Safety Automation

This SN04D12-502-M mechanical limit switch is designed for applications requiring high accuracy and durability. It features a chisel plunger and a snap-action switching contact with 1 NC and 1 NO configuration. The housing is made of anodized die-cast aluminum, and the device offers IP67...

The plastic-encapsulated safety switches of design NM are used for monitoring the position of safety doors and moving machine components. Every user can thus employ the optimum actuating element for his/her application. The easy adjustability of the actuator heads in 4 approach directions permits...

The plastic-encapsulated safety switches of design NM are used for monitoring the position of safety doors and moving machine components. Every user can thus employ the optimum actuating element for his/her application. The easy adjustability of the actuator heads in 4 approach directions permits...

Euchner's ZS enabling switches are Ergonomic Design, Lightweight and work within a 3 position operation(clench or release operation). the enabling switches are equipped with variants with plus or minus buttons for machine jog. As well as 4-pole contact elements, the cable comes in the...

The safety switch GP is the counterpart to safety switch TP. The entire TP and GP product family possess the same actuation head and the same actuator. As a result, either the safety switches TP (with guard locking) or GP (without guard locking) can...

The safety switch GP is the counterpart to safety switch TP. The entire TP and GP product family possess the same actuation head and the same actuator. As a result, either the safety switches TP (with guard locking) or GP (without guard locking) can...

Euchner's Evaluation unit is a 2 read head that can be connected and 2 safety outputs (relay contacts with 2 internally connected NO contacts per output). The start button and feedback loop can be connected. To further ensure ease of application of the Evaluation...

Euchner's Holding bracket for E100 enabling switch The holder with an additional cable hook for hanging a wound-up cable. It can be securely fastened to parts of the machine with a wall thickness of max. 15 mm using two screws.

Pulley set RPS-PS/V5 for rope pull switches. Pulley set consisting of rope pulley block and pulley support.

Tensioner spring for rope pull switches. Tensioner spring for tensile force 110N / 175N.

Rope set consisting of thimble and rope clamp

Eyebolt for rope pull switches. Eyebolt has a thread M8 and works cohesively as RPS series accessories.

Tensioning rope for rope pull switches. The rope with 100 m length.

Rope pull switches RPS are emergency stop devices for protecting large, expansive machine or installation areas that cannot be protected by an enclosing housing or cover. Areas of an installation or machine can be shut down immediately from any point in the working area...

Turnbuckle (M6 x 60) for rope pull switches.

RIEGEL Bolt TP-GFK for safety switchesTP and GP is a Fiber glass reinforced plastic bolt for doors hinged on the right. Can be locked in the open position with padlocks. Actuator and switch bracket included.\n\nFeatures\n\nLight, compact construction\n\nEasily fitted to standard aluminum profiles and machine...

Euncher's Bolt is suitable for the series TP/GP. The bolt is manufactured out of steel and is designed with the intention of using a left hinged door. Furthermore, the bolt can be locked in an open position with padlocks and the Actuator is included.\n\nAdvantages\n\nRobust...

Euncher's Bolt is suitable for the series TP/GP. The bolt is manufactured out of steel and is designed with the intention of using a right hinged door. Furthermore, the bolt can be locked in an open position with padlocks and the Actuator is included.\n\nAdvantages\n\nRobust...

RIEGEL Bolt NZ-A for safety switches NZ.VZ and NZ.VZ.VS is a steel bolt For doors hinged on the right. Can be locked in the open position with padlocks. Actuator and switch bracket included and Bolt is not allowed to be used in conjunction with...