080 782 4266 🚚 Free shipping over R3,000
Account
Account
Wish lists
Contact Us
Need help with your purchase, guidance on the products or any general assistance, please reach out to us.
Contact us
Description
xThis fault contact is a fixed, DIN rail mounted auxiliary contact with a single changeover (1 c/o) configuration, rated for 24-130VDC. It is designed to signal fault conditions within control panel circuits, connecting via bottom clamp terminals suitable for rigid cable up to 2.5 mm². The unit operates across a temperature range of -25 to 50 °C and complies with EN/IEC 60947-5-1 and EN 62019-2, making it suitable for use in industrial automation panels requiring compact, panel-mounted signalling devices.
Key specifications
- Connection: Clamp terminal (bottom) 1 cable(s) 2.5 mm² (AWG 14) - rigid,Clamp terminal (bottom) 2 cable(s) 1.5 mm² (AWG 16) - rigid
- Operating temperature: -25…50 °C
- Mounting: Fixed
Specifications
x| Compliance/Certifications | EN/IEC 60947-5-1,EN 62019-2 |
| Temperature: Operating | -25…50 °C |
| Part Depth (mm) | 73.5mm |
| Part Width (mm) | 9mm |
| Part Length (mm) | 9mm |
| Part Height (mm) | 85mm |
| Tightening Torque (N.m) | 1 Nm |
| Connection Type | Clamp terminal (bottom) 1 cable(s) 2.5 mm² (AWG 14) - rigid,Clamp terminal (bottom) 2 cable(s) 1.5 mm² (AWG 16) - rigid |
| Mounting Type | Fixed |
Documents
xAlternatives
x- Choosing a selection results in a full page refresh.