🚚 Free shipping over R10,000
Contact Us
Description
xThe main purpose of the contactors EasyPact TVS LC1E06-95 is to make and break currents up to 95A for motor loads and up to 120A for resistive loads up to 690V AC. This range consists of: three-pole contactors powered by voltage of 240V AC. The representative product used for the analysis is LC1E95M5N. The environmental impacts of this referenced product are representative of the impacts of the other products of the range which are developed with a similar technology. The environmental analysis was performed in conformity with ISO 14040. The products of the EasyPact TVS LC1E06-95 range do not generate environmental pollution (noise, emissions) requiring special precautionary measures in standard use and do not need special maintenance. The dissipated power depends on the conditions under which the product is implemented and used. This dissipated power is between 8.3 W and 36.6 W for the EasyPact TVS LC1E06-95 product range. It is 36.6 W for the referenced LC1E95M5N. This thermal dissipation represents less than 0,1% of the power which passes through the product.
Specifications
x| IP Rating / Detailed | IP2X conforming to IEC 60529 |
| Compliance/Certifications | IEC 60947-4-1,IEC 60947-1,IEC 60947-5-1 |
| Part Depth (mm) | 80mm |
| Part Width (mm) | 45mm |
| Part Height (mm) | 74mm |
| Connection Type | Power circuit: screw clamp terminals 1 1…4 mm² - cable stiffness: flexible with cable end,Power circuit: screw clamp terminals 2 1…2.5 mm² - cable stiffness: flexible with cable end,Power circuit: screw clamp terminals 1 1…4 mm² - cable stiffness: solid without cable end,Power circuit: screw clamp terminals 2 1…4 mm² - cable stiffness: solid without cable end,Control circuit: screw clamp terminals 1 1…4 mm² - cable stiffness: flexible without cable end,Control circuit: screw clamp terminals 2 1…4 mm² - cable stiffness: flexible without cable end,Control circuit: screw clamp terminals 1 1…4 mm² - cable stiffness: flexible with cable end,Control circuit: screw clamp terminals 2 1…2.5 mm² - cable stiffness: flexible with cable end,Control circuit: screw clamp terminals 1 1…4 mm² - cable stiffness: solid without cable end,Control circuit: screw clamp terminals 2 1…4 mm² - cable stiffness: solid without cable end |
| Rated Operating Voltage | Power circuit: <= 690 V AC 50/60 Hz |
| Current Rating | 6 A (at <55 °C) at <= 440 V AC AC-3 for power circuit,6 A (at <55 °C) at <= 440 V AC AC-3e for power circuit,20 A (at <55 °C) at <= 440 V AC AC-1 for power circuit |
| Power Consumption | in VA |
| Operating Period(Mech) | 10000000 cycles |
| Operating Period(Elec) | 1400000 cycles AC-3,150000 cycles AC-1 |
Documents
x- Choosing a selection results in a full page refresh.