Renewable Energy Collection
-
Telergon Emergency external handle, included shaft, size 0Vendor: TelergonSKU: DS-SR01This external handle, supplied with shaft, is designed for emergency operation of enclosed switching devices, size 0. It mounts externally on the enclosure, allowing manual actuation without opening the panel door. Typical use is on control panels and machine enclosures where an operator requires...
-
Telergon External manual handle, size 3/4Vendor: TelergonSKU: D5LLA31This external manual handle, size 3/4, is fitted to enclosures for direct manual operation of switching devices from outside the panel. It provides an IP65-rated interface, maintaining panel sealing integrity while allowing operator access to the control mechanism. Typical use is on industrial control...
-
Telergon Direct manual handle, size 4Vendor: TelergonSKU: D5LLI32This direct manual handle is designed for size 4 enclosures and is used to operate a disconnect switch directly from outside the panel. It is fitted to the switch shaft to allow local, on/off control without opening the enclosure door. This type of handle...
-
Telergon Cylindrical base, 1000VDC, 4A, 10 x 38mmVendor: TelergonSKU: ZE-2625102This cylindrical fuse base accommodates 10 x 38mm fuse links and is rated for 1000VDC at 4A. It is used to hold and protect cylindrical fuses within control panels and switchgear assemblies, providing a mounting point for circuit protection in DC applications. The base...
-
Telergon Changeover switch, size 0, 3-pole, 160AVendor: TelergonSKU: S5-L01603PB0S5F series changeover switches for photovoltaic installations up to 1500V DC. They are switches with a range of nominal currents from 100A to 630A. Suitable for switching between two different power sources or for isolating the load. They comply with IEC 60947-3 and are...
-
Telergon Cam changeover switch, center '0FF', 3-pole, 12AVendor: TelergonSKU: TP-001000402E1N1This cam changeover switch provides three-pole switching with a centre-off position, allowing selection between two supply or circuit states with a neutral off point in between. It is rated at 12A and carries multiple compliance markings, making it suitable for use in control panels...
-
Telergon Switch, base mounting, size 00, 2-pole, 25AVendor: TelergonSKU: ZFC25SMAH1NA4OThis is a base-mounted switch from Telergon's size 00 range, configured as a 2-pole device rated for 25 A. It is designed for direct mounting onto a panel base rather than surface or DIN-rail installation, providing isolation or switching of electrical circuits within control...
-
Telergon DC Switch disconnector, 2/4-poleVendor: TelergonSKU: ZFV25SMAH4This switch disconnector is used to manually isolate DC circuits within control panels, providing a means of disconnecting power for maintenance or safety purposes. It is available in 2-pole and 4-pole configurations, allowing selection according to the circuit arrangement required. Typical applications include power...
-
Telergon Motorized unit kit, size 1, 230VAC, 250 - 315AVendor: TelergonSKU: UM-S1A230ZThis motorized switch-disconnector provides automated switching capabilities with a 230V AC supply, designed for heavy-duty applications with high operational and mechanical endurance.
-
Telergon Motorized unit kit UM-S for switch disconnectorVendor: TelergonSKU: UM-S2A230ZThis motorized switch disconnector offers automated switching capabilities, suitable for industrial applications requiring precise remote operation. It supports various control configurations, making it adaptable for complex electrical systems.
-
Telergon Switch disconnector for DC current, size 1, 160AVendor: TelergonSKU: S6-01602ES0This 160A DC switch disconnector supports up to 1000V DC, designed for applications needing reliable isolation. It is compact and compatible with various mounting setups, making it suitable for photovoltaic and other industrial environments.
-
Telergon DC Switch-disconnector, 1000V, 400AVendor: TelergonSKU: S5-02504PR0This 250A switch disconnector provides safe and reliable load isolation for industrial applications. It operates with a 4-pole configuration, supporting high operational performance and includes safety features for effective disconnection.
-
Telergon Switch disconnector, size 1, 1500VDC, 400AVendor: TelergonSKU: S7-04002PS0This 400A switch disconnector is built for high-demand applications up to 1500V DC. It features a compact design with magnetic blow-out technology for improved arc extinction and is suitable for various industrial installations.
-
Telergon Switch disconnector, size 1, 1500VDC, 315AVendor: TelergonSKU: S7-03152PS0This 315A switch disconnector operates up to 1500V DC, designed for industrial settings requiring high current ratings. The unit is built with advanced arc-extinguishing technology for safe and efficient operation in extreme conditions.
-
Telergon DC Switch, 2-pole, 1500V, 250AVendor: TelergonSKU: S7-02502PS0This 250A switch disconnector supports DC applications up to 1500V, suitable for environments requiring high-performance and safety standards. It includes a spring mechanism for fast and reliable disconnection and is compatible with a range of mounting options.
-
Telergon DC Switch-disconnector, 2-pole, size 1, 160AVendor: TelergonSKU: S7-01602PS0This high-performance switch disconnector is rated for up to 160A and 1500V DC, making it ideal for demanding industrial applications. Its design features a patented magnetic blow-out technology for efficient arc extinction, providing enhanced safety and durability.
-
Telergon Switch disconnector, size 1, 2-pole, 1500VDC, 160AVendor: TelergonSKU: S6N0160USS0This switch disconnector provides manual isolation of two-pole circuits rated up to 1500VDC at 160A, allowing safe disconnection of power supply during maintenance or emergency shutdown. The size 1 frame suits control panel power distribution applications where DC isolation is required. It is typically...
-
Telergon Enclosed switch disconnector, size 0, 3P + N, 63AVendor: TelergonSKU: ZBK63PFLHN4A4This 4-pole, 63A front mount isolator is suitable for on-load switching up to 690VAC. It comes with a red/yellow handle offering IP66 protection, a door interlock, and padlockable feature, making it ideal for secure isolation in various electrical installations.
-
Telergon Switch, base mounting, Ø 64, yel/red, 3P + N, 80AVendor: TelergonSKU: ZBK80VZVHN4A4This 4-pole, 80A base mount isolator is designed for on-load switching up to 690VAC. It features a red/yellow handle with IP66 protection, including a door interlock and padlockable option, ensuring safe and reliable operation in industrial environments.
-
Telergon Switch, door mounting, Ø 64, yel/red, 3P + N, 40AVendor: TelergonSKU: ZBK40EHN4A4This 4-pole, 40A rear mount isolator is designed for on-load switching up to 690VAC. It features a red/yellow handle with IP66 protection, including a door interlock and padlockable option, ensuring safe and reliable operation in industrial environments.
-
Telergon Switch, base mounting, Ø 64, yel/red, 3P + N, 40AVendor: TelergonSKU: ZBK40VZVHN4A4This 4-pole, 40A base mount isolator is designed for on-load switching up to 690VAC. It features a red/yellow handle with IP66 protection, including a door interlock and padlockable option, ensuring safe and reliable operation in industrial environments.
-
Telergon Switch, Din rail, black, size 0, 3-pole, 40AVendor: TelergonSKU: ZBK40SMAH1A3This changeover switch is designed for 3-phase and 3-phase + N configurations, supporting current ratings up to 40A. It is ideal for use in circuits requiring switching between power sources or circuit isolation, such as in generator or maintenance applications. The device has an...
-
Telergon Switch, door mounting, Ø 64, yel/red, 3P + N, 25AVendor: TelergonSKU: ZBK25EHN4A4This 4-pole, 25A rear mount isolator is designed for on-load switching up to 690VAC. It features a red/yellow handle with IP66 protection, including a door interlock and padlockable option, ensuring safe and reliable operation in industrial environments.
-
Telergon Switch, base mounting, Ø 64, yel/red, 3P + N, 25AVendor: TelergonSKU: ZBK25VZVHN4A4This 4-pole, 25A base mount isolator is suitable for on-load switching up to 690VAC. It comes with a red/yellow handle offering IP66 protection, a door interlock, and padlockable feature, making it ideal for secure isolation in various electrical installations.
-
Telergon Switch, base mounting, Ø 64, yel/red, 3P + N, 20AVendor: TelergonSKU: ZBK20VZVHN4A4This is a base-mounting isolator switch with a Ø64 yellow/red actuator, configured for 3P + N connection and rated at 20A. It carries an IP66 rating, suitable for applications requiring protection against dust and water ingress, and is rated for operation up to 600...
-
Telergon Switch door mounting, Ø 64, yel/red, 3-pole, 20AVendor: TelergonSKU: ZBK20EHN4A3This 20 A switch-disconnector features a 3-pole + neutral configuration, designed for secure and efficient disconnection in industrial applications. Its compact design, high insulation voltage of 690 V, and durable construction make it suitable for use in power distribution and control systems.
-
Telergon Switch door mounting, Ø 64, black, 3-pole, 20AVendor: TelergonSKU: ZBK20EH4A3This switch-disconnector provides secure isolation for low voltage circuits up to 20A. It operates with a rated insulation voltage of 690V and an impulse withstand voltage of 6kV. Suitable for main and safety switch applications, it ensures safe disconnection in industrial settings and features...
-
Telergon Switch base mounting, Ø 64, yel/red, 3P + N, 125AVendor: TelergonSKU: ZBK125VZVHN4A4This 4-pole, 125A base mount isolator is equipped with a red/yellow handle and is designed for on-load switching up to 1000VAC. It offers IP66 protection with an external handle that includes a door interlock and padlockable feature, ensuring safety and reliability in industrial applications.
-
Telergon Switch, Din rail, yel/red, 3-pole, size 0, 125AVendor: TelergonSKU: ZBK125SMAHN1A3This 125A switch disconnector in a modular enclosure provides secure load isolation for industrial applications. It is suitable for high-demand electrical installations, with robust construction for reliable performance.
-
Telergon Switch fuse, size 00, 3-pole, 100AVendor: TelergonSKU: M1101003PBDB0This switch fuse is a size 00, 3-pole isolator rated at 100 A, designed for manual disconnection and isolation of power circuits within control panels. It accepts 3P connections and is built to IEC/EN 60947-3, with CE and EAC compliance, making it suitable for...
-
Telergon Switch, Din rail, 2-pole, size 00, 58AVendor: TelergonSKU: ZFV32SMAH1A4+2This is a two-pole isolator switch from Telergon's size 00 range, rated at 58A and designed for din rail mounting. It provides local disconnection of power within a circuit, allowing safe isolation for maintenance or emergency shutdown. Typical applications include control panels and machine...
-
Telergon Switch, base mounting, size 00, 2-pole, 32AVendor: TelergonSKU: ZFV32SMAH1A4OThis switch disconnector in the ZFV series is designed for photovoltaic and renewable energy applications, offering a compact and safe solution for load disconnection in DC circuits up to 32A.
-
Telergon Switch disconnector, 2-pole, 500V, 250AVendor: TelergonSKU: S6-02502LS0This 250A DC switch disconnector offers reliable load isolation with a robust design optimized for demanding environments. It is suited for high-current DC applications, ensuring operational safety.
-
Telergon Switch disconnector, 4-pole, 1000V, 250AVendor: TelergonSKU: S6-02502ES0This 250A DC switch disconnector is built for high-current applications, providing safe and efficient disconnection. It features a durable enclosure suitable for harsh environments and is compliant with IEC standards.
-
Telergon Switch disconnector, size 0, 6-pole, 200AVendor: TelergonSKU: S5M02006PS0This 200A switch disconnector with a 6-pole configuration is engineered for high-performance circuit isolation. It is ideal for applications needing reliable and safe disconnection under heavy loads.
-
Telergon Switch disconnector, size 1, 3P + N, 400AVendor: TelergonSKU: S5-04003NC0This 40A switch disconnector is designed for safe and reliable load isolation in industrial environments. It operates with a 3-pole configuration, ensuring effective disconnection under load and includes mounting options for flexibility.
-
Telergon Switch disconnector, size 0, 3P + N, 160AVendor: TelergonSKU: S5-01603NS0This 160A 3-pole switch disconnector is crafted for safe load isolation in industrial applications. It includes features like a base-mounted design and various safety options, supporting efficient integration into electrical installations.
-
Telergon Switch disconnector, size 4, 3P + N, 1600AVendor: TelergonSKU: S5-16003NS0This 160A switch disconnector offers high performance for industrial circuit isolation. With a 3-pole configuration, it supports safe disconnection under load and includes robust accessories for enhanced safety in demanding applications.
-
Telergon Switch disconnector, size 0, 3P + N, 125AVendor: TelergonSKU: S5-01253NS0This 125A switch disconnector is engineered for reliable performance in industrial environments. It features a 3-pole configuration and is ideal for applications requiring secure load disconnection. The unit supports various mounting options and includes standard safety accessories.
-
Telergon Switch disconnector, size 0, 3-pole, 125AVendor: TelergonSKU: S5-01253PB0This switch disconnector is a 3-pole isolator rated at 125 A, used to manually disconnect power supply to circuits or equipment within a control panel for isolation and maintenance purposes. It is a size 0 unit with a compact footprint, suiting installation where panel...
-
Telergon Changeover switch, black, size 0, 3P + N, 40AVendor: TelergonSKU: ZBK40SMAH1U4This changeover switch is a size 0, 3-pole plus neutral device rated at 40 A, used to switch a load between two power sources or supplies within a control panel. It carries an IP40 rating for basic protection against contact and ingress in enclosed...
-
Telergon Change over switch, 3-pole, 160AVendor: TelergonSKU: S5L01603PB0This switch-disconnector is suited for high-power AC applications, featuring a robust design that supports heavy load switching with reliable insulation and operational security.
-
Telergon Change over switch, size 0, 3P + N, 125AVendor: TelergonSKU: S5F01253NS0This Telergon product is a change over switch from the Changeover Switch range. Approvals: CE.
-
Telergon Change over switch, size 0, 3-pole, 125AVendor: TelergonSKU: S5F01253PS0This changeover switch provides efficient control in medium-power applications, designed for durability and equipped with auxiliary contacts for flexible integration into control panels.
-
Telergon Motorized c/o switch, 3-pole, size 0, 160AVendor: TelergonSKU: UM-C0A230ZThis changeover switch is a 3-pole, size 0 unit rated at 160 A, designed for motorized operation in changeover applications such as switching between two power sources. It is suitable for installation in control panels handling power distribution duties, with an operating temperature range...
-
Telergon External maual handle, size 0Vendor: TelergonSKU: DS-LA01This switch-disconnector is designed for high load operation with excellent disconnection insulation. It is suitable for various configurations, with options for external handles and padlock functionality.
-
Telergon External handle without shaft, size 1Vendor: TelergonSKU: DS-SA14This external handle is designed for Telergon switch-disconnectors, providing a manual interface for operating the switch from outside an enclosure. It is suitable for applications requiring external access to the switch mechanism, ensuring safe and convenient operation.
-
Telergon External handle without shaft, size 0Vendor: TelergonSKU: DS-SA03This is a direct handle for Telergon switch-disconnectors, allowing for manual operation directly on the switch mechanism. It is suitable for installations where space constraints or design considerations necessitate direct operation without an extended handle.
-
Telergon Enclosed switch disconnector, size 0, 6-pole, 25AVendor: TelergonSKU: ZBK25PFHN4A6This enclosed switch disconnector is rated for 25A and includes a 6-pole configuration within an IP66 plastic enclosure. It is suitable for secure electrical disconnection in demanding environments, with additional safety provided through padlocking options.
-
Telergon Enclosed switch disconnector, size 0, 8-pole, 40AVendor: TelergonSKU: ZBK40PFLHN4A8This switch-disconnector provides reliable power switching in enclosed settings. Rated at 40A, it includes IP66 protection, making it suitable for industrial applications requiring robust and secure disconnection capabilities.
