Rittal
-
-
-
Rittal VX Divider panel for (HD) 1800 x 500mmVendor: RittalSKU: 8609.201This divider panel for VX enclosures shields individual cells and features a double fold for added stability. Constructed from zinc-plated sheet steel, it fits enclosures with a height of 1,800 mm and depth of 500 mm, providing IP54 protection.
-
-
Rittal TS Section for cable entry, rear for (W) 1600mmVendor: RittalSKU: 8802.165This rear cable entry section mounts directly on base openings of TS and TP enclosures up to 1,600 mm wide. It features extruded aluminum with a foam rubber clamp strip, offering IP 55 protection and supporting direct cable routing.
-
Rittal TS Baying cover, top, plastic, for (D) 800mmVendor: RittalSKU: 8800.885A clip-in cover with two end caps is also available to cover the seal between two enclosures. This prevents dirt and moisture from collecting on the baying seal.
-
-
-
Rittal VX Base/plinth trim panel, side, (HD) 100 x 600mmVendor: RittalSKU: 8620.072Designed for use with VX base/plinth units, this 100 mm high stainless steel side trim panel fits enclosures with a depth of 600 mm. It offers a brushed finish and Type 4X rating for high durability.
-
Rittal VX Divider panel for (HD) 2200 x 600mmVendor: RittalSKU: 8609.207This divider panel for VX enclosures is intended for cell shielding, offering enhanced stability with a double fold design. Constructed from 1.5 mm zinc-plated sheet steel, it supports enclosures 2,200 mm high and 600 mm deep, rated at IP54.
-
Rittal TS Section for cable entry, rear for (W) 1200mmVendor: RittalSKU: 8802.125This rear section for cable entry mounts directly on the base opening of TS and TP enclosures up to 1,200 mm wide. Constructed from aluminum with a foam rubber clamp strip, it ensures secure sealing with IP 55 protection.
-
Rittal VX Base/plinth trim panel, side, (HD) 200 x 500mmVendor: RittalSKU: 8620.081This 200 mm high side trim panel for VX base/plinth systems provides additional stabilization and finishing for enclosures with a depth of 500 mm. Constructed from brushed stainless steel, it is rated up to Type 4X for demanding environments.
-
Rittal VX Base/plinth trim panel, side, (HD) 100 x 500mmVendor: RittalSKU: 8620.071This 100 mm high side trim panel, made from brushed stainless steel, provides additional stabilization and finishes off the sides of VX base/plinth units with a depth of 500 mm. It is rated up to Type 4X, ideal for robust setups.
-
Rittal VX Top mounting module for (W/D) 800 x 600mmVendor: RittalSKU: 8618.511This top-mounting module for VX enclosures acts as a cable chamber for cable infeed or busbar distribution across bayed enclosures. It includes a cover plate, offers IP55 protection, and is compatible with enclosures 800 mm wide and 600 mm deep.
-
Rittal VX Lock insert, type G, die-cast zinc, 8mm squareVendor: RittalSKU: 8618.301This 8 mm square lock insert fits VX comfort handles, designed for secure access with padlock and lock inserts. Constructed from die-cast zinc, it is compatible with VX and VX IT enclosures.
-
Rittal TS Section for cable entry, rear for (W) 1000mmVendor: RittalSKU: 8802.105This rear cable entry section mounts directly on base openings to seal gaps, allowing cables to route without large radii. It features extruded aluminum and a PU foam clamp strip, suitable for TS and TP enclosures up to 1,000 mm wide.
-
Rittal TS Section for cable entry, rear for (W) 800mmVendor: RittalSKU: 8802.085This rear cable entry section is designed for direct mounting on base openings, sealing gaps while allowing direct cable routing. Made of aluminum with a PU foam clamp strip, it is suitable for TS and TP enclosures up to 800 mm wide.
-
-
Rittal VX Base/plinth trim panel, side, (HD) 200 x 400mmVendor: RittalSKU: 8620.041This base/plinth side trim panel for VX enclosures is designed to finish and stabilize base/plinth units. Made from RAL 9005 sheet steel, it is 200 mm high and fits depths of 400 mm, providing a robust side cover.
-
