Thermal Management
Extreme climatic conditions and changes between day and night temperatures can negatively affect electrical components. Our range of energy efficient thermal management solutions ensure climate control for machines, enclosures, service racks, data centres, and other sensitive parts.
Filter
72 results
50
- 10
- 15
- 20
- 25
- 30
- 50
Best selling
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
Sort
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
-
Stego Ventilation cable gland, M12 x 1.5, 8mmVendor: StegoSKU: 28410.0-00This cable gland is designed for M12 x 1.5 mounting and accommodates a cable diameter of 8mm, allowing ventilation while maintaining a secured entry point into an enclosure. It is used in control panels and enclosures where thermal management is required alongside cable entry,...
-
Stego Thermostat, 2-state regulator, NO, 0 - 60°C, 250VAC, 10AVendor: StegoSKU: 01141.0-00The mechanical thermostats KTO 011 (contact breaker) and KTS 011 (contact maker) are two state regulators used to control heaters, coolers, filter fans or signal devices. KTS 011 Thermostat (normally open); contact maker for regulating of filter fans and heat exchangers or for switching...
-
Stego Pressure compensation device plastic, unit, 2pcVendor: StegoSKU: 28400.0-00This device is a pressure compensation unit made of plastic, supplied as a pair, for use with enclosures. It allows air pressure equalisation between the interior of a control panel and the surrounding environment while maintaining protection against ingress. Typical use is on sealed...
-
Stego German schuko plug socket, type F, 16AVendor: StegoSKU: 03500.0-01The DIN rail mounted electrical socket can be quickly fitted and connected in enclosures allowing the use of auxiliary products such as hand lamps, measuring devices, soldering irons etc. The unit is available with and without fuse and in many world socket standards.\n\n\n Quickly...
-
Stego Plug socket w/o fuse, USA, 125VAC, 15AVendor: StegoSKU: 03504.0-01The DIN rail mounted electrical socket can be quickly fitted and connected in enclosures allowing the use of auxiliary products such as hand lamps, measuring devices, soldering irons etc. The unit is available with and without fuse and in many world socket standards.\n\n\n Quickly...
-
Stego Filter fan plus, airflow 'out', 230VAC, 45W, 263m³/hVendor: StegoSKU: 01882.0-00This filter fan unit extracts air from an enclosure, drawing in cooler ambient air through a separate intake point to displace warm internal air. Operating at 230VAC with a power consumption of 45W, it moves up to 263m³/h. It is typically fitted to control...
-
Stego Filter fan plus, airflow 'out', 230VAC, 95W, 727m³/hVendor: StegoSKU: 01884.0-00This filter fan unit is designed to expel air from an enclosure, drawing on a 230VAC supply and rated at 95W, with an airflow capacity of 727m³/h. It forms part of a thermal management arrangement for control panels, helping to move warm internal air...
-
Stego Filter fan plus, airflow 'out', 230VAC, 12W, 24m³/hVendor: StegoSKU: 01880.0-00This filter fan is designed to extract air from an enclosure, expelling warm internal air outwards while drawing filtered air in through a corresponding filter element elsewhere in the panel. It operates on a 230VAC supply, drawing 12W and delivering an airflow rate of...
-
Cognex Heatsink, external, DM370/470Vendor: CognexSKU: DMA-HEATSINK-000This external heatsink is designed for use with Cognex DM370 and DM470 series devices, providing additional thermal dissipation for the unit. It mounts externally to the reader housing, supporting installations where heat build-up needs to be managed. Typical applications include machine vision and identification...
-
Rittal SK Radial fan, diameter 225mmVendor: RittalSKU: 3398.293This radial fan has an impeller diameter of 225 mm and is used for thermal management within control panel enclosures. It is designed to promote air circulation and assist heat dissipation for equipment mounted inside the enclosure. Typical applications include industrial control panels where...
-
Rittal SK Temperature sensor, yellow, (L) 600mmVendor: RittalSKU: 3397.541This temperature sensor is used with Rittal SK thermal management equipment to monitor temperature within an enclosure. It has a lead length of 600 mm and is finished in yellow for identification. It is typically fitted inside control panels and industrial enclosures as part...
-
Rittal SK Radial fan, diameter 190mmVendor: RittalSKU: 3396.646This radial fan has a diameter of 190mm and is intended for thermal management within enclosures. It is fitted to control panels to assist with air movement and heat dissipation for installed equipment. Typical use is within industrial enclosure systems where internal temperature control...
-
Rittal SK ControllerVendor: RittalSKU: 3396.666This SK 3396.666 controller is a compact unit used for monitoring and controlling industrial equipment, providing reliable performance with a weight of 1.672 kg. It is ideal for applications requiring precise control in various operational environments.
-
Rittal SK GrilleVendor: RittalSKU: 3397.529This grille is a component of Rittal's SK thermal management range for control panel enclosures. It is fitted to enclosure surfaces to support airflow as part of the enclosure's thermal management arrangement. It is supplied as a single unit for use in enclosure construction...
-
Rittal SK Fan trim panelVendor: RittalSKU: 3398.316This fan trim panel is designed to fit securely over fans, providing both protection and a polished appearance. Weight per pack: 0.5 kg.
-
Rittal SK Compressor, 400VVendor: RittalSKU: 3397.762This compressor unit forms part of the Rittal SK thermal management range for control panel enclosures, operating at a rated voltage of 400 V. It is used to provide active cooling within enclosure systems, helping maintain suitable internal temperatures for installed components. The unit...
-
Rittal SK Filter dryerVendor: RittalSKU: 3397.522This filter dryer is a key component for maintaining optimal cooling system performance by filtering moisture, ensuring longevity and efficiency in refrigerant systems.
-
Rittal SK PumpVendor: RittalSKU: 3396.093This pump forms part of Rittal's SK range of thermal management components for enclosure cooling systems. It is used to circulate coolant within enclosure-based cooling circuits, supporting temperature control of control panels and industrial enclosures. Typical application is within enclosure cooling systems where fluid...
-
Rittal SK Condensate hose, Ø 8 x 1.5mm, (L) 10mVendor: RittalSKU: 3301.608This condensate hose is used with Rittal SK thermal management units to carry away condensate formed during cooling of enclosures. It has an outer diameter of 8mm and a wall thickness of 1.5mm, supplied in a 10m length. Manufactured from transparent PVC, it is...
-
Rittal SK Radial fan, diameter 190mmVendor: RittalSKU: 3396.258This radial fan with a diameter of 190 mm is designed to support ventilation in enclosures, ensuring efficient cooling and airflow management. The fan provides a robust and reliable solution for heat dissipation in industrial setups, helping maintain optimal operating temperatures.
-
Rittal SK Radial fan, diameter 220mmVendor: RittalSKU: 3396.653This radial fan is intended for thermal management within control panel enclosures, providing air movement to assist heat dissipation from installed equipment. It is suited to enclosure applications where controlled airflow is required to help maintain acceptable internal operating conditions. The unit is supplied...
-
Rittal SK Radial fan, diameter 220mmVendor: RittalSKU: 3396.316This radial fan has a diameter of 220mm and is designed for thermal management within control panel enclosures. It is used to promote air circulation and heat dissipation, helping to maintain suitable internal temperatures for enclosed automation components. Typical applications include installation within Rittal...
-
Rittal SK Condensate evaporatorVendor: RittalSKU: 3397.721This condensate evaporator is used with Rittal SK enclosure cooling units to dispose of condensate collected during the cooling process. It is designed for installation within control panel thermal management systems, operating at a rated voltage of 400 / 460 V. It is supplied...
-
Rittal SK Filter dryerVendor: RittalSKU: 3397.733This filter dryer is designed to remove moisture and contaminants from refrigerant, ensuring optimal performance and longevity of cooling systems. Weight per pack: 0.645 kg.
-
Rittal SK Temperature sensor, blue, (L) 1000mmVendor: RittalSKU: 3397.534This temperature sensor in blue, with a 1000 mm length, is used to monitor and maintain environmental control within enclosures. It’s a lightweight and compact component, ideal for accurate temperature measurements in sensitive systems.
-
Rittal SK Fan and filter unit, 24VDC, 255 x 255 x 25mmVendor: RittalSKU: 3240.124This fan and filter unit is designed for mounting on control panel enclosures to provide forced-air cooling and filtration, helping to manage internal temperature and limit ingress of airborne particles. It operates on a 24 V DC supply with a rated current of 0.43...
-
Rittal SK Fan and filter unit, 24VDC, 148.5 x 148.5mmVendor: RittalSKU: 3238.124This fan and filter unit is designed for mounting on control panel enclosures to provide forced-air cooling and filtration. It operates from a 24VDC supply with a rated current of 0.32A, and is rated IP54 with the chopped-fibre filter, or IP56 when combined with...
-
Rittal SK Fan and filter unit, 24VDC, 116.5 x 116.5 x 16mmVendor: RittalSKU: 3237.124This compact TopTherm fan-and-filter unit with DC operation supports 24V voltage, offering 20 m³/h of airflow. Designed for efficient enclosure cooling, it includes a chopped-fiber filter mat and IP54 protection, ideal for wall-mounted setups in confined spaces.
-
Rittal SK Temperature sensor, white, (L) 1000mVendor: RittalSKU: 3397.546This temperature sensor from Rittal is used to monitor thermal conditions within control panels and enclosures as part of a wider thermal management setup. It is finished in white and supplied with a lead length of 1000mm, allowing it to be positioned at a...
-
Rittal SK DisplayVendor: RittalSKU: 3396.667This display component provides essential system data for effective cooling system management, allowing operators to monitor operational status easily. With a weight of 0.232 kg, it integrates seamlessly into industrial control environments, enhancing operational oversight and efficiency.
-
Rittal SK DisplayVendor: RittalSKU: 3398.337This SK Display forms part of Rittal's thermal management range for control panel enclosures. It provides a visual indication for enclosure climate control equipment, allowing engineers to monitor thermal conditions within the panel. It is typically fitted to industrial enclosures where temperature status needs...
-
Rittal SK ControllerVendor: RittalSKU: 3396.279The SK Controller is a thermal management device used for monitoring conditions within control panel enclosures. It forms part of Rittal's enclosure climate control offering, supplied as a single unit for integration into panel builds.
-
Rittal SK ControllerVendor: RittalSKU: 3396.278This Rittal controller supports complex control requirements in industrial systems, ensuring precise regulation and adaptability in various applications. Weight per pack: 1.643 kg.
-
Rittal SK ControllerVendor: RittalSKU: 3396.277The SK Controller is a thermal management device used for temperature control within industrial enclosures. It is fitted to control panels to help maintain stable internal conditions for the equipment housed inside. This makes it suitable for use in enclosure applications where thermal regulation...
-
Rittal SK Condensate hose, Ø 12 x 2mm, (L) 10mVendor: RittalSKU: 3301.612This condensate hose is used to drain condensate away from cooling units fitted to industrial enclosures. Made from transparent PVC, it measures 12 x 2mm and is supplied in a 10m length. It is typically routed from the cooling unit outlet to a suitable...
-
Rittal SK GrilleVendor: RittalSKU: 3397.531This grille supports airflow and provides a protective barrier for cooling units. Compact and reliable, it fits well within industrial enclosure cooling systems.
-
Rittal SK Filter dryerVendor: RittalSKU: 3397.048This grille is designed for use in cooling systems, providing protective covering while allowing airflow. Lightweight and durable, it fits seamlessly into enclosure setups.
-
Rittal SK Radial fan, diameter 220mmVendor: RittalSKU: 3396.076This radial fan has a diameter of 220mm and is intended for thermal management within control panel enclosures. It is fitted to enclosure housings to promote air movement and assist with heat dissipation for the equipment mounted inside. Radial fans of this type are...
-
Rittal SK Radial fan, diameter 133mmVendor: RittalSKU: 3396.266This radial fan, with a diameter of 133 mm, provides efficient airflow in compact enclosures. It is lightweight and suitable for use in ventilation setups.
-
Rittal SK Radial fan, diameter 133mmVendor: RittalSKU: 3396.265This Rittal radial fan, with a 133 mm diameter, is suitable for cooling systems that require efficient air movement, maintaining temperature stability within enclosures. Weight per pack: 1.039 kg.
-
Rittal SK Radial fan, diameter 133mmVendor: RittalSKU: 3396.644This filter dryer is essential for maintaining optimal cooling unit performance by removing moisture from refrigerant systems, ensuring long-term functionality.
-
Rittal SK CompressorVendor: RittalSKU: 3397.495This compressor is designed for efficient cooling performance in industrial enclosures. It includes assembly parts for easy installation and reliable operation.
-
Rittal SK Fan and filter unit, 24VDC, 255 x 255 x 25mmVendor: RittalSKU: 3241.124This fan-and-filter unit with diagonal fan technology is powered by a DC motor, offering a maximum air throughput of 225 m³/h. It ensures stable pressure and even airflow, providing reliable cooling for industrial enclosures. The unit includes a chopped-fiber filter mat and offers IP54...
-
Rittal SK ControllerVendor: RittalSKU: 3396.275This Rittal controller is designed for precise regulation of system operations, offering control and automation for various industrial processes. Weight per pack: 0.393 kg.
-
Rittal SK Temperature sensor, red, (L) 150mmVendor: RittalSKU: 3397.536This red temperature sensor, 150 mm in length, provides reliable temperature monitoring for enclosure cooling systems, supporting effective temperature management.
-
Rittal SK Temperature sensor, blue, (L) 600mmVendor: RittalSKU: 3397.533This blue temperature sensor with a length of 600 mm monitors temperature levels, ensuring precise control in industrial cooling systems. It is designed for compatibility with Rittal systems.
-
Linkwell Plastic finger guard for fansVendor: LinkwellSKU: PFG80This finger guard fits over 80 mm fans to prevent contact with rotating blades, providing an IP20 level of protection against finger ingress. It is moulded from UL 94V-0 rated plastic in black. Typical use is on panel-mounted cooling fans within industrial enclosures where...
-
Linkwell Busbar distribution block, 182x50x85Vendor: LinkwellSKU: UK-415This busbar distribution block provides a compact means of splitting incoming supply to multiple outgoing circuits within a control panel enclosure. Measuring 182x50x85, it is designed for mounting within panel builds where distribution of power to several devices or subcircuits is required. It is...
-
Linkwell Fan and filter, panel mount, IP54, 325x325, 240VAC Air flow rate free blowing 380m3/hVendor: LinkwellSKU: FK5527.230This fan and filter unit from the FK5527 series operates at 230V AC and offers a higher airflow rate than the FK5526 series, making it suitable for larger enclosures requiring enhanced ventilation.
-
Linkwell Fan and filter, panel mount, IP54, 325x325, 230VAC Air flow rate free blowing 550m3/hVendor: LinkwellSKU: FK5526.230This fan and filter unit from the FK5526 series operates at 230V AC, providing an airflow rate of approximately 500/560 m³/h. It is designed for efficient ventilation of electrical enclosures.