Control Panel
-
Rittal SK Mounting clipsVendor: RittalSKU: 3398.152These mounting clips are intended for secure attachment within industrial setups, providing stability to installed components. Pack of 10, Weight per pack: 0.05 kg.
-
Rittal SK Display for door mountVendor: RittalSKU: 3396.548This accessory is a display unit designed for door mounting on Rittal SK enclosures. It allows status or process information to be viewed directly on the enclosure door without opening the panel. It is typically used in control panel installations where local visual indication...
-
Rittal SK Fan and filter unit, 24VDC, 255 x 255 x 25mmVendor: RittalSKU: 3240.124This fan and filter unit is designed for mounting on control panel enclosures to provide forced-air cooling and filtration, helping to manage internal temperature and limit ingress of airborne particles. It operates on a 24 V DC supply with a rated current of 0.43...
-
Rittal SK Filter dryerVendor: RittalSKU: 3397.522This filter dryer is a key component for maintaining optimal cooling system performance by filtering moisture, ensuring longevity and efficiency in refrigerant systems.
-
Rittal SK Radial fan, diameter 220mmVendor: RittalSKU: 3396.316This radial fan has a diameter of 220mm and is designed for thermal management within control panel enclosures. It is used to promote air circulation and heat dissipation, helping to maintain suitable internal temperatures for enclosed automation components. Typical applications include installation within Rittal...
-
Rittal SK DisplayVendor: RittalSKU: 3396.281This Rittal display unit is engineered to present essential system information clearly, aiding in real-time monitoring and diagnostics within industrial setups. Weight per pack: 0.229 kg.
-
Rittal SG LED steady light component, yellow, 24VADCVendor: RittalSKU: 2372.021This component is a steady LED light element for use in signal towers or indicator units, providing a yellow steady light signal at a rated operating voltage of 24 V (AC/DC). The housing is manufactured from polyamide, suitable for mounting within control panel enclosures....
-
Rittal SZ Earthing strap, M8, for Ø 25mm²Vendor: RittalSKU: 2412.325This 300 mm earthing braid features a 25 mm² cross-section and is constructed from tin-plated copper with M8 contact rings, offering effective grounding for high-frequency applications in industrial enclosures.
-
Rittal SG Acoustic component, 95 - 105dB, 24VVendor: RittalSKU: 2376.001This Rittal SG acoustic component is a 24V audible signalling device designed for mounting on or within control panel enclosures, providing an output of 95 to 105dB. It is constructed from black polyamide, suiting installation where a durable enclosure accessory is required. Typical use...
-
Schneider Circuit breaker, TM-D trip unit, 3-pole, 250AVendor: Schneider ElectricSKU: ZZA-LV525333This EasyPact CVS250F circuit breaker is designed for distribution applications, featuring a rated current of 250A and a breaking capacity of 36kA at 415VAC. It includes a thermal-magnetic trip unit (TM-D) for both overload and short-circuit protection, making it ideal for reliable circuit protection...
-
Schneider Limit switch lever, thermoplastic roller, rotaryVendor: Schneider ElectricSKU: ZCY18This component offers reliable functionality within Schneider's control systems, enhancing safety and efficiency.
-
Schneider limit switch head, metal end plungerVendor: Schneider ElectricSKU: ZCKE61This limit switch head with a spring-return metal plunger is part of the XC Standard range, compatible with Telemecanique limit switch bodies, suitable for temperatures between -25 and 70°C.
-
Schneider Harmony XB4 Guard for mushroom head, Ø40mmVendor: Schneider ElectricSKU: ZBZ1602This padlockable guard in black is designed for Ø40 mm mushroom head emergency stop buttons within the Harmony XB4 and XB5 ranges. Made of metal, it enhances safety by preventing unintended use.
-
Schneider Illuminated pushbutton head, flush, red, Ø22Vendor: Schneider ElectricSKU: ZB5AW343This red illuminated push-button head features a flush, unmarked design, ideal for control panels requiring visible status indicators with integral LED lighting for enhanced operational feedback.
-
Schneider Emergency stop head, turn to release, redVendor: Schneider ElectricSKU: ZB5AS844This emergency stop head is designed for mounting on control panels as part of an emergency stop push button assembly. It uses a turn-to-release action, requiring the operator to twist the head to reset it after activation, which prevents accidental restarting of equipment. The...
-
Schneider Light block with body/fixing collar, LED, green, 24VVendor: Schneider ElectricSKU: ZB4BVB3This complete body and light block assembly provides a steady green LED signal, operating on 24 V AC/DC, and is designed for durability in industrial environments. The metal construction with a Zamak collar and screw clamp terminals offers secure installation and reliable performance.
-
Schneider Key switch selector head, metal, black, Ø 22mmVendor: Schneider ElectricSKU: ZB4BG4This push button head is designed with a chromium-plated metal bezel, offering durability and a spring-return mechanism. The button is green and unmarked, suitable for general-purpose applications. It has a mounting diameter of 22.5 mm and provides protection conforming to IP66, IP67, IP69, and...
-
Schneider Selector switch head, 3-position, Ø 22Vendor: Schneider ElectricSKU: ZB5AD5This black selector switch head features a three-position mechanism with a spring return to center. Built for demanding applications, it provides reliable control and durability in industrial settings requiring high precision.
-
Schneider Pilot light head, metal, green, Ø22Vendor: Schneider ElectricSKU: ZB4BV03This pilot light head is compatible with BA9s bulbs, featuring a green plain lens and a robust metal bezel. With a mounting diameter of 22 mm, it is ideal for applications requiring high durability and visibility, conforming to IP66, IP67, IP69, and IP69K standards.
-
Schneider Single contact block, body/fixing collar, 1NOVendor: Schneider ElectricSKU: ZB5AZ101This single NO contact block with body and fixing collar, part of the Harmony XB5 range, ensures consistent operation and is compatible with a wide range of push-button heads.
-
Schneider Light block with body/fixing collar, blue, 1NOVendor: Schneider ElectricSKU: ZB4BW0B61This blue light block with a metal body and integral LED provides visual signaling at 24 V AC/DC with a 1 NO contact configuration. The sturdy construction makes it suitable for demanding control environments.
-
Schneider Mini circuit breaker, C-curve, 2-pole, 50AVendor: Schneider ElectricSKU: A9F64250This Acti9 iC60 2-pole, 50 A circuit breaker with a C curve supports distribution systems, providing a breaking capacity of 4500 A at 400 V AC and 10 kA at 220-240 V AC. It is suitable for DIN rail installation.
-
Rittall SK Expansion valveVendor: RittalSKU: 3398.334This expansion valve is designed for Rittal cooling units, facilitating efficient refrigerant flow and pressure control. Compact and reliable, it ensures optimized cooling performance for enclosures in demanding conditions.
-
Rittal VX Accessory bag for VXVendor: RittalSKU: 5051.134This accessory bag for VX enclosures includes essential mounting hardware for secure setup and integration of accessories. It is designed to provide additional support and organization within the enclosure.
-
Rittal SG LED steady light component, red, 24VADCVendor: RittalSKU: 2372.001This LED steady light component for signal pillars ensures 360° signal visibility with an optimized prism system. It supports modular configurations of up to five components at the same voltage, enhancing signal transmission in industrial environments. Rated at 24 V AC/DC with IP65 protection...
-
Rittal SK Radial fan, diameter 225mmVendor: RittalSKU: 3398.293This radial fan has an impeller diameter of 225 mm and is used for thermal management within control panel enclosures. It is designed to promote air circulation and assist heat dissipation for equipment mounted inside the enclosure. Typical applications include industrial control panels where...
-
Rittal Cut out as per drawingVendor: RittalSKU: MODZA-CUT_inventoryThis accessory provides a cut out produced to a customer-supplied drawing, allowing enclosure openings to be machined to the exact configuration required for a specific application. It is used where standard enclosure apertures do not suit the mounting or entry requirements of components fitted...
-
Rittal VX Base/plinth trim panel, side, (HD) 200 x 400mmVendor: RittalSKU: 8640.041This base/plinth trim panel is designed to provide side finishing for base/plinth systems, adding stability or facilitating interior configurations of bayed units. Constructed from sheet steel in RAL 9005, it can be configured with either a single 200 mm high or dual 100 mm...
-
Rittal SK Temperature sensor, blue, (L) 1000mmVendor: RittalSKU: 3397.534This temperature sensor in blue, with a 1000 mm length, is used to monitor and maintain environmental control within enclosures. It’s a lightweight and compact component, ideal for accurate temperature measurements in sensitive systems.
-
Rittal VX Side panel, screw, sheet steel, for (HD)2000x800mmVendor: RittalSKU: 8108.245This screw-fastened side panel for VX enclosures is made from 1.5 mm sheet steel, offering IP55 protection. It includes assembly parts for easy installation, supports automatic potential equalization, and provides enhanced EMC protection for industrial applications.
-
Rittal VX Cable duct for mounting plate and section, 50x80mmVendor: RittalSKU: 8800.755This cable duct with special DIN punchings is suitable for direct mounting on enclosure sections or mounting plates, offering effective cable management in industrial enclosures. Made from flame-resistant hard PVC, it includes a cover and withstands temperatures up to +60°C.
-
Rittal SZ System light LED, 1200lm, 100 - 125V, (L) 437mmVendor: RittalSKU: 2500.314This LED system light provides efficient enclosure lighting with optimal illumination and energy savings. Equipped with a motion sensor and socket, it offers adjustable light direction and distribution. Constructed with an aluminum body and polycarbonate cover, it operates at 13 W with IP20 protection....
-
Rittal AX Base/plinth corner, panel front & rear, 100x800mmVendor: RittalSKU: 2820.081This corner piece forms part of the base/plinth assembly for AX enclosures, fitting the front and rear panels at a height of 100mm and width of 800mm. It is manufactured from sheet steel and finished in black, RAL 9005, to match the enclosure. Typical...
-
Rittal SK Radial fan, diameter 220mmVendor: RittalSKU: 3396.076This radial fan has a diameter of 220mm and is intended for thermal management within control panel enclosures. It is fitted to enclosure housings to promote air movement and assist with heat dissipation for the equipment mounted inside. Radial fans of this type are...
-
Rittal SK Radial fan, diameter 190mmVendor: RittalSKU: 3396.258This radial fan with a diameter of 190 mm is designed to support ventilation in enclosures, ensuring efficient cooling and airflow management. The fan provides a robust and reliable solution for heat dissipation in industrial setups, helping maintain optimal operating temperatures.
-
Rittal SK Integrated louvres, sheet steel, 210 x 100 x 8mmVendor: RittalSKU: 2542.235This integrated louvre provides ventilation through convection and is easily retrofitted using four screws. Made from sheet steel, it is finished in RAL 7035 and designed for effective airflow in industrial enclosures.
-
Rittal VX Side panel, screw, sheet steel, for (HD)2200x600mmVendor: RittalSKU: 8126.245This side panel is a screw-fixed sheet steel accessory for Rittal VX enclosures with a height of 2200mm and depth of 600mm, finished in light grey RAL 7035. It provides an IP55-rated enclosed side surface for the enclosure frame, protecting internal components from dust...
-
Rittal VX Section for cable entry, centre, for (W) 800mmVendor: RittalSKU: 8618.801This section provides a centre cable entry point for Rittal VX enclosures with an 800mm width. Constructed from hard PVC with a PU foam seal, it allows cables to pass into the enclosure while maintaining sealing at the entry point. It is used where...
-
Rittal VX Base/plinth trim panel, side, (HD) 100 x 800mmVendor: RittalSKU: 8640.034This side trim panel, 100 mm high, completes the base/plinth unit for VX enclosures, providing additional stability and compatibility with bayed units. It is made from sheet steel with a RAL 9005 finish.
-
Rittal SK Temperature sensor, yellow, (L) 600mmVendor: RittalSKU: 3397.541This temperature sensor is used with Rittal SK thermal management equipment to monitor temperature within an enclosure. It has a lead length of 600 mm and is finished in yellow for identification. It is typically fitted inside control panels and industrial enclosures as part...
-
Powder Coating (1054000) WhiteVendor: RittalSKU: MODZA-ENCThis item is a white powder coating finish for Rittal enclosures, used to provide a surface coating on control panels and cabinets. It is supplied as an accessory within the enclosure range and is typically specified where a coated finish matching this colour is...
-
Rittal VX Base/plinth corner piece, sheet steel, 200x1000mmVendor: RittalSKU: 8620.024This base/plinth corner piece with 200 mm trim panels enhances stability for the VX enclosure series. Made from sheet steel with plastic covers, it offers IP55 protection and includes assembly parts for a secure enclosure foundation.
-
Rittal VX Lock insert, type G, die-cast zinc, 3mm double-bitVendor: RittalSKU: 8618.306This lock insert is designed for use with Rittal VX enclosure locking systems, providing a type G, 3mm double-bit engagement for compatible enclosure locks. It is manufactured from die-cast zinc for durability in panel and enclosure applications. The insert is typically used where controlled...
-
Rittal VX Base/plinth corner piece, sheet steel, 100x1000mmVendor: RittalSKU: 8640.005This corner piece forms part of the base/plinth assembly for Rittal VX enclosures, joining plinth sections at a corner to complete the enclosure base. It is constructed from sheet steel with a plastic cover, finished in Jet Black (RAL 9005), and measures 100mm high...
-
Rittal VX Bayed enclosure system VX25 BMW AG Group standardVendor: RittalSKU: 7993.122This enclosure is part of the Rittal VX25 bayed system, produced to BMW AG Group standard, with a housing constructed from sheet steel in light grey (RAL 7035). It measures 1200mm wide, 600mm deep and 2000mm high, and is supplied as a single unit....
-
Rittal VX Screws, model no. 5050.698Vendor: RittalSKU: 5051.086This side panel attachment for VX enclosures is made from sheet steel, providing a secure fit for enclosure side panels and enhancing structural stability.
-
Rittal SK Condensate evaporatorVendor: RittalSKU: 3397.721This condensate evaporator is used with Rittal SK enclosure cooling units to dispose of condensate collected during the cooling process. It is designed for installation within control panel thermal management systems, operating at a rated voltage of 400 / 460 V. It is supplied...
-
Rittal VX Section for cable entry, rear, for (W) 1000mmVendor: RittalSKU: 8618.812This rear cable entry section for VX and VX SE enclosures mounts on the gland plate and enclosure frame, providing high cable sealing. Made from hard PVC, it withstands temperatures up to +60°C.
-
Rittal VX Section for cable entry, rear, for (W) 1200mmVendor: RittalSKU: 8618.813This accessory forms a rear cable entry section for VX enclosures with a width of 1200mm, providing a defined opening for routing cables into the panel. It is constructed from hard PVC with a PU foam seal, helping to maintain enclosure sealing around cable...
