Rittal

This screw-fastened side panel for TS enclosures offers IP 55 protection and features an earthing bolt for enhanced EMC protection. Constructed from 1.5 mm sheet steel, it is suitable for secure industrial enclosures.

This screw-fastened side panel for TS enclosures includes enclosure panel holders with an earthing insert for potential equalization. Made of 1.5 mm sheet steel, it offers IP 55 protection and supports secure installation.

This accessory bag for VX enclosures includes essential mounting hardware for secure setup and integration of accessories. It is designed to provide additional support and organization within the enclosure.

Base/plinth corner pieces with molded self-positioning to the bayed enclosure system, for use with or without trim panels depending on the application. Large openings in the base/plinth corner piece for best access to the screw-fastening point can be covered using bay and corner covers.

This base/plinth corner piece with trim panels is designed for VX, VX IT, VX SE, TE, TS, and TP enclosures. It features heavy-duty construction and self-positioning for easy installation. The package includes four base/plinth corner pieces, corner covers, and trim panels for the front...

This base/plinth corner piece is designed for industrial enclosures and includes front and rear trim panels. The unit offers a 100 mm height and self-positioning installation. It is suitable for VX, VX IT, and other enclosure systems, providing high load capacity and stability.

This base/plinth corner piece with trim panels is designed for heavy-duty enclosures, providing a high load capacity. It includes four corner pieces, corner covers, and trim panels for the front and rear. The unit is 100 mm high and suitable for VX, TS, TE,...

This base/plinth corner piece with 200 mm trim panels enhances stability for the VX enclosure series. Made from sheet steel with plastic covers, it offers IP55 protection and includes assembly parts for a secure enclosure foundation.

This base/plinth corner piece with trim panels is designed for industrial enclosures, providing a high load capacity. It includes corner pieces and trim panels for the front and rear, with a height of 200 mm. The unit is suitable for VX, TS, and TP...

This base/plinth corner piece includes trim panels for the front and rear, designed for heavy-duty enclosures. The unit provides self-positioning and large access points for fastening screws. It is 200 mm high and is suitable for VX, VX IT, VX SE, and other enclosure...

This base/plinth corner piece with front and rear trim panels is made from heavy-duty sheet steel. It provides large openings for screw fastening and is suitable for industrial enclosures. The unit is 200 mm high and compatible with VX and TS systems.

Base/plinth corner pieces with molded self-positioning to the bayed enclosure system, for use with or without trim panels depending on the application. Large openings in the base/plinth corner piece for best access to the screw-fastening point can be covered using bay and corner covers.

Base/plinth trim panels are used depth-wise for laterally closing a base/plinth unit. The trim panel can be used in between two bayed enclosures to stabilize the base/plinth corner pieces. The 100 mm high trim panels can also be used and combined in 200 mm...

For side blanking of a base/plinth unit and additional stability, or the interior installation of bayed base/plinths. One 200 mm high or two 100 mm high trim panels can optionally be fitted on 200 mm high base/plinths.

This 100 mm high side trim panel, made from brushed stainless steel, provides additional stabilization and finishes off the sides of VX base/plinth units with a depth of 500 mm. It is rated up to Type 4X, ideal for robust setups.

This base/plinth side trim panel is designed to finish off base/plinth units and provide additional stability. It is made from sheet steel and can be used for interior configuration of bayed base/plinths. The panel is 100 mm high and suitable for enclosures with a...

Designed for use with VX base/plinth units, this 100 mm high stainless steel side trim panel fits enclosures with a depth of 600 mm. It offers a brushed finish and Type 4X rating for high durability.

Base/plinth trim panels are used depth-wise for laterally closing a base/plinth unit. The trim panel can be used in between two bayed enclosures to stabilize the base/plinth corner pieces. The 100 mm high trim panels can also be used and combined in 200 mm...

This side trim panel, 100 mm high, completes the base/plinth unit for VX enclosures, providing additional stability and compatibility with bayed units. It is made from sheet steel with a RAL 9005 finish.

This base/plinth trim panel is designed to provide side finishing for base/plinth systems, adding stability or facilitating interior configurations of bayed units. Constructed from sheet steel in RAL 9005, it can be configured with either a single 200 mm high or dual 100 mm...