Rittal
-
Rittal VX Base/plinth trim panel, side, (HD) 100 x 400mmVendor: RittalSKU: 8640.031For side blanking of a base/plinth unit and additional stability, or the interior installation of bayed base/plinths. One 200 mm high or two 100 mm high trim panels can optionally be fitted on 200 mm high base/plinths.
-
Rittal VX Side panel, screw, sheet steel, for (HD)2000x500mmVendor: RittalSKU: 8105.245This side panel, compatible with VX enclosures, is screw-fastened and made from 1.5 mm sheet steel. It provides easy one-person assembly with enhanced EMC protection and IP 55 rating.
-
Rittal VX Section for cable entry, rear, for (W) 800mmVendor: RittalSKU: 8618.811This rear section for cable entry fits onto the enclosure frame and gland plate, offering easy cable installation with full-surface support and effective sealing for secure electrical setups.
-
Rittal VX Base/plinth corner piece, sheet steel, 200x800mmVendor: RittalSKU: 8640.023This base/plinth corner piece with front and rear trim panels is made from heavy-duty sheet steel. It provides large openings for screw fastening and is suitable for industrial enclosures. The unit is 200 mm high and compatible with VX and TS systems.
-
Rittal VX Base/plinth trim panel, side, (HD) 200 x 600mmVendor: RittalSKU: 8640.043This 200 mm high base/plinth trim panel is designed to finish off base/plinth units at the sides. It provides additional stability and is made from sheet steel. The panel is suitable for use with 200 mm high base/plinths and enclosures with a depth of...
-
Rittal VX Base/plinth corner piece, sheet steel, 200x600mmVendor: RittalSKU: 8640.022This base/plinth corner piece includes trim panels for the front and rear, designed for heavy-duty enclosures. The unit provides self-positioning and large access points for fastening screws. It is 200 mm high and is suitable for VX, VX IT, VX SE, and other enclosure...
-
Rittal VX Base/plinth corner piece, sheet steel, 200x1200mmVendor: RittalSKU: 8640.025This base/plinth corner piece with trim panels is designed for industrial enclosures, providing a high load capacity. It includes corner pieces and trim panels for the front and rear, with a height of 200 mm. The unit is suitable for VX, TS, and TP...
-
Rittal VX Base/plinth corner piece, sheet steel, 100x800mmVendor: RittalSKU: 8640.003This base/plinth corner piece with trim panels is designed for heavy-duty enclosures, providing a high load capacity. It includes four corner pieces, corner covers, and trim panels for the front and rear. The unit is 100 mm high and suitable for VX, TS, TE,...
-
Rittal SZ Rail for EMC rail and stain relief for (W) 1200mmVendor: RittalSKU: 2388.125This rail is designed for fitting within Rittal SZ enclosures to provide an EMC earthing rail and strain relief for cabling, sized for 1200mm wide enclosures. It is manufactured from extruded aluminium section, giving a stable mounting point for cable management and screening connections...
-
Rittal VX Base/plinth corner piece, sheet steel, 100x600mmVendor: RittalSKU: 8640.002This base/plinth corner piece is designed for industrial enclosures and includes front and rear trim panels. The unit offers a 100 mm height and self-positioning installation. It is suitable for VX, VX IT, and other enclosure systems, providing high load capacity and stability.
-
Rittal VX Base/plinth trim panel, side, (HD) 100 x 600mmVendor: RittalSKU: 8640.033This base/plinth side trim panel is designed to finish off base/plinth units and provide additional stability. It is made from sheet steel and can be used for interior configuration of bayed base/plinths. The panel is 100 mm high and suitable for enclosures with a...
-
Rittal VX Base/plinth corner piece, sheet steel, 100x1200mmVendor: RittalSKU: 8640.007This base/plinth corner piece with trim panels is designed for VX, VX IT, VX SE, TE, TS, and TP enclosures. It features heavy-duty construction and self-positioning for easy installation. The package includes four base/plinth corner pieces, corner covers, and trim panels for the front...
-
Rittal VX Side panel, screw, sheet steel, for (HD)1800x500mmVendor: RittalSKU: 8185.245This side panel is a screw-fixed accessory for Rittal VX enclosures with a height and depth of 1800 x 500mm. Constructed from sheet steel and finished in light grey (RAL 7035), it is used to close off the sides of an enclosure assembly. It...
-
Rittal CM Cable clamp rail C-sect for mounting plate 800mmVendor: RittalSKU: 5001.081This Rittal cable clamp rail provides strain relief for cable entries, designed for mounting plates in VX, TS, and TP enclosures. It offers three installation configurations and is made from zinc-plated carbon steel.
-
Rittal VX Baying enclosure system, steel, 1200x1600x500mmVendor: RittalSKU: 8265.000This enclosure is part of Rittal's VX baying system, constructed from sheet steel and finished in light grey (RAL 7035). It measures 1200x1600x500mm and is designed for baying with adjacent enclosures to form larger control panel installations. It is typically used as a housing...
-
Rittal VX Baying enclosure system, steel, 800x2000x800mmVendor: RittalSKU: 8808.000This is a Rittal VX baying enclosure with dimensions of 800 x 2000 x 800mm, constructed from sheet steel and finished in light grey (RAL 7035). Baying enclosures of this type are designed to be joined side by side, forming extended enclosure suites for...
-
Rittal VX Baying enclosure system, steel, 600x2200x600mmVendor: RittalSKU: 8626.000The Rittal VX is a baying enclosure system. It is supplied in light grey.Key specificationsColour: Light Grey
-
Rittal VX Baying enclosure system, steel, 600x2000x800mmVendor: RittalSKU: 8608.000The Rittal VX is a baying enclosure system. It is supplied in light grey.Key specificationsColour: Light Grey
-
Rittal VX Baying enclosure system, steel, 1200x2200x600mmVendor: RittalSKU: 8226.000This baying enclosure system is constructed from steel and designed for joining multiple enclosures together into a single, continuous panel arrangement. Measuring 1200x2200x600mm, it provides a large internal footprint suited to housing extensive automation and control equipment. Baying construction of this type is typically...
-
Rittal SK Cooling unit Blue e, wall mount, 1.6kW, 230VVendor: RittalSKU: 3305.504This NEMA 4X Blue e wall-mounted unit delivers 1.6 kW cooling output, with advanced e-comfort controller, ideal for corrosive environments due to its stainless steel build.
