Products
-
Euchner RIEGEL TP-A Steel bolt for doors hinged on the rightVendor: EuchnerSKU: 084430Euncher's Bolt is suitable for the series TP/GP. The bolt is manufactured out of steel and is designed with the intention of using a right hinged door. Furthermore, the bolt can be locked in an open position with padlocks and the Actuator is included.\n\nAdvantages\n\nRobust...
-
Euchner RIEGEL TP-C Steel bolt for doors hinged on the leftVendor: EuchnerSKU: 084432Euncher's Bolt is suitable for the series TP/GP. The bolt is manufactured out of steel and is designed with the intention of using a left hinged door. Furthermore, the bolt can be locked in an open position with padlocks and the Actuator is included.\n\nAdvantages\n\nRobust...
-
Euchner RIEGEL TP-GFK Bolt for doors hinged on left/rightVendor: EuchnerSKU: 096616RIEGEL Bolt TP-GFK for safety switchesTP and GP is a Fiber glass reinforced plastic bolt for doors hinged on the right. Can be locked in the open position with padlocks. Actuator and switch bracket included.\n\nFeatures\n\nLight, compact construction\n\nEasily fitted to standard aluminum profiles and machine...
-
Euchner RIEGEL TZ-A Bolt for safety switch TZ, doors hinged on rightVendor: EuchnerSKU: 057736This bolt actuator is specifically designed for safety switches on right-hinged doors. It features a robust construction with an integrated lockout bar, allowing the bolt to be locked in the open position with padlocks. This design enhances safety by preventing unintended closure in industrial...
-
Euchner RPS-B-6-60/V5 Turnbuckle for rope pull switches, M6 x 60Vendor: EuchnerSKU: 092498Turnbuckle (M6 x 60) for rope pull switches.
-
Euchner RPS-I-3-4/100M Tensioning rope for pull switches, 100mVendor: EuchnerSKU: 092814Tensioning rope for rope pull switches. The rope with 100 m length.
-
Euchner RPS-M-3131SC175M Rope pull switch, M20x1.5, 2NC+2NOVendor: EuchnerSKU: 114983Rope pull switches RPS are emergency stop devices for protecting large, expansive machine or installation areas that cannot be protected by an enclosing housing or cover. Areas of an installation or machine can be shut down immediately from any point in the working area...
-
-
Euchner RPS-O-8-50/V5 Eyebolt for rope pull switches w/thread, M8Vendor: EuchnerSKU: 092495Eyebolt for rope pull switches. Eyebolt has a thread M8 and works cohesively as RPS series accessories.
-
Euchner RPS-PS/V5 Pulley set for rope pull switchesVendor: EuchnerSKU: 092501Pulley set RPS-PS/V5 for rope pull switches. Pulley set consisting of rope pulley block and pulley support.
-
Euchner RPS-RS/V5 Rope set for rope pull switchesVendor: EuchnerSKU: 092496Rope set consisting of thimble and rope clamp
-
Euchner RPS-W-100/175 Tensioner spring for tensile forceVendor: EuchnerSKU: 092136Tensioner spring for rope pull switches. Tensioner spring for tensile force 110N / 175N.
-
-
Euchner RPS2131PR300M Rope pull switch, pull-to-reset buttonVendor: EuchnerSKU: 094851Plastic housing Emergency stop device with detent mechanism as per EN ISO 13850 and EN 60947-5-5 Rope clamp for pull wire Indication of correct rope tension 3 cable entries M20 x 1.5 Switching elements with 4 switching contacts Blue reset button
-
-
-
-
Euchner Safety switch, plug connector SR11, door monitoring contactVendor: EuchnerSKU: 088204This safety switch TP3-4141A024SEM4AS1 is designed for industrial applications where secure locking is required. It features an auxiliary release on the front and supports increased horizontal overtravel. The switch operates on the closed-circuit current principle, providing reliable performance with IP67 protection.
-
-
Euchner Screw holder with cable hook for enabling switchesVendor: EuchnerSKU: 047820Euchner's Holding bracket for E100 enabling switch The holder with an additional cable hook for hanging a wound-up cable. It can be securely fastened to parts of the machine with a wall thickness of max. 15 mm using two screws.
