IP 55 protection, it is designed for secure industrial setups that require reliable EMC protection.
